Commit e1b7a72a authored by Russell King's avatar Russell King

FB: sa1100: move platform data to platform files

Move platform data out of the sa1100fb driver into the various
platform files themselves.
Acked-by: default avatarFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 9e6720fb
...@@ -20,6 +20,8 @@ ...@@ -20,6 +20,8 @@
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/mm.h> #include <linux/mm.h>
#include <video/sa1100fb.h>
#include <mach/hardware.h> #include <mach/hardware.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <asm/irq.h> #include <asm/irq.h>
...@@ -204,6 +206,39 @@ static struct mcp_plat_data assabet_mcp_data = { ...@@ -204,6 +206,39 @@ static struct mcp_plat_data assabet_mcp_data = {
.sclk_rate = 11981000, .sclk_rate = 11981000,
}; };
#ifndef ASSABET_PAL_VIDEO
/*
* The assabet uses a sharp LQ039Q2DS54 LCD module. It is actually
* takes an RGB666 signal, but we provide it with an RGB565 signal
* instead (def_rgb_16).
*/
static struct sa1100fb_mach_info lq039q2ds54_info = {
.pixclock = 171521, .bpp = 16,
.xres = 320, .yres = 240,
.hsync_len = 5, .vsync_len = 1,
.left_margin = 61, .upper_margin = 3,
.right_margin = 9, .lower_margin = 0,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
.lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
};
#else
static struct sa1100fb_mach_info pal_info = {
.pixclock = 67797, .bpp = 16,
.xres = 640, .yres = 512,
.hsync_len = 64, .vsync_len = 6,
.left_margin = 125, .upper_margin = 70,
.right_margin = 115, .lower_margin = 36,
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
.lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
};
#endif
static void __init assabet_init(void) static void __init assabet_init(void)
{ {
/* /*
...@@ -249,6 +284,11 @@ static void __init assabet_init(void) ...@@ -249,6 +284,11 @@ static void __init assabet_init(void)
#endif #endif
} }
#ifndef ASSABET_PAL_VIDEO
sa11x0_register_lcd(&lq039q2ds54_info);
#else
sa11x0_register_lcd(&pal_video);
#endif
sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources, sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources,
ARRAY_SIZE(assabet_flash_resources)); ARRAY_SIZE(assabet_flash_resources));
sa11x0_register_irda(&assabet_irda_data); sa11x0_register_irda(&assabet_irda_data);
......
...@@ -28,6 +28,8 @@ ...@@ -28,6 +28,8 @@
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/pda_power.h> #include <linux/pda_power.h>
#include <video/sa1100fb.h>
#include <mach/hardware.h> #include <mach/hardware.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <asm/irq.h> #include <asm/irq.h>
...@@ -310,6 +312,20 @@ static struct resource collie_flash_resources[] = { ...@@ -310,6 +312,20 @@ static struct resource collie_flash_resources[] = {
} }
}; };
static struct sa1100fb_mach_info collie_lcd_info = {
.pixclock = 171521, .bpp = 16,
.xres = 320, .yres = 240,
.hsync_len = 5, .vsync_len = 1,
.left_margin = 11, .upper_margin = 2,
.right_margin = 30, .lower_margin = 0,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
.lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
};
static void __init collie_init(void) static void __init collie_init(void)
{ {
int ret = 0; int ret = 0;
...@@ -348,6 +364,7 @@ static void __init collie_init(void) ...@@ -348,6 +364,7 @@ static void __init collie_init(void)
printk(KERN_WARNING "collie: Unable to register LoCoMo device\n"); printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
} }
sa11x0_register_lcd(&collie_lcd_info);
sa11x0_register_mtd(&collie_flash_data, collie_flash_resources, sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
ARRAY_SIZE(collie_flash_resources)); ARRAY_SIZE(collie_flash_resources));
sa11x0_register_mcp(&collie_mcp_data); sa11x0_register_mcp(&collie_mcp_data);
......
...@@ -19,6 +19,8 @@ ...@@ -19,6 +19,8 @@
#include <linux/ioport.h> #include <linux/ioport.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <video/sa1100fb.h>
#include <asm/div64.h> #include <asm/div64.h>
#include <mach/hardware.h> #include <mach/hardware.h>
#include <asm/system.h> #include <asm/system.h>
...@@ -294,6 +296,11 @@ static struct platform_device sa11x0fb_device = { ...@@ -294,6 +296,11 @@ static struct platform_device sa11x0fb_device = {
.resource = sa11x0fb_resources, .resource = sa11x0fb_resources,
}; };
void sa11x0_register_lcd(struct sa1100fb_mach_info *inf)
{
sa11x0_register_device(&sa11x0fb_device, inf);
}
static struct platform_device sa11x0pcmcia_device = { static struct platform_device sa11x0pcmcia_device = {
.name = "sa11x0-pcmcia", .name = "sa11x0-pcmcia",
.id = -1, .id = -1,
...@@ -356,7 +363,6 @@ static struct platform_device *sa11x0_devices[] __initdata = { ...@@ -356,7 +363,6 @@ static struct platform_device *sa11x0_devices[] __initdata = {
&sa11x0uart3_device, &sa11x0uart3_device,
&sa11x0ssp_device, &sa11x0ssp_device,
&sa11x0pcmcia_device, &sa11x0pcmcia_device,
&sa11x0fb_device,
&sa11x0rtc_device, &sa11x0rtc_device,
}; };
......
...@@ -40,3 +40,6 @@ void sa11x0_register_irda(struct irda_platform_data *irda); ...@@ -40,3 +40,6 @@ void sa11x0_register_irda(struct irda_platform_data *irda);
struct mcp_plat_data; struct mcp_plat_data;
void sa11x0_register_mcp(struct mcp_plat_data *data); void sa11x0_register_mcp(struct mcp_plat_data *data);
struct sa1100fb_mach_info;
void sa11x0_register_lcd(struct sa1100fb_mach_info *inf);
...@@ -14,6 +14,8 @@ ...@@ -14,6 +14,8 @@
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/gpio.h> #include <linux/gpio.h>
#include <video/sa1100fb.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
#include <asm/mach/irda.h> #include <asm/mach/irda.h>
...@@ -36,13 +38,26 @@ static void h3100_lcd_power(int enable) ...@@ -36,13 +38,26 @@ static void h3100_lcd_power(int enable)
} }
} }
static struct sa1100fb_mach_info h3100_lcd_info = {
.pixclock = 406977, .bpp = 4,
.xres = 320, .yres = 240,
.hsync_len = 26, .vsync_len = 41,
.left_margin = 4, .upper_margin = 0,
.right_margin = 4, .lower_margin = 0,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.cmap_greyscale = 1,
.cmap_inverse = 1,
.lccr0 = LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas,
.lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
};
static void __init h3100_map_io(void) static void __init h3100_map_io(void)
{ {
h3xxx_map_io(); h3xxx_map_io();
sa1100fb_lcd_power = h3100_lcd_power;
/* Older bootldrs put GPIO2-9 in alternate mode on the /* Older bootldrs put GPIO2-9 in alternate mode on the
assumption that they are used for video */ assumption that they are used for video */
GAFR &= ~0x000001fb; GAFR &= ~0x000001fb;
...@@ -80,6 +95,9 @@ static void __init h3100_mach_init(void) ...@@ -80,6 +95,9 @@ static void __init h3100_mach_init(void)
{ {
h3xxx_init_gpio(h3100_default_gpio, ARRAY_SIZE(h3100_default_gpio)); h3xxx_init_gpio(h3100_default_gpio, ARRAY_SIZE(h3100_default_gpio));
h3xxx_mach_init(); h3xxx_mach_init();
sa1100fb_lcd_power = h3100_lcd_power;
sa11x0_register_lcd(&h3100_lcd_info);
sa11x0_register_irda(&h3100_irda_data); sa11x0_register_irda(&h3100_irda_data);
} }
......
...@@ -14,6 +14,8 @@ ...@@ -14,6 +14,8 @@
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/gpio.h> #include <linux/gpio.h>
#include <video/sa1100fb.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
#include <asm/mach/irda.h> #include <asm/mach/irda.h>
...@@ -56,11 +58,33 @@ err2: gpio_free(H3XXX_EGPIO_LCD_ON); ...@@ -56,11 +58,33 @@ err2: gpio_free(H3XXX_EGPIO_LCD_ON);
err1: return; err1: return;
} }
static const struct sa1100fb_rgb h3600_rgb_16 = {
.red = { .offset = 12, .length = 4, },
.green = { .offset = 7, .length = 4, },
.blue = { .offset = 1, .length = 4, },
.transp = { .offset = 0, .length = 0, },
};
static struct sa1100fb_mach_info h3600_lcd_info = {
.pixclock = 174757, .bpp = 16,
.xres = 320, .yres = 240,
.hsync_len = 3, .vsync_len = 3,
.left_margin = 12, .upper_margin = 10,
.right_margin = 17, .lower_margin = 1,
.cmap_static = 1,
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
.lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
.rgb[RGB_16] = &h3600_rgb_16,
};
static void __init h3600_map_io(void) static void __init h3600_map_io(void)
{ {
h3xxx_map_io(); h3xxx_map_io();
sa1100fb_lcd_power = h3600_lcd_power;
} }
/* /*
...@@ -121,6 +145,9 @@ static void __init h3600_mach_init(void) ...@@ -121,6 +145,9 @@ static void __init h3600_mach_init(void)
{ {
h3xxx_init_gpio(h3600_default_gpio, ARRAY_SIZE(h3600_default_gpio)); h3xxx_init_gpio(h3600_default_gpio, ARRAY_SIZE(h3600_default_gpio));
h3xxx_mach_init(); h3xxx_mach_init();
sa1100fb_lcd_power = h3600_lcd_power;
sa11x0_register_lcd(&h3600_lcd_info);
sa11x0_register_irda(&h3600_irda_data); sa11x0_register_irda(&h3600_irda_data);
} }
......
...@@ -6,6 +6,8 @@ ...@@ -6,6 +6,8 @@
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/tty.h> #include <linux/tty.h>
#include <video/sa1100fb.h>
#include <mach/hardware.h> #include <mach/hardware.h>
#include <asm/setup.h> #include <asm/setup.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
...@@ -26,8 +28,85 @@ static struct mcp_plat_data lart_mcp_data = { ...@@ -26,8 +28,85 @@ static struct mcp_plat_data lart_mcp_data = {
.sclk_rate = 11981000, .sclk_rate = 11981000,
}; };
#ifdef LART_GREY_LCD
static struct sa1100fb_mach_info lart_grey_info = {
.pixclock = 150000, .bpp = 4,
.xres = 320, .yres = 240,
.hsync_len = 1, .vsync_len = 1,
.left_margin = 4, .upper_margin = 0,
.right_margin = 2, .lower_margin = 0,
.cmap_greyscale = 1,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.lccr0 = LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono,
.lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
};
#endif
#ifdef LART_COLOR_LCD
static struct sa1100fb_mach_info lart_color_info = {
.pixclock = 150000, .bpp = 16,
.xres = 320, .yres = 240,
.hsync_len = 2, .vsync_len = 3,
.left_margin = 69, .upper_margin = 14,
.right_margin = 8, .lower_margin = 4,
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
.lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
};
#endif
#ifdef LART_VIDEO_OUT
static struct sa1100fb_mach_info lart_video_info = {
.pixclock = 39721, .bpp = 16,
.xres = 640, .yres = 480,
.hsync_len = 95, .vsync_len = 2,
.left_margin = 40, .upper_margin = 32,
.right_margin = 24, .lower_margin = 11,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
.lccr3 = LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
};
#endif
#ifdef LART_KIT01_LCD
static struct sa1100fb_mach_info lart_kit01_info = {
.pixclock = 63291, .bpp = 16,
.xres = 640, .yres = 480,
.hsync_len = 64, .vsync_len = 3,
.left_margin = 122, .upper_margin = 45,
.right_margin = 10, .lower_margin = 10,
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
.lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg
};
#endif
static void __init lart_init(void) static void __init lart_init(void)
{ {
struct sa1100fb_mach_info *inf = NULL;
#ifdef LART_GREY_LCD
inf = &lart_grey_info;
#endif
#ifdef LART_COLOR_LCD
inf = &lart_color_info;
#endif
#ifdef LART_VIDEO_OUT
inf = &lart_video_info;
#endif
#ifdef LART_KIT01_LCD
inf = &lart_kit01_info;
#endif
if (inf)
sa11x0_register_lcd(inf);
sa11x0_register_mcp(&lart_mcp_data); sa11x0_register_mcp(&lart_mcp_data);
} }
......
...@@ -9,6 +9,8 @@ ...@@ -9,6 +9,8 @@
#include <linux/mtd/mtd.h> #include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h> #include <linux/mtd/partitions.h>
#include <video/sa1100fb.h>
#include <mach/hardware.h> #include <mach/hardware.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <asm/setup.h> #include <asm/setup.h>
...@@ -57,8 +59,23 @@ static struct mcp_plat_data shannon_mcp_data = { ...@@ -57,8 +59,23 @@ static struct mcp_plat_data shannon_mcp_data = {
.sclk_rate = 11981000, .sclk_rate = 11981000,
}; };
static struct sa1100fb_mach_info shannon_lcd_info = {
.pixclock = 152500, .bpp = 8,
.xres = 640, .yres = 480,
.hsync_len = 4, .vsync_len = 3,
.left_margin = 2, .upper_margin = 0,
.right_margin = 1, .lower_margin = 0,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.lccr0 = LCCR0_Color | LCCR0_Dual | LCCR0_Pas,
.lccr3 = LCCR3_ACBsDiv(512),
};
static void __init shannon_init(void) static void __init shannon_init(void)
{ {
sa11x0_register_lcd(&shannon_lcd_info);
sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1); sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
sa11x0_register_mcp(&shannon_mcp_data); sa11x0_register_mcp(&shannon_mcp_data);
} }
......
...@@ -218,235 +218,7 @@ static const struct sa1100fb_rgb def_rgb_16 = { ...@@ -218,235 +218,7 @@ static const struct sa1100fb_rgb def_rgb_16 = {
.transp = { .offset = 0, .length = 0, }, .transp = { .offset = 0, .length = 0, },
}; };
#ifdef CONFIG_SA1100_ASSABET
#ifndef ASSABET_PAL_VIDEO
/*
* The assabet uses a sharp LQ039Q2DS54 LCD module. It is actually
* takes an RGB666 signal, but we provide it with an RGB565 signal
* instead (def_rgb_16).
*/
static struct sa1100fb_mach_info lq039q2ds54_info __devinitdata = {
.pixclock = 171521, .bpp = 16,
.xres = 320, .yres = 240,
.hsync_len = 5, .vsync_len = 1,
.left_margin = 61, .upper_margin = 3,
.right_margin = 9, .lower_margin = 0,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
.lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
};
#else
static struct sa1100fb_mach_info pal_info __devinitdata = {
.pixclock = 67797, .bpp = 16,
.xres = 640, .yres = 512,
.hsync_len = 64, .vsync_len = 6,
.left_margin = 125, .upper_margin = 70,
.right_margin = 115, .lower_margin = 36,
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
.lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
};
#endif
#endif
#ifdef CONFIG_SA1100_H3600
static const struct sa1100fb_rgb h3600_rgb_16 = {
.red = { .offset = 12, .length = 4, },
.green = { .offset = 7, .length = 4, },
.blue = { .offset = 1, .length = 4, },
.transp = { .offset = 0, .length = 0, },
};
static struct sa1100fb_mach_info h3600_info __devinitdata = {
.pixclock = 174757, .bpp = 16,
.xres = 320, .yres = 240,
.hsync_len = 3, .vsync_len = 3,
.left_margin = 12, .upper_margin = 10,
.right_margin = 17, .lower_margin = 1,
.cmap_static = 1,
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
.lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
.rgb[RGB_16] = &h3600_rgb_16,
};
#endif
#ifdef CONFIG_SA1100_H3100
static struct sa1100fb_mach_info h3100_info __devinitdata = {
.pixclock = 406977, .bpp = 4,
.xres = 320, .yres = 240,
.hsync_len = 26, .vsync_len = 41,
.left_margin = 4, .upper_margin = 0,
.right_margin = 4, .lower_margin = 0,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.cmap_greyscale = 1,
.cmap_inverse = 1,
.lccr0 = LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas,
.lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
};
#endif
#ifdef CONFIG_SA1100_COLLIE
static struct sa1100fb_mach_info collie_info __devinitdata = {
.pixclock = 171521, .bpp = 16,
.xres = 320, .yres = 240,
.hsync_len = 5, .vsync_len = 1,
.left_margin = 11, .upper_margin = 2,
.right_margin = 30, .lower_margin = 0,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
.lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
};
#endif
#ifdef LART_GREY_LCD
static struct sa1100fb_mach_info lart_grey_info __devinitdata = {
.pixclock = 150000, .bpp = 4,
.xres = 320, .yres = 240,
.hsync_len = 1, .vsync_len = 1,
.left_margin = 4, .upper_margin = 0,
.right_margin = 2, .lower_margin = 0,
.cmap_greyscale = 1,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.lccr0 = LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono,
.lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
};
#endif
#ifdef LART_COLOR_LCD
static struct sa1100fb_mach_info lart_color_info __devinitdata = {
.pixclock = 150000, .bpp = 16,
.xres = 320, .yres = 240,
.hsync_len = 2, .vsync_len = 3,
.left_margin = 69, .upper_margin = 14,
.right_margin = 8, .lower_margin = 4,
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
.lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
};
#endif
#ifdef LART_VIDEO_OUT
static struct sa1100fb_mach_info lart_video_info __devinitdata = {
.pixclock = 39721, .bpp = 16,
.xres = 640, .yres = 480,
.hsync_len = 95, .vsync_len = 2,
.left_margin = 40, .upper_margin = 32,
.right_margin = 24, .lower_margin = 11,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
.lccr3 = LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
};
#endif
#ifdef LART_KIT01_LCD
static struct sa1100fb_mach_info lart_kit01_info __devinitdata = {
.pixclock = 63291, .bpp = 16,
.xres = 640, .yres = 480,
.hsync_len = 64, .vsync_len = 3,
.left_margin = 122, .upper_margin = 45,
.right_margin = 10, .lower_margin = 10,
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
.lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg
};
#endif
#ifdef CONFIG_SA1100_SHANNON
static struct sa1100fb_mach_info shannon_info __devinitdata = {
.pixclock = 152500, .bpp = 8,
.xres = 640, .yres = 480,
.hsync_len = 4, .vsync_len = 3,
.left_margin = 2, .upper_margin = 0,
.right_margin = 1, .lower_margin = 0,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.lccr0 = LCCR0_Color | LCCR0_Dual | LCCR0_Pas,
.lccr3 = LCCR3_ACBsDiv(512),
};
#endif
static struct sa1100fb_mach_info * __devinit
sa1100fb_get_machine_info(struct sa1100fb_info *fbi)
{
struct sa1100fb_mach_info *inf = NULL;
/*
* R G B T
* default {11,5}, { 5,6}, { 0,5}, { 0,0}
* h3600 {12,4}, { 7,4}, { 1,4}, { 0,0}
* freebird { 8,4}, { 4,4}, { 0,4}, {12,4}
*/
#ifdef CONFIG_SA1100_ASSABET
if (machine_is_assabet()) {
#ifndef ASSABET_PAL_VIDEO
inf = &lq039q2ds54_info;
#else
inf = &pal_info;
#endif
}
#endif
#ifdef CONFIG_SA1100_H3100
if (machine_is_h3100()) {
inf = &h3100_info;
}
#endif
#ifdef CONFIG_SA1100_H3600
if (machine_is_h3600()) {
inf = &h3600_info;
}
#endif
#ifdef CONFIG_SA1100_COLLIE
if (machine_is_collie()) {
inf = &collie_info;
}
#endif
#ifdef CONFIG_SA1100_LART
if (machine_is_lart()) {
#ifdef LART_GREY_LCD
inf = &lart_grey_info;
#endif
#ifdef LART_COLOR_LCD
inf = &lart_color_info;
#endif
#ifdef LART_VIDEO_OUT
inf = &lart_video_info;
#endif
#ifdef LART_KIT01_LCD
inf = &lart_kit01_info;
#endif
}
#endif
#ifdef CONFIG_SA1100_SHANNON
if (machine_is_shannon()) {
inf = &shannon_info;
}
#endif
return inf;
}
static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_info *); static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_info *);
static void set_ctrlr_state(struct sa1100fb_info *fbi, u_int state); static void set_ctrlr_state(struct sa1100fb_info *fbi, u_int state);
...@@ -1353,7 +1125,7 @@ static struct fb_monspecs monspecs __devinitdata = { ...@@ -1353,7 +1125,7 @@ static struct fb_monspecs monspecs __devinitdata = {
static struct sa1100fb_info * __devinit sa1100fb_init_fbinfo(struct device *dev) static struct sa1100fb_info * __devinit sa1100fb_init_fbinfo(struct device *dev)
{ {
struct sa1100fb_mach_info *inf; struct sa1100fb_mach_info *inf = dev->platform_data;
struct sa1100fb_info *fbi; struct sa1100fb_info *fbi;
unsigned i; unsigned i;
...@@ -1390,10 +1162,6 @@ static struct sa1100fb_info * __devinit sa1100fb_init_fbinfo(struct device *dev) ...@@ -1390,10 +1162,6 @@ static struct sa1100fb_info * __devinit sa1100fb_init_fbinfo(struct device *dev)
fbi->rgb[RGB_8] = &rgb_8; fbi->rgb[RGB_8] = &rgb_8;
fbi->rgb[RGB_16] = &def_rgb_16; fbi->rgb[RGB_16] = &def_rgb_16;
inf = dev->platform_data;
if (!inf)
inf = sa1100fb_get_machine_info(fbi);
/* /*
* People just don't seem to get this. We don't support * People just don't seem to get this. We don't support
* anything but correct entries now, so panic if someone * anything but correct entries now, so panic if someone
...@@ -1447,6 +1215,11 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev) ...@@ -1447,6 +1215,11 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
struct sa1100fb_info *fbi; struct sa1100fb_info *fbi;
int ret, irq; int ret, irq;
if (!pdev->dev.platform_data) {
dev_err(&pdev->dev, "no platform LCD data\n");
return -EINVAL;
}
irq = platform_get_irq(pdev, 0); irq = platform_get_irq(pdev, 0);
if (irq < 0) if (irq < 0)
return -EINVAL; return -EINVAL;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment