Commit e37f50e1 authored by Martin Schwidefsky's avatar Martin Schwidefsky

[S390] Add processor type march=z10 and a processor type safety check.

This patch adds the code generation option for IBM System z10 and
adds a check in head[31,64].S to prevents the execution of a kernel
compiled for a new processor type on an old machine.
Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
parent b3b59d33
......@@ -230,6 +230,14 @@ config MARCH_Z9_109
Class (z9 BC). The kernel will be slightly faster but will not
work on older machines such as the z990, z890, z900, and z800.
config MARCH_Z10
bool "IBM System z10"
help
Select this to enable optimizations for IBM System z10. The
kernel will be slightly faster but will not work on older
machines such as the z990, z890, z900, z800, z9-109, z9-ec
and z9-bc.
endchoice
config PACK_STACK
......
......@@ -34,6 +34,7 @@ cflags-$(CONFIG_MARCH_G5) += $(call cc-option,-march=g5)
cflags-$(CONFIG_MARCH_Z900) += $(call cc-option,-march=z900)
cflags-$(CONFIG_MARCH_Z990) += $(call cc-option,-march=z990)
cflags-$(CONFIG_MARCH_Z9_109) += $(call cc-option,-march=z9-109)
cflags-$(CONFIG_MARCH_Z10) += $(call cc-option,-march=z10)
#KBUILD_IMAGE is necessary for make rpm
KBUILD_IMAGE :=arch/s390/boot/image
......
......@@ -461,6 +461,55 @@ start:
.byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7
.byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff
#
# startup-code at 0x10000, running in absolute addressing mode
# this is called either by the ipl loader or directly by PSW restart
# or linload or SALIPL
#
.org 0x10000
startup:basr %r13,0 # get base
.LPG0:
#ifndef CONFIG_MARCH_G5
# check processor version against MARCH_{G5,Z900,Z990,Z9_109,Z10}
stidp __LC_CPUID # store cpuid
lhi %r0,(3f-2f) / 2
la %r1,2f-.LPG0(%r13)
0: clc __LC_CPUID+4(2),0(%r1)
jne 3f
lpsw 1f-.LPG0(13) # machine type not good enough, crash
.align 16
1: .long 0x000a0000,0x00000000
2:
#if defined(CONFIG_MARCH_Z10)
.short 0x9672, 0x2064, 0x2066, 0x2084, 0x2086, 0x2094, 0x2096
#elif defined(CONFIG_MARCH_Z9_109)
.short 0x9672, 0x2064, 0x2066, 0x2084, 0x2086
#elif defined(CONFIG_MARCH_Z990)
.short 0x9672, 0x2064, 0x2066
#elif defined(CONFIG_MARCH_Z900)
.short 0x9672
#endif
3: la %r1,2(%r1)
brct %r0,0b
#endif
l %r13,0f-.LPG0(%r13)
b 0(%r13)
0: .long startup_continue
#
# params at 10400 (setup.h)
#
.org PARMAREA
.long 0,0 # IPL_DEVICE
.long 0,0 # INITRD_START
.long 0,0 # INITRD_SIZE
.org COMMAND_LINE
.byte "root=/dev/ram0 ro"
.byte 0
#ifdef CONFIG_64BIT
#include "head64.S"
#else
......
......@@ -10,34 +10,13 @@
*
*/
#
# startup-code at 0x10000, running in absolute addressing mode
# this is called either by the ipl loader or directly by PSW restart
# or linload or SALIPL
#
.org 0x10000
startup:basr %r13,0 # get base
.LPG0: l %r13,0f-.LPG0(%r13)
b 0(%r13)
0: .long startup_continue
#
# params at 10400 (setup.h)
#
.org PARMAREA
.long 0,0 # IPL_DEVICE
.long 0,0 # INITRD_START
.long 0,0 # INITRD_SIZE
.org COMMAND_LINE
.byte "root=/dev/ram0 ro"
.byte 0
.org 0x11000
startup_continue:
basr %r13,0 # get base
.LPG1: mvi __LC_AR_MODE_ID,0 # set ESA flag (mode 0)
.LPG1:
mvi __LC_AR_MODE_ID,0 # set ESA flag (mode 0)
lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
l %r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area
# move IPL device to lowcore
......
......@@ -10,29 +10,6 @@
*
*/
#
# startup-code at 0x10000, running in absolute addressing mode
# this is called either by the ipl loader or directly by PSW restart
# or linload or SALIPL
#
.org 0x10000
startup:basr %r13,0 # get base
.LPG0: l %r13,0f-.LPG0(%r13)
b 0(%r13)
0: .long startup_continue
#
# params at 10400 (setup.h)
#
.org PARMAREA
.quad 0 # IPL_DEVICE
.quad 0 # INITRD_START
.quad 0 # INITRD_SIZE
.org COMMAND_LINE
.byte "root=/dev/ram0 ro"
.byte 0
.org 0x11000
startup_continue:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment