[PATCH] USB: kobil_sct driver for 2.5.50

drivers/usb/serial/Kconfig

@@ -326,6 +326,25 @@ config USB_SERIAL_KLSI
 	  The module will be called kl5kusb105.o. If you want to compile it as
 	  a module, say M here and read <file:Documentation/modules.txt>.
 
+config USB_SERIAL_KOBIL_SCT
+        tristate "USB KOBIL chipcard reader (EXPERIMENTAL)"
+        depends on USB_SERIAL && EXPERIMENTAL
+        ---help---
+          Say Y here if you want to use one of the following KOBIL USB chipcard
+          readers:
+
+            - USB TWIN
+            - KAAN Standard Plus
+            - SecOVID Reader Plus
+            - B1 Professional
+            - KAAN Professional
+
+          Note that you need a current CT-API.
+          This code is also available as a module ( = code which can be
+          inserted in and removed from the running kernel whenever you want).
+          The module will be called kobil_sct.o. If you want to compile it as
+          a module, say M here and read <file:Documentation/modules.txt>.
+
 config USB_SERIAL_MCT_U232
 	tristate "USB MCT Single Port Serial Driver"
 	depends on USB_SERIAL

drivers/usb/serial/Makefile

@@ -24,6 +24,7 @@ obj-$(CONFIG_USB_SERIAL_MCT_U232)		+= mct_u232.o
 obj-$(CONFIG_USB_SERIAL_EDGEPORT)		+= io_edgeport.o
 obj-$(CONFIG_USB_SERIAL_EDGEPORT_TI)		+= io_ti.o
 obj-$(CONFIG_USB_SERIAL_PL2303)			+= pl2303.o
+obj-$(CONFIG_USB_SERIAL_KOBIL_SCT)		+= kobil_sct.o
 obj-$(CONFIG_USB_SERIAL_CYBERJACK)		+= cyberjack.o
 obj-$(CONFIG_USB_SERIAL_IR)			+= ir-usb.o
 obj-$(CONFIG_USB_SERIAL_KLSI)			+= kl5kusb105.o

drivers/usb/serial/kobil_sct.h

+#define SUSBCRequest_SetBaudRateParityAndStopBits       1
+#define SUSBCR_SBR_MASK				0xFF00
+#define SUSBCR_SBR_1200				0x0100
+#define SUSBCR_SBR_9600				0x0200
+#define SUSBCR_SBR_19200			0x0400
+#define SUSBCR_SBR_28800			0x0800
+#define SUSBCR_SBR_38400			0x1000
+#define SUSBCR_SBR_57600			0x2000
+#define SUSBCR_SBR_115200			0x4000
+
+#define SUSBCR_SPASB_MASK			0x0070
+#define SUSBCR_SPASB_NoParity			0x0010
+#define SUSBCR_SPASB_OddParity			0x0020
+#define SUSBCR_SPASB_EvenParity			0x0040
+
+#define SUSBCR_SPASB_STPMASK			0x0003
+#define SUSBCR_SPASB_1StopBit			0x0001
+#define SUSBCR_SPASB_2StopBits			0x0002
+
+#define SUSBCRequest_SetStatusLinesOrQueues	2
+#define SUSBCR_SSL_SETRTS			0x0001
+#define SUSBCR_SSL_CLRRTS			0x0002
+#define SUSBCR_SSL_SETDTR			0x0004
+#define SUSBCR_SSL_CLRDTR			0x0010
+
+#define SUSBCR_SSL_PURGE_TXABORT		0x0100  // Kill the pending/current writes to the comm port.
+#define SUSBCR_SSL_PURGE_RXABORT		0x0200  // Kill the pending/current reads to the comm port.
+#define SUSBCR_SSL_PURGE_TXCLEAR		0x0400  // Kill the transmit queue if there.
+#define SUSBCR_SSL_PURGE_RXCLEAR		0x0800  // Kill the typeahead buffer if there.
+
+#define SUSBCRequest_GetStatusLineState		4
+#define SUSBCR_GSL_RXCHAR			0x0001  // Any Character received
+#define SUSBCR_GSL_TXEMPTY			0x0004  // Transmitt Queue Empty
+#define SUSBCR_GSL_CTS				0x0008  // CTS changed state
+#define SUSBCR_GSL_DSR				0x0010  // DSR changed state
+#define SUSBCR_GSL_RLSD				0x0020  // RLSD changed state
+#define SUSBCR_GSL_BREAK			0x0040  // BREAK received
+#define SUSBCR_GSL_ERR				0x0080  // Line status error occurred
+#define SUSBCR_GSL_RING				0x0100  // Ring signal detected
+
+#define SUSBCRequest_Misc			8
+#define SUSBCR_MSC_ResetReader			0x0001	// use a predefined reset sequence
+#define SUSBCR_MSC_ResetAllQueues		0x0002	// use a predefined sequence to reset the internal queues
+
+#define SUSBCRequest_GetMisc			0x10
+#define SUSBCR_MSC_GetFWVersion			0x0001	/* get the firmware version from device,
+							   coded like this 0xHHLLBBPP
+							   with HH = Firmware Version High Byte
+							   LL = Firmware Version Low Byte
+							   BB = Build Number
+							   PP = Further Attributes
+							*/
+
+#define SUSBCR_MSC_GetHWVersion			0x0002	/* get the hardware version from device
+							   coded like this 0xHHLLPPRR
+							   with HH = Software Version High Byte
+							   LL = Software Version Low Byte
+							   PP = Further Attributes
+							   RR = Reserved for the hardware ID 
+							*/