Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  [AVR32] Fix wrong pt_regs in critical exception handler
  [AVR32] Fix copy_to_user_page() breakage
  [AVR32] Follow the rules when dealing with the OCD system
  [AVR32] Clean up OCD register usage
  [AVR32] Implement irqflags trace and lockdep support
  [AVR32] Implement stacktrace support
  [AVR32] Kconfig: Use def_bool instead of bool + default
  [AVR32] Fix invalid status register bit definitions in asm/ptrace.h
  [AVR32] Add TIF_RESTORE_SIGMASK to the work masks

arch/avr32/Kconfig

@@ -6,8 +6,7 @@
 mainmenu "Linux Kernel Configuration"
 
 config AVR32
-	bool
-	default y
+	def_bool y
 	# With EMBEDDED=n, we get lots of stuff automatically selected
 	# that we usually don't need on AVR32.
 	select EMBEDDED
@@ -20,51 +19,49 @@ config AVR32
 	  http://avr32linux.org/.
 
 config GENERIC_GPIO
-	bool
-	default y
+	def_bool y
 
 config GENERIC_HARDIRQS
-	bool
-	default y
+	def_bool y
+
+config STACKTRACE_SUPPORT
+	def_bool y
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+	def_bool y
 
 config HARDIRQS_SW_RESEND
-	bool
-	default y
+	def_bool y
 
 config GENERIC_IRQ_PROBE
-	bool
-	default y
+	def_bool y
 
 config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
+	def_bool y
 
 config GENERIC_TIME
-	bool
-	default y
+	def_bool y
 
 config RWSEM_XCHGADD_ALGORITHM
-	bool
+	def_bool n
 
 config ARCH_HAS_ILOG2_U32
-	bool
-	default n
+	def_bool n
 
 config ARCH_HAS_ILOG2_U64
-	bool
-	default n
+	def_bool n
 
 config GENERIC_HWEIGHT
-	bool
-	default y
+	def_bool y
 
 config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
+	def_bool y
 
 config GENERIC_BUG
-	bool
-	default y
+	def_bool y
 	depends on BUG
 
 source "init/Kconfig"
@@ -139,28 +136,22 @@ config PHYS_OFFSET
 source "kernel/Kconfig.preempt"
 
 config HAVE_ARCH_BOOTMEM_NODE
-	bool
-	default n
+	def_bool n
 
 config ARCH_HAVE_MEMORY_PRESENT
-	bool
-	default n
+	def_bool n
 
 config NEED_NODE_MEMMAP_SIZE
-	bool
-	default n
+	def_bool n
 
 config ARCH_FLATMEM_ENABLE
-	bool
-	default y
+	def_bool y
 
 config ARCH_DISCONTIGMEM_ENABLE
-	bool
-	default n
+	def_bool n
 
 config ARCH_SPARSEMEM_ENABLE
-	bool
-	default n
+	def_bool n
 
 source "mm/Kconfig"
 

arch/avr32/kernel/Makefile

@@ -11,3 +11,4 @@ obj-y				+= signal.o sys_avr32.o process.o time.o
 obj-y				+= init_task.o switch_to.o cpu.o
 obj-$(CONFIG_MODULES)		+= module.o avr32_ksyms.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
+obj-$(CONFIG_STACKTRACE)	+= stacktrace.o

arch/avr32/kernel/asm-offsets.c

@@ -21,5 +21,7 @@ void foo(void)
 	OFFSET(TI_flags, thread_info, flags);
 	OFFSET(TI_cpu, thread_info, cpu);
 	OFFSET(TI_preempt_count, thread_info, preempt_count);
+	OFFSET(TI_rar_saved, thread_info, rar_saved);
+	OFFSET(TI_rsr_saved, thread_info, rsr_saved);
 	OFFSET(TI_restart_block, thread_info, restart_block);
 }

arch/avr32/kernel/entry-avr32b.S

@@ -264,16 +264,7 @@ syscall_exit_work:
 
 3:	bld	r1, TIF_BREAKPOINT
 	brcc	syscall_exit_cont
-	mfsr	r3, SYSREG_TLBEHI
-	lddsp	r2, sp[REG_PC]
-	andl	r3, 0xff, COH
-	lsl	r3, 1
-	sbr	r3, 30
-	sbr	r3, 0
-	mtdr	DBGREG_BWA2A, r2
-	mtdr	DBGREG_BWC2A, r3
-	rjmp	syscall_exit_cont
-
+	rjmp	enter_monitor_mode
 
 	/* The slow path of the TLB miss handler */
 page_table_not_present:
@@ -288,11 +279,16 @@ page_not_present:
 	rjmp	ret_from_exception
 
 	/* This function expects to find offending PC in SYSREG_RAR_EX */
+	.type	save_full_context_ex, @function
+	.align	2
 save_full_context_ex:
+	mfsr	r11, SYSREG_RAR_EX
+	sub	r9, pc, . - debug_trampoline
 	mfsr	r8, SYSREG_RSR_EX
+	cp.w	r9, r11
+	breq	3f
 	mov	r12, r8
 	andh	r8, (MODE_MASK >> 16), COH
-	mfsr	r11, SYSREG_RAR_EX
 	brne	2f
 
 1:	pushm	r11, r12	/* PC and SR */
@@ -303,10 +299,25 @@ save_full_context_ex:
 	stdsp	sp[4], r10	/* replace saved SP */
 	rjmp	1b
 
+	/*
+	 * The debug handler set up a trampoline to make us
+	 * automatically enter monitor mode upon return, but since
+	 * we're saving the full context, we must assume that the
+	 * exception handler might want to alter the return address
+	 * and/or status register. So we need to restore the original
+	 * context and enter monitor mode manually after the exception
+	 * has been handled.
+	 */
+3:	get_thread_info r8
+	ld.w	r11, r8[TI_rar_saved]
+	ld.w	r12, r8[TI_rsr_saved]
+	rjmp	1b
+	.size	save_full_context_ex, . - save_full_context_ex
+
 	/* Low-level exception handlers */
 handle_critical:
-	pushm	r12
-	pushm	r0-r12
+	sub	sp, 4
+	stmts	--sp, r0-lr
 	rcall	save_full_context_ex
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
@@ -439,6 +450,7 @@ do_fpe_ll:
 ret_from_exception:
 	mask_interrupts
 	lddsp	r4, sp[REG_SR]
+
 	andh	r4, (MODE_MASK >> 16), COH
 	brne	fault_resume_kernel
 
@@ -515,119 +527,124 @@ fault_exit_work:
 
 2:	bld	r1, TIF_BREAKPOINT
 	brcc	fault_resume_user
-	mfsr	r3, SYSREG_TLBEHI
-	lddsp	r2, sp[REG_PC]
-	andl	r3, 0xff, COH
-	lsl	r3, 1
-	sbr	r3, 30
-	sbr	r3, 0
-	mtdr	DBGREG_BWA2A, r2
-	mtdr	DBGREG_BWC2A, r3
-	rjmp	fault_resume_user
-
-	/* If we get a debug trap from privileged context we end up here */
-handle_debug_priv:
-	/* Fix up LR and SP in regs. r11 contains the mode we came from */
+	rjmp	enter_monitor_mode
+
+	.section .kprobes.text, "ax", @progbits
+	.type	handle_debug, @function
+handle_debug:
+	sub	sp, 4		/* r12_orig */
+	stmts	--sp, r0-lr
+	mfsr	r8, SYSREG_RAR_DBG
+	mfsr	r9, SYSREG_RSR_DBG
+	unmask_exceptions
+	pushm	r8-r9
+	bfextu	r9, r9, SYSREG_MODE_OFFSET, SYSREG_MODE_SIZE
+	brne	debug_fixup_regs
+
+.Ldebug_fixup_cont:
+#ifdef CONFIG_TRACE_IRQFLAGS
+	rcall	trace_hardirqs_off
+#endif
+	mov	r12, sp
+	rcall	do_debug
+	mov	sp, r12
+
+	lddsp	r2, sp[REG_SR]
+	bfextu	r3, r2, SYSREG_MODE_OFFSET, SYSREG_MODE_SIZE
+	brne	debug_resume_kernel
+
+	get_thread_info r0
+	ld.w	r1, r0[TI_flags]
+	mov	r2, _TIF_DBGWORK_MASK
+	tst	r1, r2
+	brne	debug_exit_work
+
+	bld	r1, TIF_SINGLE_STEP
+	brcc	1f
+	mfdr	r4, OCD_DC
+	sbr	r4, OCD_DC_SS_BIT
+	mtdr	OCD_DC, r4
+
+1:	popm	r10,r11
+	mask_exceptions
+	mtsr	SYSREG_RSR_DBG, r11
+	mtsr	SYSREG_RAR_DBG, r10
+#ifdef CONFIG_TRACE_IRQFLAGS
+	rcall	trace_hardirqs_on
+1:
+#endif
+	ldmts	sp++, r0-lr
+	sub	sp, -4
+	retd
+	.size	handle_debug, . - handle_debug
+
+	/* Mode of the trapped context is in r9 */
+	.type	debug_fixup_regs, @function
+debug_fixup_regs:
 	mfsr	r8, SYSREG_SR
-	mov	r9, r8
-	andh	r8, hi(~MODE_MASK)
-	or	r8, r11
+	mov	r10, r8
+	bfins	r8, r9, SYSREG_MODE_OFFSET, SYSREG_MODE_SIZE
 	mtsr	SYSREG_SR, r8
 	sub	pc, -2
 	stdsp	sp[REG_LR], lr
-	mtsr	SYSREG_SR, r9
+	mtsr	SYSREG_SR, r10
 	sub	pc, -2
-	sub	r10, sp, -FRAME_SIZE_FULL
-	stdsp	sp[REG_SP], r10
-	mov	r12, sp
-	rcall	do_debug_priv
+	sub	r8, sp, -FRAME_SIZE_FULL
+	stdsp	sp[REG_SP], r8
+	rjmp	.Ldebug_fixup_cont
+	.size	debug_fixup_regs, . - debug_fixup_regs
 
-	/* Now, put everything back */
-	ssrf	SR_EM_BIT
+	.type	debug_resume_kernel, @function
+debug_resume_kernel:
+	mask_exceptions
 	popm	r10, r11
 	mtsr	SYSREG_RAR_DBG, r10
 	mtsr	SYSREG_RSR_DBG, r11
-	mfsr	r8, SYSREG_SR
-	mov	r9, r8
-	andh	r8, hi(~MODE_MASK)
-	andh	r11, hi(MODE_MASK)
-	or	r8, r11
-	mtsr	SYSREG_SR, r8
+#ifdef CONFIG_TRACE_IRQFLAGS
+	bld	r11, SYSREG_GM_OFFSET
+	brcc	1f
+	rcall	trace_hardirqs_on
+1:
+#endif
+	mfsr	r2, SYSREG_SR
+	mov	r1, r2
+	bfins	r2, r3, SYSREG_MODE_OFFSET, SYSREG_MODE_SIZE
+	mtsr	SYSREG_SR, r2
 	sub	pc, -2
 	popm	lr
-	mtsr	SYSREG_SR, r9
+	mtsr	SYSREG_SR, r1
 	sub	pc, -2
 	sub	sp, -4		/* skip SP */
 	popm	r0-r12
 	sub	sp, -4
 	retd
+	.size	debug_resume_kernel, . - debug_resume_kernel
 
+	.type	debug_exit_work, @function
+debug_exit_work:
 	/*
-	 * At this point, everything is masked, that is, interrupts,
-	 * exceptions and debugging traps. We might get called from
-	 * interrupt or exception context in some rare cases, but this
-	 * will be taken care of by do_debug(), so we're not going to
-	 * do a 100% correct context save here.
+	 * We must return from Monitor Mode using a retd, and we must
+	 * not schedule since that involves the D bit in SR getting
+	 * cleared by something other than the debug hardware. This
+	 * may cause undefined behaviour according to the Architecture
+	 * manual.
+	 *
+	 * So we fix up the return address and status and return to a
+	 * stub below in Exception mode. From there, we can follow the
+	 * normal exception return path.
+	 *
+	 * The real return address and status registers are stored on
+	 * the stack in the way the exception return path understands,
+	 * so no need to fix anything up there.
 	 */
-handle_debug:
-	sub	sp, 4		/* r12_orig */
-	stmts	--sp, r0-lr
-	mfsr	r10, SYSREG_RAR_DBG
-	mfsr	r11, SYSREG_RSR_DBG
-	unmask_exceptions
-	pushm	r10,r11
-	andh	r11, (MODE_MASK >> 16), COH
-	brne	handle_debug_priv
-
-	mov	r12, sp
-	rcall	do_debug
-
-	lddsp	r10, sp[REG_SR]
-	andh	r10, (MODE_MASK >> 16), COH
-	breq	debug_resume_user
-
-debug_restore_all:
-	popm	r10,r11
-	mask_exceptions
-	mtsr	SYSREG_RSR_DBG, r11
-	mtsr	SYSREG_RAR_DBG, r10
-	ldmts	sp++, r0-lr
-	sub	sp, -4
+	sub	r8, pc, . - fault_exit_work
+	mtsr	SYSREG_RAR_DBG, r8
+	mov	r9, 0
+	orh	r9, hi(SR_EM | SR_GM | MODE_EXCEPTION)
+	mtsr	SYSREG_RSR_DBG, r9
+	sub	pc, -2
 	retd
-
-debug_resume_user:
-	get_thread_info r0
-	mask_interrupts
-
-	ld.w	r1, r0[TI_flags]
-	andl	r1, _TIF_DBGWORK_MASK, COH
-	breq	debug_restore_all
-
-1:	bld	r1, TIF_NEED_RESCHED
-	brcc	2f
-	unmask_interrupts
-	rcall	schedule
-	mask_interrupts
-	ld.w	r1, r0[TI_flags]
-	rjmp	1b
-
-2:	mov	r2, _TIF_SIGPENDING | _TIF_RESTORE_SIGMASK
-	tst	r1, r2
-	breq	3f
-	unmask_interrupts
-	mov	r12, sp
-	mov	r11, r0
-	rcall	do_notify_resume
-	mask_interrupts
-	ld.w	r1, r0[TI_flags]
-	rjmp	1b
-
-3:	bld	r1, TIF_SINGLE_STEP
-	brcc	debug_restore_all
-	mfdr	r2, DBGREG_DC
-	sbr	r2, DC_SS_BIT
-	mtdr	DBGREG_DC, r2
-	rjmp	debug_restore_all
+	.size	debug_exit_work, . - debug_exit_work
 
 	.set	rsr_int0,	SYSREG_RSR_INT0
 	.set	rsr_int1,	SYSREG_RSR_INT1
@@ -675,7 +692,11 @@ irq_level\level:
 	andl	r1, _TIF_WORK_MASK, COH
 	brne	irq_exit_work
 
-1:	popm	r8-r9
+1:
+#ifdef CONFIG_TRACE_IRQFLAGS
+	rcall	trace_hardirqs_on
+#endif
+	popm	r8-r9
 	mtsr	rar_int\level, r8
 	mtsr	rsr_int\level, r9
 	ldmts	sp++,r0-lr
@@ -748,3 +769,53 @@ cpu_idle_enable_int_and_exit:
 	IRQ_LEVEL 1
 	IRQ_LEVEL 2
 	IRQ_LEVEL 3
+
+	.section .kprobes.text, "ax", @progbits
+	.type	enter_monitor_mode, @function
+enter_monitor_mode:
+	/*
+	 * We need to enter monitor mode to do a single step. The
+	 * monitor code will alter the return address so that we
+	 * return directly to the user instead of returning here.
+	 */
+	breakpoint
+	rjmp	breakpoint_failed
+
+	.size	enter_monitor_mode, . - enter_monitor_mode
+
+	.type	debug_trampoline, @function
+	.global	debug_trampoline
+debug_trampoline:
+	/*
+	 * Save the registers on the stack so that the monitor code
+	 * can find them easily.
+	 */
+	sub	sp, 4		/* r12_orig */
+	stmts	--sp, r0-lr
+	get_thread_info	r0
+	ld.w	r8, r0[TI_rar_saved]
+	ld.w	r9, r0[TI_rsr_saved]
+	pushm	r8-r9
+
+	/*
+	 * The monitor code will alter the return address so we don't
+	 * return here.
+	 */
+	breakpoint
+	rjmp	breakpoint_failed
+	.size	debug_trampoline, . - debug_trampoline
+
+	.type breakpoint_failed, @function
+breakpoint_failed:
+	/*
+	 * Something went wrong. Perhaps the debug hardware isn't
+	 * enabled?
+	 */
+	lda.w	r12, msg_breakpoint_failed
+	mov	r11, sp
+	mov	r10, 9		/* SIGKILL */
+	call	die
+1:	rjmp	1b
+
+msg_breakpoint_failed:
+	.asciz	"Failed to enter Debug Mode"

arch/avr32/kernel/kprobes.c

@@ -70,9 +70,9 @@ static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 
 	BUG_ON(!(sysreg_read(SR) & SYSREG_BIT(SR_D)));
 
-	dc = __mfdr(DBGREG_DC);
-	dc |= DC_SS;
-	__mtdr(DBGREG_DC, dc);
+	dc = ocd_read(DC);
+	dc |= 1 << OCD_DC_SS_BIT;
+	ocd_write(DC, dc);
 
 	/*
 	 * We must run the instruction from its original location
@@ -91,9 +91,9 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
 
 	pr_debug("resuming execution at PC=%08lx\n", regs->pc);
 
-	dc = __mfdr(DBGREG_DC);
-	dc &= ~DC_SS;
-	__mtdr(DBGREG_DC, dc);
+	dc = ocd_read(DC);
+	dc &= ~(1 << OCD_DC_SS_BIT);
+	ocd_write(DC, dc);
 
 	*p->addr = BREAKPOINT_INSTRUCTION;
 	flush_icache_range((unsigned long)p->addr,
@@ -261,7 +261,7 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 int __init arch_init_kprobes(void)
 {
 	printk("KPROBES: Enabling monitor mode (MM|DBE)...\n");
-	__mtdr(DBGREG_DC, DC_MM | DC_DBE);
+	ocd_write(DC, (1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT));
 
 	/* TODO: Register kretprobe trampoline */
 	return 0;

arch/avr32/kernel/process.c

@@ -55,8 +55,8 @@ void machine_power_off(void)
 
 void machine_restart(char *cmd)
 {
-	__mtdr(DBGREG_DC, DC_DBE);
-	__mtdr(DBGREG_DC, DC_RES);
+	ocd_write(DC, (1 << OCD_DC_DBE_BIT));
+	ocd_write(DC, (1 << OCD_DC_RES_BIT));
 	while (1) ;
 }
 
@@ -287,10 +287,11 @@ void show_regs_log_lvl(struct pt_regs *regs, const char *log_lvl)
 	       regs->sr & SR_N ? 'N' : 'n',
 	       regs->sr & SR_Z ? 'Z' : 'z',
 	       regs->sr & SR_C ? 'C' : 'c');
-	printk("%sMode bits: %c%c%c%c%c%c%c%c%c\n", log_lvl,
+	printk("%sMode bits: %c%c%c%c%c%c%c%c%c%c\n", log_lvl,
 	       regs->sr & SR_H ? 'H' : 'h',
-	       regs->sr & SR_R ? 'R' : 'r',
 	       regs->sr & SR_J ? 'J' : 'j',
+	       regs->sr & SR_DM ? 'M' : 'm',
+	       regs->sr & SR_D ? 'D' : 'd',
 	       regs->sr & SR_EM ? 'E' : 'e',
 	       regs->sr & SR_I3M ? '3' : '.',
 	       regs->sr & SR_I2M ? '2' : '.',

arch/avr32/kernel/stacktrace.c

+/*
+ * Stack trace management functions
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/sched.h>
+#include <linux/stacktrace.h>
+#include <linux/thread_info.h>
+
+register unsigned long current_frame_pointer asm("r7");
+
+struct stackframe {
+	unsigned long lr;
+	unsigned long fp;
+};
+
+/*
+ * Save stack-backtrace addresses into a stack_trace buffer.
+ */
+void save_stack_trace(struct stack_trace *trace)
+{
+	unsigned long low, high;
+	unsigned long fp;
+	struct stackframe *frame;
+	int skip = trace->skip;
+
+	low = (unsigned long)task_stack_page(current);
+	high = low + THREAD_SIZE;
+	fp = current_frame_pointer;
+
+	while (fp >= low && fp <= (high - 8)) {
+		frame = (struct stackframe *)fp;
+
+		if (skip) {
+			skip--;
+		} else {
+			trace->entries[trace->nr_entries++] = frame->lr;
+			if (trace->nr_entries >= trace->max_entries)
+				break;
+		}
+
+		/*
+		 * The next frame must be at a higher address than the
+		 * current frame.
+		 */
+		low = fp + 8;
+		fp = frame->fp;
+	}
+}

arch/avr32/kernel/traps.c

@@ -39,7 +39,7 @@ void NORET_TYPE die(const char *str, struct pt_regs *regs, long err)
 	printk("FRAME_POINTER ");
 #endif
 	if (current_cpu_data.features & AVR32_FEATURE_OCD) {
-		unsigned long did = __mfdr(DBGREG_DID);
+		unsigned long did = ocd_read(DID);
 		printk("chip: 0x%03lx:0x%04lx rev %lu\n",
 		       (did >> 1) & 0x7ff,
 		       (did >> 12) & 0x7fff,

arch/avr32/kernel/vmlinux.lds.S

@@ -77,10 +77,10 @@ SECTIONS
 		. = 0x100;
 		*(.scall.text)
 		*(.irq.text)
+		KPROBES_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
-		KPROBES_TEXT
 		*(.fixup)
 		*(.gnu.warning)
 		_etext = .;

arch/avr32/mm/cache.c

@@ -122,16 +122,6 @@ void flush_icache_page(struct vm_area_struct *vma, struct page *page)
 	}
 }
 
-/*
- * This one is used by copy_to_user_page()
- */
-void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
-			     unsigned long addr, int len)
-{
-	if (vma->vm_flags & VM_EXEC)
-		flush_icache_range(addr, addr + len);
-}
-
 asmlinkage int sys_cacheflush(int operation, void __user *addr, size_t len)
 {
 	int ret;
@@ -159,3 +149,13 @@ asmlinkage int sys_cacheflush(int operation, void __user *addr, size_t len)
 out:
 	return ret;
 }
+
+void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+		unsigned long vaddr, void *dst, const void *src,
+		unsigned long len)
+{
+	memcpy(dst, src, len);
+	if (vma->vm_flags & VM_EXEC)
+		flush_icache_range((unsigned long)dst,
+				(unsigned long)dst + len);
+}

include/asm-avr32/cacheflush.h

@@ -116,15 +116,16 @@ extern void flush_icache_page(struct vm_area_struct *vma, struct page *page);
  * flush with all configurations.
  */
 extern void flush_icache_range(unsigned long start, unsigned long end);
-extern void flush_icache_user_range(struct vm_area_struct *vma,
-				    struct page *page,
-				    unsigned long addr, int len);
 
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) do {	\
-	memcpy(dst, src, len);					\
-	flush_icache_user_range(vma, page, vaddr, len);		\
-} while(0)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len)	\
-	memcpy(dst, src, len)
+extern void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+		unsigned long vaddr, void *dst, const void *src,
+		unsigned long len);
+
+static inline void copy_from_user_page(struct vm_area_struct *vma,
+		struct page *page, unsigned long vaddr, void *dst,
+		const void *src, unsigned long len)
+{
+	memcpy(dst, src, len);
+}
 
 #endif /* __ASM_AVR32_CACHEFLUSH_H */

include/asm-avr32/processor.h

@@ -139,6 +139,9 @@ extern void show_regs_log_lvl(struct pt_regs *regs, const char *log_lvl);
 extern void show_stack_log_lvl(struct task_struct *tsk, unsigned long sp,
 			       struct pt_regs *regs, const char *log_lvl);
 
+#define task_pt_regs(p) \
+	((struct pt_regs *)(THREAD_SIZE + task_stack_page(p)) - 1)
+
 #define KSTK_EIP(tsk)	((tsk)->thread.cpu_context.pc)
 #define KSTK_ESP(tsk)	((tsk)->thread.cpu_context.ksp)
 

include/asm-avr32/ptrace.h

@@ -14,8 +14,7 @@
 /*
  * Status Register bits
  */
-#define SR_H		0x40000000
-#define SR_R		0x20000000
+#define SR_H		0x20000000
 #define SR_J		0x10000000
 #define SR_DM		0x08000000
 #define SR_D		0x04000000
@@ -35,8 +34,7 @@
 #define SR_I0M		0x00020000
 #define SR_GM		0x00010000
 
-#define SR_H_BIT	30
-#define SR_R_BIT	29
+#define SR_H_BIT	29
 #define SR_J_BIT	28
 #define SR_DM_BIT	27
 #define SR_D_BIT	26

include/asm-avr32/sysreg.h

@@ -93,6 +93,8 @@
 #define SYSREG_I3M_SIZE				1
 #define SYSREG_EM_OFFSET			21
 #define SYSREG_EM_SIZE				1
+#define SYSREG_MODE_OFFSET			22
+#define SYSREG_MODE_SIZE			3
 #define SYSREG_M0_OFFSET			22
 #define SYSREG_M0_SIZE				1
 #define SYSREG_M1_OFFSET			23

include/asm-avr32/system.h

@@ -35,8 +35,8 @@
 #include <asm/ocd.h>
 #define finish_arch_switch(prev)			\
 	do {						\
-		__mtdr(DBGREG_PID, prev->pid);		\
-		__mtdr(DBGREG_PID, current->pid);	\
+		ocd_write(PID, prev->pid);		\
+		ocd_write(PID, current->pid);		\
 	} while(0)
 #endif
 

include/asm-avr32/thread_info.h

@@ -25,6 +25,11 @@ struct thread_info {
 	unsigned long		flags;		/* low level flags */
 	__u32			cpu;
 	__s32			preempt_count;	/* 0 => preemptable, <0 => BUG */
+	__u32			rar_saved;	/* return address... */
+	__u32			rsr_saved;	/* ...and status register
+						   saved by debug handler
+						   when setting up
+						   trampoline */
 	struct restart_block	restart_block;
 	__u8			supervisor_stack[0];
 };
@@ -78,8 +83,8 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_NEED_RESCHED        2       /* rescheduling necessary */
 #define TIF_POLLING_NRFLAG      3       /* true if poll_idle() is polling
 					   TIF_NEED_RESCHED */
-#define TIF_BREAKPOINT		4	/* true if we should break after return */
-#define TIF_SINGLE_STEP		5	/* single step after next break */
+#define TIF_BREAKPOINT		4	/* enter monitor mode on return */
+#define TIF_SINGLE_STEP		5	/* single step in progress */
 #define TIF_MEMDIE		6
 #define TIF_RESTORE_SIGMASK	7	/* restore signal mask in do_signal */
 #define TIF_CPU_GOING_TO_SLEEP	8	/* CPU is entering sleep 0 mode */
@@ -89,18 +94,24 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
-#define _TIF_BREAKPOINT		(1 << TIF_BREAKPOINT)
 #define _TIF_SINGLE_STEP	(1 << TIF_SINGLE_STEP)
 #define _TIF_MEMDIE		(1 << TIF_MEMDIE)
 #define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
 #define _TIF_CPU_GOING_TO_SLEEP (1 << TIF_CPU_GOING_TO_SLEEP)
 
-/* XXX: These two masks must never span more than 16 bits! */
+/* Note: The masks below must never span more than 16 bits! */
+
 /* work to do on interrupt/exception return */
-#define _TIF_WORK_MASK		0x0000013e
+#define _TIF_WORK_MASK				\
+	((1 << TIF_SIGPENDING)			\
+	 | (1 << TIF_NEED_RESCHED)		\
+	 | (1 << TIF_POLLING_NRFLAG)		\
+	 | (1 << TIF_BREAKPOINT)		\
+	 | (1 << TIF_RESTORE_SIGMASK))
+
 /* work to do on any return to userspace */
-#define _TIF_ALLWORK_MASK	0x0000013f
+#define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK | (1 << TIF_SYSCALL_TRACE))
 /* work to do on return from debug mode */
-#define _TIF_DBGWORK_MASK	0x0000017e
+#define _TIF_DBGWORK_MASK	(_TIF_WORK_MASK & ~(1 << TIF_BREAKPOINT))
 
 #endif /* __ASM_AVR32_THREAD_INFO_H */