ARM: dts: rk3288: add arm,cpu-registers-not-fw-configured

This will enable use of physical arch timers on rk3288, where each
core comes out of reset with a different virtual offset.  Using
physical timers will help with SMP booting on coreboot and older
u-boot and should also allow suspend-resume and cpu-hotplug to work on
all firmwares.

Firmware which does initialize the cpu registers properly at boot and
cpu-hotplug can remove this property from the device tree.
Signed-off-by: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/rk3288.dtsi

@@ -141,6 +141,7 @@ xin24m: oscillator {
 
 	timer {
 		compatible = "arm,armv7-timer";
+		arm,cpu-registers-not-fw-configured;
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,