Commit de8cc234 authored by Sachin Kamat's avatar Sachin Kamat Committed by Mark Brown

spi: atmel: Fix incorrect error path

'irq' was not released when clk_prepare_enable failed.
Fix it.
Signed-off-by: default avatarSachin Kamat <sachin.kamat@linaro.org>
Acked-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
parent d0e639c9
......@@ -1583,7 +1583,7 @@ static int atmel_spi_probe(struct platform_device *pdev)
/* Initialize the hardware */
ret = clk_prepare_enable(clk);
if (ret)
goto out_unmap_regs;
goto out_free_irq;
spi_writel(as, CR, SPI_BIT(SWRST));
spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
if (as->caps.has_wdrbt) {
......@@ -1614,6 +1614,7 @@ static int atmel_spi_probe(struct platform_device *pdev)
spi_writel(as, CR, SPI_BIT(SWRST));
spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
clk_disable_unprepare(clk);
out_free_irq:
free_irq(irq, master);
out_unmap_regs:
iounmap(as->regs);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment