ASoC: rt5677: Hide platform data in the module sources

There is no user of legacy platform data.

Remove separate header and hide its content inside module sources.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

include/sound/rt5677.h

-/*
- * linux/sound/rt5677.h -- Platform data for RT5677
- *
- * Copyright 2013 Realtek Semiconductor Corp.
- * Author: Oder Chiou <oder_chiou@realtek.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __LINUX_SND_RT5677_H
-#define __LINUX_SND_RT5677_H
-
-enum rt5677_dmic2_clk {
-	RT5677_DMIC_CLK1 = 0,
-	RT5677_DMIC_CLK2 = 1,
-};
-
-
-struct rt5677_platform_data {
-	/* IN1/IN2/LOUT1/LOUT2/LOUT3 can optionally be differential */
-	bool in1_diff;
-	bool in2_diff;
-	bool lout1_diff;
-	bool lout2_diff;
-	bool lout3_diff;
-	/* DMIC2 clock source selection */
-	enum rt5677_dmic2_clk dmic2_clk_pin;
-
-	/* configures GPIO, 0 - floating, 1 - pulldown, 2 - pullup */
-	u8 gpio_config[6];
-
-	/* jd1 can select 0 ~ 3 as OFF, GPIO1, GPIO2 and GPIO3 respectively */
-	unsigned int jd1_gpio;
-	/* jd2 and jd3 can select 0 ~ 3 as
-		OFF, GPIO4, GPIO5 and GPIO6 respectively */
-	unsigned int jd2_gpio;
-	unsigned int jd3_gpio;
-
-	/* Set MICBIAS1 VDD 1v8 or 3v3 */
-	bool micbias1_vdd_3v3;
-};
-
-#endif

sound/soc/codecs/rt5677.c

@@ -21,6 +21,7 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/firmware.h>
+#include <linux/of_device.h>
 #include <linux/property.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
@@ -5019,25 +5020,21 @@ static const struct regmap_config rt5677_regmap = {
 };
 
 static const struct i2c_device_id rt5677_i2c_id[] = {
-	{ "rt5677", RT5677 },
-	{ "rt5676", RT5676 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, rt5677_i2c_id);
 
 static const struct of_device_id rt5677_of_match[] = {
-	{ .compatible = "realtek,rt5677", },
+	{ .compatible = "realtek,rt5677", RT5677 },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, rt5677_of_match);
 
-#ifdef CONFIG_ACPI
 static const struct acpi_device_id rt5677_acpi_match[] = {
 	{ "RT5677CE", RT5677 },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, rt5677_acpi_match);
-#endif
 
 static void rt5677_read_acpi_properties(struct rt5677_priv *rt5677,
 		struct device *dev)
@@ -5147,7 +5144,6 @@ static void rt5677_free_irq(struct i2c_client *i2c)
 static int rt5677_i2c_probe(struct i2c_client *i2c,
 		    const struct i2c_device_id *id)
 {
-	struct rt5677_platform_data *pdata = dev_get_platdata(&i2c->dev);
 	struct rt5677_priv *rt5677;
 	int ret;
 	unsigned int val;
@@ -5159,16 +5155,25 @@ static int rt5677_i2c_probe(struct i2c_client *i2c,
 
 	i2c_set_clientdata(i2c, rt5677);
 
-	rt5677->type = id->driver_data;
+	if (i2c->dev.of_node) {
+		const struct of_device_id *match_id;
+
+		match_id = of_match_device(rt5677_of_match, &i2c->dev);
+		if (match_id)
+			rt5677->type = (enum rt5677_type)match_id->data;
 
-	if (pdata)
-		rt5677->pdata = *pdata;
-	else if (i2c->dev.of_node)
 		rt5677_read_device_properties(rt5677, &i2c->dev);
-	else if (ACPI_HANDLE(&i2c->dev))
+	} else if (ACPI_HANDLE(&i2c->dev)) {
+		const struct acpi_device_id *acpi_id;
+
+		acpi_id = acpi_match_device(rt5677_acpi_match, &i2c->dev);
+		if (acpi_id)
+			rt5677->type = (enum rt5677_type)acpi_id->driver_data;
+
 		rt5677_read_acpi_properties(rt5677, &i2c->dev);
-	else
+	} else {
 		return -EINVAL;
+	}
 
 	/* pow-ldo2 and reset are optional. The codec pins may be statically
 	 * connected on the board without gpios. If the gpio device property

sound/soc/codecs/rt5677.h

@@ -12,7 +12,6 @@
 #ifndef __RT5677_H__
 #define __RT5677_H__
 
-#include <sound/rt5677.h>
 #include <linux/gpio/driver.h>
 #include <linux/gpio/consumer.h>
 
@@ -1761,6 +1760,35 @@ enum {
 	RT5677_I2S4_SOURCE = (0x1 << 18),
 };
 
+enum rt5677_dmic2_clk {
+	RT5677_DMIC_CLK1 = 0,
+	RT5677_DMIC_CLK2 = 1,
+};
+
+struct rt5677_platform_data {
+	/* IN1/IN2/LOUT1/LOUT2/LOUT3 can optionally be differential */
+	bool in1_diff;
+	bool in2_diff;
+	bool lout1_diff;
+	bool lout2_diff;
+	bool lout3_diff;
+	/* DMIC2 clock source selection */
+	enum rt5677_dmic2_clk dmic2_clk_pin;
+
+	/* configures GPIO, 0 - floating, 1 - pulldown, 2 - pullup */
+	u8 gpio_config[6];
+
+	/* jd1 can select 0 ~ 3 as OFF, GPIO1, GPIO2 and GPIO3 respectively */
+	unsigned int jd1_gpio;
+	/* jd2 and jd3 can select 0 ~ 3 as
+		OFF, GPIO4, GPIO5 and GPIO6 respectively */
+	unsigned int jd2_gpio;
+	unsigned int jd3_gpio;
+
+	/* Set MICBIAS1 VDD 1v8 or 3v3 */
+	bool micbias1_vdd_3v3;
+};
+
 struct rt5677_priv {
 	struct snd_soc_codec *codec;
 	struct rt5677_platform_data pdata;