Commit e14538e0 authored by Jonas Jensen's avatar Jonas Jensen Committed by Wim Van Sebroeck

watchdog: Add MOXA ART watchdog driver

This patch adds a watchdog driver for the main hardware watchdog timer
found on MOXA ART SoCs.

The MOXA ART SoC provides one writable timer register, restarting
the hardware once it reaches zero. The register is auto decremented
every APB clock cycle.
Signed-off-by: default avatarJonas Jensen <jonas.jensen@gmail.com>
Reviewed-by: default avatarGuenter Roeck <linux@roeck-us.net>
Signed-off-by: default avatarWim Van Sebroeck <wim@iguana.be>
parent b3970bde
MOXA ART Watchdog timer
Required properties:
- compatible : Must be "moxa,moxart-watchdog"
- reg : Should contain registers location and length
- clocks : Should contain phandle for the clock that drives the counter
Example:
watchdog: watchdog@98500000 {
compatible = "moxa,moxart-watchdog";
reg = <0x98500000 0x10>;
clocks = <&coreclk>;
};
......@@ -392,6 +392,16 @@ config RETU_WATCHDOG
To compile this driver as a module, choose M here: the
module will be called retu_wdt.
config MOXART_WDT
tristate "MOXART watchdog"
depends on ARCH_MOXART
help
Say Y here to include Watchdog timer support for the watchdog
existing on the MOXA ART SoC series platforms.
To compile this driver as a module, choose M here: the
module will be called moxart_wdt.
# AVR32 Architecture
config AT32AP700X_WDT
......
......@@ -55,6 +55,7 @@ obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o
obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
obj-$(CONFIG_MOXART_WDT) += moxart_wdt.o
# AVR32 Architecture
obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
......
/*
* MOXA ART SoCs watchdog driver.
*
* Copyright (C) 2013 Jonas Jensen
*
* Jonas Jensen <jonas.jensen@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/watchdog.h>
#include <linux/moduleparam.h>
#define REG_COUNT 0x4
#define REG_MODE 0x8
#define REG_ENABLE 0xC
struct moxart_wdt_dev {
struct watchdog_device dev;
void __iomem *base;
unsigned int clock_frequency;
};
static int heartbeat;
static int moxart_wdt_stop(struct watchdog_device *wdt_dev)
{
struct moxart_wdt_dev *moxart_wdt = watchdog_get_drvdata(wdt_dev);
writel(0, moxart_wdt->base + REG_ENABLE);
return 0;
}
static int moxart_wdt_start(struct watchdog_device *wdt_dev)
{
struct moxart_wdt_dev *moxart_wdt = watchdog_get_drvdata(wdt_dev);
writel(moxart_wdt->clock_frequency * wdt_dev->timeout,
moxart_wdt->base + REG_COUNT);
writel(0x5ab9, moxart_wdt->base + REG_MODE);
writel(0x03, moxart_wdt->base + REG_ENABLE);
return 0;
}
static int moxart_wdt_set_timeout(struct watchdog_device *wdt_dev,
unsigned int timeout)
{
wdt_dev->timeout = timeout;
return 0;
}
static const struct watchdog_info moxart_wdt_info = {
.identity = "moxart-wdt",
.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
WDIOF_MAGICCLOSE,
};
static const struct watchdog_ops moxart_wdt_ops = {
.owner = THIS_MODULE,
.start = moxart_wdt_start,
.stop = moxart_wdt_stop,
.set_timeout = moxart_wdt_set_timeout,
};
static int moxart_wdt_probe(struct platform_device *pdev)
{
struct moxart_wdt_dev *moxart_wdt;
struct device *dev = &pdev->dev;
struct device_node *node = dev->of_node;
struct resource *res;
struct clk *clk;
int err;
unsigned int max_timeout;
bool nowayout = WATCHDOG_NOWAYOUT;
moxart_wdt = devm_kzalloc(dev, sizeof(*moxart_wdt), GFP_KERNEL);
if (!moxart_wdt)
return -ENOMEM;
platform_set_drvdata(pdev, moxart_wdt);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
moxart_wdt->base = devm_ioremap_resource(dev, res);
if (IS_ERR(moxart_wdt->base))
return PTR_ERR(moxart_wdt->base);
clk = of_clk_get(node, 0);
if (IS_ERR(clk)) {
pr_err("%s: of_clk_get failed\n", __func__);
return PTR_ERR(clk);
}
moxart_wdt->clock_frequency = clk_get_rate(clk);
if (moxart_wdt->clock_frequency == 0) {
pr_err("%s: incorrect clock frequency\n", __func__);
return -EINVAL;
}
max_timeout = UINT_MAX / moxart_wdt->clock_frequency;
moxart_wdt->dev.info = &moxart_wdt_info;
moxart_wdt->dev.ops = &moxart_wdt_ops;
moxart_wdt->dev.timeout = max_timeout;
moxart_wdt->dev.min_timeout = 1;
moxart_wdt->dev.max_timeout = max_timeout;
moxart_wdt->dev.parent = dev;
watchdog_init_timeout(&moxart_wdt->dev, heartbeat, dev);
watchdog_set_nowayout(&moxart_wdt->dev, nowayout);
watchdog_set_drvdata(&moxart_wdt->dev, moxart_wdt);
err = watchdog_register_device(&moxart_wdt->dev);
if (err)
return err;
dev_dbg(dev, "Watchdog enabled (heartbeat=%d sec, nowayout=%d)\n",
moxart_wdt->dev.timeout, nowayout);
return 0;
}
static int moxart_wdt_remove(struct platform_device *pdev)
{
struct moxart_wdt_dev *moxart_wdt = platform_get_drvdata(pdev);
moxart_wdt_stop(&moxart_wdt->dev);
watchdog_unregister_device(&moxart_wdt->dev);
return 0;
}
static const struct of_device_id moxart_watchdog_match[] = {
{ .compatible = "moxa,moxart-watchdog" },
{ },
};
static struct platform_driver moxart_wdt_driver = {
.probe = moxart_wdt_probe,
.remove = moxart_wdt_remove,
.driver = {
.name = "moxart-watchdog",
.owner = THIS_MODULE,
.of_match_table = moxart_watchdog_match,
},
};
module_platform_driver(moxart_wdt_driver);
module_param(heartbeat, int, 0);
MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds");
MODULE_DESCRIPTION("MOXART watchdog driver");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jonas Jensen <jonas.jensen@gmail.com>");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment