KVM: s390: ucontrol: export page faults to user

This patch introduces a new exit reason in the kvm_run structure
named KVM_EXIT_S390_UCONTROL. This exit indicates, that a virtual cpu
has regognized a fault on the host page table. The idea is that
userspace can handle this fault by mapping memory at the fault
location into the cpu's address space and then continue to run the
virtual cpu.
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

Documentation/virtual/kvm/api.txt

@@ -1694,6 +1694,20 @@ s390 specific.
 
 s390 specific.
 
+		/* KVM_EXIT_S390_UCONTROL */
+		struct {
+			__u64 trans_exc_code;
+			__u32 pgm_code;
+		} s390_ucontrol;
+
+s390 specific. A page fault has occurred for a user controlled virtual
+machine (KVM_VM_S390_UNCONTROL) on it's host page table that cannot be
+resolved by the kernel.
+The program code and the translation exception code that were placed
+in the cpu's lowcore are presented here as defined by the z Architecture
+Principles of Operation Book in the Chapter for Dynamic Address Translation
+(DAT)
+
 		/* KVM_EXIT_DCR */
 		struct {
 			__u32 dcrn;

arch/s390/kvm/kvm-s390.c

@@ -493,8 +493,10 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
 	return -EINVAL; /* not implemented yet */
 }
 
-static void __vcpu_run(struct kvm_vcpu *vcpu)
+static int __vcpu_run(struct kvm_vcpu *vcpu)
 {
+	int rc;
+
 	memcpy(&vcpu->arch.sie_block->gg14, &vcpu->arch.guest_gprs[14], 16);
 
 	if (need_resched())
@@ -511,9 +513,15 @@ static void __vcpu_run(struct kvm_vcpu *vcpu)
 	local_irq_enable();
 	VCPU_EVENT(vcpu, 6, "entering sie flags %x",
 		   atomic_read(&vcpu->arch.sie_block->cpuflags));
-	if (sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs)) {
-		VCPU_EVENT(vcpu, 3, "%s", "fault in sie instruction");
-		kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
+	rc = sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs);
+	if (rc) {
+		if (kvm_is_ucontrol(vcpu->kvm)) {
+			rc = SIE_INTERCEPT_UCONTROL;
+		} else {
+			VCPU_EVENT(vcpu, 3, "%s", "fault in sie instruction");
+			kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
+			rc = 0;
+		}
 	}
 	VCPU_EVENT(vcpu, 6, "exit sie icptcode %d",
 		   vcpu->arch.sie_block->icptcode);
@@ -522,6 +530,7 @@ static void __vcpu_run(struct kvm_vcpu *vcpu)
 	local_irq_enable();
 
 	memcpy(&vcpu->arch.guest_gprs[14], &vcpu->arch.sie_block->gg14, 16);
+	return rc;
 }
 
 int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
@@ -542,6 +551,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	case KVM_EXIT_UNKNOWN:
 	case KVM_EXIT_INTR:
 	case KVM_EXIT_S390_RESET:
+	case KVM_EXIT_S390_UCONTROL:
 		break;
 	default:
 		BUG();
@@ -553,7 +563,9 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	might_fault();
 
 	do {
-		__vcpu_run(vcpu);
+		rc = __vcpu_run(vcpu);
+		if (rc)
+			break;
 		rc = kvm_handle_sie_intercept(vcpu);
 	} while (!signal_pending(current) && !rc);
 
@@ -565,6 +577,16 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		rc = -EINTR;
 	}
 
+#ifdef CONFIG_KVM_S390_UCONTROL
+	if (rc == SIE_INTERCEPT_UCONTROL) {
+		kvm_run->exit_reason = KVM_EXIT_S390_UCONTROL;
+		kvm_run->s390_ucontrol.trans_exc_code =
+			current->thread.gmap_addr;
+		kvm_run->s390_ucontrol.pgm_code = 0x10;
+		rc = 0;
+	}
+#endif
+
 	if (rc == -EOPNOTSUPP) {
 		/* intercept cannot be handled in-kernel, prepare kvm-run */
 		kvm_run->exit_reason         = KVM_EXIT_S390_SIEIC;

arch/s390/kvm/kvm-s390.h

@@ -26,6 +26,7 @@ typedef int (*intercept_handler_t)(struct kvm_vcpu *vcpu);
 
 /* negativ values are error codes, positive values for internal conditions */
 #define SIE_INTERCEPT_RERUNVCPU		(1<<0)
+#define SIE_INTERCEPT_UCONTROL		(1<<1)
 int kvm_handle_sie_intercept(struct kvm_vcpu *vcpu);
 
 #define VM_EVENT(d_kvm, d_loglevel, d_string, d_args...)\

include/linux/kvm.h

@@ -162,6 +162,7 @@ struct kvm_pit_config {
 #define KVM_EXIT_INTERNAL_ERROR   17
 #define KVM_EXIT_OSI              18
 #define KVM_EXIT_PAPR_HCALL	  19
+#define KVM_EXIT_S390_UCONTROL	  20
 
 /* For KVM_EXIT_INTERNAL_ERROR */
 #define KVM_INTERNAL_ERROR_EMULATION 1
@@ -249,6 +250,11 @@ struct kvm_run {
 #define KVM_S390_RESET_CPU_INIT  8
 #define KVM_S390_RESET_IPL       16
 		__u64 s390_reset_flags;
+		/* KVM_EXIT_S390_UCONTROL */
+		struct {
+			__u64 trans_exc_code;
+			__u32 pgm_code;
+		} s390_ucontrol;
 		/* KVM_EXIT_DCR */
 		struct {
 			__u32 dcrn;