spi: dw: fix potential variable assignment error

spi::mode is defined by framework for several SPI capabilities,
such as polarity, phase, bit-endian, wire number. Directly use this
variable for setting controller's polarity and phase causes other
bit in register being set. Since SPI framework has its definition,
SPI_CPOL and SPI_CPHA offset may be changed by framwork change.
Instead of just mask off the relevant bits,
fetch required bit in spi::mode and set to register.
Signed-off-by: shaftarger <shol@livemail.tw>
Signed-off-by: Mark Brown <broonie@kernel.org>

drivers/spi/spi-dw.c

@@ -317,7 +317,8 @@ static int dw_spi_transfer_one(struct spi_controller *master,
 	/* Default SPI mode is SCPOL = 0, SCPH = 0 */
 	cr0 = (transfer->bits_per_word - 1)
 		| (chip->type << SPI_FRF_OFFSET)
-		| (spi->mode << SPI_MODE_OFFSET)
+		| ((((spi->mode & SPI_CPOL) ? 1 : 0) << SPI_SCOL_OFFSET) |
+			(((spi->mode & SPI_CPHA) ? 1 : 0) << SPI_SCPH_OFFSET))
 		| (chip->tmode << SPI_TMOD_OFFSET);
 
 	/*