Commit e19ecbf1 authored by Marek Vasut's avatar Marek Vasut Committed by Mark Brown

ASoC: sgtl5000: Fix VDDA and VDDIO comparison

Comparing the voltage of VDDA and VDDIO to determine whether or not to
enable VDDC manual override is insufficient. This is a problem in case
the VDDA is supplied from different regulator than VDDIO, while both
report the same voltage to the regulator framework. In that case where
VDDA and VDDIO is supplied by different regulators, the VDDC manual
override must not be applied.

Fixes: b6319b06 ("ASoC: sgtl5000: Fix charge pump source assignment")
Signed-off-by: default avatarMarek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Link: https://lore.kernel.org/r/20191220164450.1395038-2-marex@denx.deSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent aa6dcba8
......@@ -1344,7 +1344,8 @@ static int sgtl5000_set_power_regs(struct snd_soc_component *component)
* if vddio == vdda the source of charge pump should be
* assigned manually to VDDIO
*/
if (vddio == vdda) {
if (regulator_is_equal(sgtl5000->supplies[VDDA].consumer,
sgtl5000->supplies[VDDIO].consumer)) {
lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
SGTL5000_VDDC_MAN_ASSN_SHIFT;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment