Merge tag 'at91-ab-4.14-dt2' of...

Merge tag 'at91-ab-4.14-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt

DT for 4.14

 - sama5d2: add classD, ISC and QSPI
 - New SoM and board: sama5d27 SoM1
 - at91sam9g45: add AC97

* tag 'at91-ab-4.14-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: dts: at91: at91sam9g45: add AC97
  ARM: dts: at91: sama5d2_xplained: add pin muxing and enable classd
  ARM: dts: at91: sama5d2: add classd nodes
  ARM: dts: at91: sama5d2_xplained: use pin macros instead of numbers
  ARM: dts: at91: at91-sama5d27_som1_ek: Add sama5d27 SoM1 EK support
  ARM: dts: at91: at91-sama5d27_som1: add sama5d27 SoM1 support
  ARM: dts: at91: sama5d2: add isc node
  ARM: dts: at91: sama5d2: add QSPI nodes
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/Makefile

@@ -46,6 +46,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
 	at91sam9x35ek.dtb
 dtb-$(CONFIG_SOC_SAM_V7) += \
 	at91-kizbox2.dtb \
+	at91-sama5d27_som1_ek.dtb \
 	at91-sama5d2_xplained.dtb \
 	at91-sama5d3_xplained.dtb \
 	at91-tse850-3.dtb \

arch/arm/boot/dts/at91-sama5d27_som1.dtsi

+/*
+ * at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board
+ *
+ *  Copyright (c) 2017, Microchip Technology Inc.
+ *                2017 Cristian Birsan <cristian.birsan@microchip.com>
+ *                2017 Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+
+/ {
+	model = "Atmel SAMA5D27 SoM1";
+	compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_default>;
+				phy-mode = "rmii";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioA>;
+					interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+				};
+			};
+
+			pinctrl@fc038000 {
+
+				pinctrl_macb0_default: macb0_default {
+					pinmux = <PIN_PD9__GTXCK>,
+						 <PIN_PD10__GTXEN>,
+						 <PIN_PD11__GRXDV>,
+						 <PIN_PD12__GRXER>,
+						 <PIN_PD13__GRX0>,
+						 <PIN_PD14__GRX1>,
+						 <PIN_PD15__GTX0>,
+						 <PIN_PD16__GTX1>,
+						 <PIN_PD17__GMDC>,
+						 <PIN_PD18__GMDIO>;
+					bias-disable;
+				};
+
+				pinctrl_macb0_phy_irq: macb0_phy_irq {
+					pinmux = <PIN_PD31__GPIO>;
+					bias-disable;
+				};
+			};
+		};
+	};
+};

arch/arm/boot/dts/at91-sama5d2_xplained.dts

@@ -68,7 +68,7 @@ main_xtal {
 
 	ahb {
 		usb0: gadget@00300000 {
-			atmel,vbus-gpio = <&pioA 31 GPIO_ACTIVE_HIGH>;
+			atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usba_vbus>;
 			status = "okay";
@@ -76,8 +76,8 @@ usb0: gadget@00300000 {
 
 		usb1: ohci@00400000 {
 			num-ports = <3>;
-			atmel,vbus-gpio = <0 /* &pioA 41 GPIO_ACTIVE_HIGH */
-					   &pioA 42 GPIO_ACTIVE_HIGH
+			atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
+					   &pioA PIN_PB10 GPIO_ACTIVE_HIGH
 					   0
 					  >;
 			pinctrl-names = "default";
@@ -127,7 +127,7 @@ macb0: ethernet@f8008000 {
 				ethernet-phy@1 {
 					reg = <0x1>;
 					interrupt-parent = <&pioA>;
-					interrupts = <73 IRQ_TYPE_LEVEL_LOW>;
+					interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
 				};
 			};
 
@@ -160,9 +160,9 @@ pmic@5b {
 					compatible = "active-semi,act8945a";
 					reg = <0x5b>;
 					active-semi,vsel-high;
-					active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
-					active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
-					active-semi,irq_gpios = <&pioA 45 GPIO_ACTIVE_LOW>;
+					active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
+					active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
+					active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>;
 					active-semi,input-voltage-threshold-microvolt = <6600>;
 					active-semi,precondition-timeout = <40>;
 					active-semi,total-timeout = <3>;
@@ -355,6 +355,14 @@ pinctrl_charger_lbo: charger_lbo {
 					bias-pull-up;
 				};
 
+				pinctrl_classd_default: classd_default {
+					pinmux = <PIN_PB1__CLASSD_R0>,
+						 <PIN_PB2__CLASSD_R1>,
+						 <PIN_PB3__CLASSD_R2>,
+						 <PIN_PB4__CLASSD_R3>;
+					bias-pull-up;
+				};
+
 				pinctrl_flx0_default: flx0_default {
 					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
 						 <PIN_PB29__FLEXCOM0_IO1>;
@@ -488,6 +496,14 @@ pinctrl_usba_vbus: usba_vbus {
 
 			};
 
+			classd: classd@fc048000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_classd_default>;
+				atmel,pwm-type = "diff";
+				atmel,non-overlap-time = <10>;
+				status = "okay";
+			};
+
 			can1: can@fc050000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_can1_default>;
@@ -504,7 +520,7 @@ gpio_keys {
 
 		bp1 {
 			label = "PB_USER";
-			gpios = <&pioA 41 GPIO_ACTIVE_LOW>;
+			gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
 			linux,code = <0x104>;
 		};
 	};
@@ -517,17 +533,18 @@ leds {
 
 		red {
 			label = "red";
-			gpios = <&pioA 38 GPIO_ACTIVE_LOW>;
+			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
 		};
 
+
 		green {
 			label = "green";
-			gpios = <&pioA 37 GPIO_ACTIVE_LOW>;
+			gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
 		};
 
 		blue {
 			label = "blue";
-			gpios = <&pioA 32 GPIO_ACTIVE_LOW>;
+			gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 	};

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -455,6 +455,16 @@ pinctrl@fffff200 {
 				      >;
 
 				/* shared pinctrl settings */
+				ac97 {
+					pinctrl_ac97: ac97-0 {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* AC97RX */
+							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* AC97TX */
+							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* AC97FS */
+							 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* AC97CK */
+					};
+				};
+
 				adc0 {
 					pinctrl_adc0_adtrg: adc0_adtrg {
 						atmel,pins = <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
@@ -1043,6 +1053,17 @@ ssc1: ssc@fffa0000 {
 				status = "disabled";
 			};
 
+			ac97: sound@fffac000 {
+				compatible = "atmel,at91sam9263-ac97c";
+				reg = <0xfffac000 0x4000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 4>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ac97>;
+				clocks = <&ac97_clk>;
+				clock-names = "ac97_clk";
+				status = "disabled";
+			};
+
 			adc0: adc@fffb0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;

arch/arm/boot/dts/at91sam9m10g45ek.dts

@@ -166,6 +166,10 @@ usb2: gadget@fff78000 {
 				status = "okay";
 			};
 
+			ac97: sound@fffac000 {
+				status = "okay";
+			};
+
 			adc0: adc@fffb0000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <

arch/arm/boot/dts/sama5d2.dtsi

@@ -416,6 +416,17 @@ hlcdc_pwm: hlcdc-pwm {
 				};
 			};
 
+			isc: isc@f0008000 {
+				compatible = "atmel,sama5d2-isc";
+				reg = <0xf0008000 0x4000>;
+				interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&isc_clk>, <&iscck>, <&isc_gclk>;
+				clock-names = "hclock", "iscck", "gck";
+				#clock-cells = <0>;
+				clock-output-names = "isc-mck";
+				status = "disabled";
+			};
+
 			ramc0: ramc@f000c000 {
 				compatible = "atmel,sama5d3-ddramc";
 				reg = <0xf000c000 0x200>;
@@ -494,6 +505,24 @@ plladiv: plladivck {
 					clocks = <&plla>;
 				};
 
+				audio_pll_frac: audiopll_fracck {
+					compatible = "atmel,sama5d2-clk-audio-pll-frac";
+					#clock-cells = <0>;
+					clocks = <&main>;
+				};
+
+				audio_pll_pad: audiopll_padck {
+					compatible = "atmel,sama5d2-clk-audio-pll-pad";
+					#clock-cells = <0>;
+					clocks = <&audio_pll_frac>;
+				};
+
+				audio_pll_pmc: audiopll_pmcck {
+					compatible = "atmel,sama5d2-clk-audio-pll-pmc";
+					#clock-cells = <0>;
+					clocks = <&audio_pll_frac>;
+				};
+
 				utmi: utmick {
 					compatible = "atmel,at91sam9x5-clk-utmi";
 					#clock-cells = <0>;
@@ -895,7 +924,7 @@ gck {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					interrupt-parent = <&pmc>;
-					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>;
 
 					sdmmc0_gclk: sdmmc0_gclk {
 						#clock-cells = <0>;
@@ -925,6 +954,11 @@ pwm_gclk: pwm_gclk {
 						atmel,clk-output-range = <0 83000000>;
 					};
 
+					isc_gclk: isc_gclk {
+						#clock-cells = <0>;
+						reg = <46>;
+					};
+
 					pdmic_gclk: pdmic_gclk {
 						#clock-cells = <0>;
 						reg = <48>;
@@ -951,9 +985,37 @@ can1_gclk: can1_gclk {
 						reg = <57>;
 						atmel,clk-output-range = <0 80000000>;
 					};
+
+					classd_gclk: classd_gclk {
+						#clock-cells = <0>;
+						reg = <59>;
+						atmel,clk-output-range = <0 100000000>;
+					};
 				};
 			};
 
+			qspi0: spi@f0020000 {
+				compatible = "atmel,sama5d2-qspi";
+				reg = <0xf0020000 0x100>, <0xd0000000 0x08000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&qspi0_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			qspi1: spi@f0024000 {
+				compatible = "atmel,sama5d2-qspi";
+				reg = <0xf0024000 0x100>, <0xd8000000 0x08000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&qspi1_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			sha@f0028000 {
 				compatible = "atmel,at91sam9g46-sha";
 				reg = <0xf0028000 0x100>;
@@ -1406,6 +1468,19 @@ AT91_XDMAC_DT_PERID(28))>,
 				status = "okay";
 			};
 
+			classd: classd@fc048000 {
+				compatible = "atmel,sama5d2-classd";
+				reg = <0xfc048000 0x100>;
+				interrupts = <59 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(47))>;
+				dma-names = "tx";
+				clocks = <&classd_clk>, <&classd_gclk>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
 			can1: can@fc050000 {
 				compatible = "bosch,m_can";
 				reg = <0xfc050000 0x4000>, <0x210000 0x4000>;