i40evf: Remove PF specific register definitions from the VF

There were quite a few issues when the wrong defines were getting used
in the VF driver. This patch fixes the code where PF driver registers
were getting used for VF driver, and also removes the registers that are
not being used from the VF register file.

Change-ID: If116a9730112950d006eb8ec763998fc914cc839
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Acked-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/i40evf/i40e_adminq.c

@@ -60,17 +60,6 @@ static void i40e_adminq_init_regs(struct i40e_hw *hw)
 		hw->aq.arq.len  = I40E_VF_ARQLEN1;
 		hw->aq.arq.bal  = I40E_VF_ARQBAL1;
 		hw->aq.arq.bah  = I40E_VF_ARQBAH1;
-	} else {
-		hw->aq.asq.tail = I40E_PF_ATQT;
-		hw->aq.asq.head = I40E_PF_ATQH;
-		hw->aq.asq.len  = I40E_PF_ATQLEN;
-		hw->aq.asq.bal  = I40E_PF_ATQBAL;
-		hw->aq.asq.bah  = I40E_PF_ATQBAH;
-		hw->aq.arq.tail = I40E_PF_ARQT;
-		hw->aq.arq.head = I40E_PF_ARQH;
-		hw->aq.arq.len  = I40E_PF_ARQLEN;
-		hw->aq.arq.bal  = I40E_PF_ARQBAL;
-		hw->aq.arq.bah  = I40E_PF_ARQBAH;
 	}
 }
 
@@ -308,7 +297,7 @@ static i40e_status i40e_config_asq_regs(struct i40e_hw *hw)
 
 	/* set starting point */
 	wr32(hw, hw->aq.asq.len, (hw->aq.num_asq_entries |
-				  I40E_PF_ATQLEN_ATQENABLE_MASK));
+				  I40E_VF_ATQLEN1_ATQENABLE_MASK));
 	wr32(hw, hw->aq.asq.bal, lower_32_bits(hw->aq.asq.desc_buf.pa));
 	wr32(hw, hw->aq.asq.bah, upper_32_bits(hw->aq.asq.desc_buf.pa));
 
@@ -337,7 +326,7 @@ static i40e_status i40e_config_arq_regs(struct i40e_hw *hw)
 
 	/* set starting point */
 	wr32(hw, hw->aq.arq.len, (hw->aq.num_arq_entries |
-				  I40E_PF_ARQLEN_ARQENABLE_MASK));
+				  I40E_VF_ARQLEN1_ARQENABLE_MASK));
 	wr32(hw, hw->aq.arq.bal, lower_32_bits(hw->aq.arq.desc_buf.pa));
 	wr32(hw, hw->aq.arq.bah, upper_32_bits(hw->aq.arq.desc_buf.pa));
 
@@ -899,7 +888,7 @@ i40e_status i40evf_clean_arq_element(struct i40e_hw *hw,
 	mutex_lock(&hw->aq.arq_mutex);
 
 	/* set next_to_use to head */
-	ntu = (rd32(hw, hw->aq.arq.head) & I40E_PF_ARQH_ARQH_MASK);
+	ntu = (rd32(hw, hw->aq.arq.head) & I40E_VF_ARQH1_ARQH_MASK);
 	if (ntu == ntc) {
 		/* nothing to do - shouldn't need to update ring's values */
 		ret_code = I40E_ERR_ADMIN_QUEUE_NO_WORK;

drivers/net/ethernet/intel/i40evf/i40e_common.c

@@ -361,7 +361,7 @@ bool i40evf_check_asq_alive(struct i40e_hw *hw)
 {
 	if (hw->aq.asq.len)
 		return !!(rd32(hw, hw->aq.asq.len) &
-			  I40E_PF_ATQLEN_ATQENABLE_MASK);
+			  I40E_VF_ATQLEN1_ATQENABLE_MASK);
 	else
 		return false;
 }