ARM: dts: imx: Remove #address/#size-cells from switch nodes

Remove unnecessary #address-cells/#size-cells from the switch nodes
to fix the following DTC warnings:

arch/arm/boot/dts/imx6q-b450v3.dtb: Warning (avoid_unnecessary_addr_size): /mdio-gpio/switch@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx51-zii-rdu1.dts

@@ -207,8 +207,6 @@ mdio_gpio: mdio-gpio {
 
 		switch@0 {
 			compatible = "marvell,mv88e6085";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0>;
 			dsa,member = <0 0>;
 

arch/arm/boot/dts/imx6q-bx50v3.dtsi

@@ -107,8 +107,6 @@ mdio0: mdio-gpio {
 
 		switch@0 {
 			compatible = "marvell,mv88e6085"; /* 88e6240*/
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0>;
 
 			switch_ports: ports {

arch/arm/boot/dts/imx6qdl-gw5904.dtsi

@@ -162,8 +162,6 @@ mdio {
 
 		switch@0 {
 			compatible = "marvell,mv88e6085";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0>;
 
 			ports {

arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi

@@ -688,8 +688,6 @@ switch: switch@0 {
 			compatible = "marvell,mv88e6085";
 			pinctrl-0 = <&pinctrl_switch_irq>;
 			pinctrl-names = "default";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0>;
 			dsa,member = <0 0>;
 			eeprom-length = <512>;

arch/arm/boot/dts/vf610-zii-dev-rev-b.dts

@@ -70,8 +70,6 @@ switch0: switch@0 {
 				compatible = "marvell,mv88e6085";
 				pinctrl-0 = <&pinctrl_gpio_switch0>;
 				pinctrl-names = "default";
-				#address-cells = <1>;
-				#size-cells = <0>;
 				reg = <0>;
 				dsa,member = <0 0>;
 				interrupt-parent = <&gpio0>;
@@ -156,8 +154,6 @@ switch1: switch@0 {
 				compatible = "marvell,mv88e6085";
 				pinctrl-0 = <&pinctrl_gpio_switch1>;
 				pinctrl-names = "default";
-				#address-cells = <1>;
-				#size-cells = <0>;
 				reg = <0>;
 				dsa,member = <0 1>;
 				interrupt-parent = <&gpio0>;
@@ -243,8 +239,6 @@ mdio_mux_4: mdio@4 {
 
 			switch2: switch@0 {
 				compatible = "marvell,mv88e6085";
-				#address-cells = <1>;
-				#size-cells = <0>;
 				reg = <0>;
 				dsa,member = <0 2>;
 

arch/arm/boot/dts/vf610-zii-dev-rev-c.dts

@@ -69,8 +69,6 @@ switch0: switch@0 {
 				compatible = "marvell,mv88e6190";
 				pinctrl-0 = <&pinctrl_gpio_switch0>;
 				pinctrl-names = "default";
-				#address-cells = <1>;
-				#size-cells = <0>;
 				reg = <0>;
 				dsa,member = <0 0>;
 				eeprom-length = <65536>;
@@ -166,8 +164,6 @@ switch1: switch@0 {
 				compatible = "marvell,mv88e6190";
 				pinctrl-0 = <&pinctrl_gpio_switch1>;
 				pinctrl-names = "default";
-				#address-cells = <1>;
-				#size-cells = <0>;
 				reg = <0>;
 				dsa,member = <0 1>;
 				eeprom-length = <65536>;