Staging: rt2860: add RT3090 chipset support

Add support for RT3090 chipset
(based on 2009_0612_RT3090_Linux_STA_V2.1.0.0_DPO).

Tested with RT2860.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/rt2860/Kconfig

 config RT2860
-	tristate "Ralink 2860 wireless support"
+	tristate "Ralink 2860/3090 wireless support"
 	depends on PCI && X86 && WLAN
 	---help---
-	  This is an experimental driver for the Ralink 2860 wireless chip.
+	  This is an experimental driver for the Ralink 2860 and 3090
+	  wireless chips.

drivers/staging/rt2860/Makefile

@@ -3,6 +3,7 @@ obj-$(CONFIG_RT2860)	+= rt2860sta.o
 # TODO: all of these should be removed
 EXTRA_CFLAGS += -DLINUX -DAGGREGATION_SUPPORT -DPIGGYBACK_SUPPORT -DWMM_SUPPORT
 EXTRA_CFLAGS += -DRTMP_MAC_PCI -DRTMP_PCI_SUPPORT -DRT2860
+EXTRA_CFLAGS += -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DRT30xx -DRT3090
 EXTRA_CFLAGS += -DDBG
 
 rt2860sta-objs :=	\
@@ -46,4 +47,8 @@ rt2860sta-objs :=	\
 	common/cmm_mac_pci.o	\
 	common/cmm_data_pci.o	\
 	common/ee_prom.o	\
-	common/rtmp_mcu.o
+	common/rtmp_mcu.o	\
+	common/ee_efuse.o	\
+	chips/rt30xx.o		\
+	common/rt_rf.o		\
+	chips/rt3090.o

drivers/staging/rt2860/chip/mac_pci.h

@@ -133,6 +133,18 @@ typedef	struct	PACKED _RXD_STRUC{
 	UINT32		Rsv1:13;
 }	RXD_STRUC, *PRXD_STRUC, RT28XX_RXD_STRUC, *PRT28XX_RXD_STRUC;
 
+typedef union _TX_ATTENUATION_CTRL_STRUC {
+	struct
+	{
+		ULONG	RF_ISOLATION_ENABLE:1;
+		ULONG	Reserve2:7;
+		ULONG	PCIE_PHY_TX_ATTEN_VALUE:3;
+		ULONG	PCIE_PHY_TX_ATTEN_EN:1;
+		ULONG	Reserve1:20;
+	} field;
+
+	ULONG	word;
+} TX_ATTENUATION_CTRL_STRUC, *PTX_ATTENUATION_CTRL_STRUC;
 
 /* ----------------- EEPROM Related MACRO ----------------- */
 

drivers/staging/rt2860/chip/rt3090.h

+/*
+ *************************************************************************
+ * Ralink Tech Inc.
+ * 5F., No.36, Taiyuan St., Jhubei City,
+ * Hsinchu County 302,
+ * Taiwan, R.O.C.
+ *
+ * (c) Copyright 2002-2007, Ralink Technology, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify  *
+ * it under the terms of the GNU General Public License as published by  *
+ * the Free Software Foundation; either version 2 of the License, or     *
+ * (at your option) any later version.                                   *
+ *                                                                       *
+ * This program is distributed in the hope that it will be useful,       *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+ * GNU General Public License for more details.                          *
+ *                                                                       *
+ * You should have received a copy of the GNU General Public License     *
+ * along with this program; if not, write to the                         *
+ * Free Software Foundation, Inc.,                                       *
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
+ *                                                                       *
+ *************************************************************************
+
+    Module Name:
+	rt3090.h
+
+    Abstract:
+
+    Revision History:
+    Who          When          What
+    ---------    ----------    ----------------------------------------------
+ */
+
+#ifndef __RT3090_H__
+#define __RT3090_H__
+
+#ifdef RT3090
+
+#ifndef RTMP_PCI_SUPPORT
+#error "For RT3090, you should define the compile flag -DRTMP_PCI_SUPPORT"
+#endif
+
+#ifndef RTMP_MAC_PCI
+#error "For RT3090, you should define the compile flag -DRTMP_MAC_PCI"
+#endif
+
+#ifndef RTMP_RF_RW_SUPPORT
+#error "For RT3090, you should define the compile flag -DRTMP_RF_RW_SUPPORT"
+#endif
+
+#ifndef RT30xx
+#error "For RT3090, you should define the compile flag -DRT30xx"
+#endif
+
+#define PCIE_PS_SUPPORT
+
+#include "mac_pci.h"
+#include "rt30xx.h"
+
+//
+// Device ID & Vendor ID, these values should match EEPROM value
+//
+#define NIC3090_PCIe_DEVICE_ID  0x3090		// 1T/1R miniCard
+#define NIC3091_PCIe_DEVICE_ID  0x3091		// 1T/2R miniCard
+#define NIC3092_PCIe_DEVICE_ID  0x3092		// 2T/2R miniCard
+
+#endif // RT3090 //
+
+#endif //__RT3090_H__ //

drivers/staging/rt2860/chip/rtmp_phy.h

@@ -278,6 +278,7 @@
 	But for some chipset which didn't have mcu (e.g., RBUS based chipset), we
 	will use this function too and didn't access the bbp register via the MCU.
 */
+#if 0
 #define RTMP_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV)			\
 	do{														\
 		if ((_A)->bPCIclkOff == FALSE)							\
@@ -288,7 +289,99 @@
 				RTMP_BBP_IO_READ8((_A), (_I), (_pV), TRUE);	\
 		}													\
 	}while(0)
-
+#else
+// Read BBP register by register's ID. Generate PER to test BA
+#define RTMP_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV)						\
+{																		\
+	BBP_CSR_CFG_STRUC	BbpCsr;											\
+	int					i, k;			\
+	BOOLEAN					brc;			\
+	BbpCsr.field.Busy = IDLE;			\
+	if ((IS_RT3090((_A)) || IS_RT3572((_A)) || IS_RT3390((_A))) && ((_A)->StaCfg.PSControl.field.rt30xxPowerMode == 3)	\
+		&& ((_A)->StaCfg.PSControl.field.EnableNewPS == TRUE)	\
+		&& ((_A)->bPCIclkOff == FALSE)	\
+		&& ((_A)->brt30xxBanMcuCmd == FALSE))	\
+	{																	\
+		for (i=0; i<MAX_BUSY_COUNT; i++)									\
+		{																	\
+			RTMP_IO_READ32(_A, H2M_BBP_AGENT, &BbpCsr.word);				\
+			if (BbpCsr.field.Busy == BUSY)									\
+			{																\
+				continue;													\
+			}																\
+			BbpCsr.word = 0;												\
+			BbpCsr.field.fRead = 1;											\
+			BbpCsr.field.BBP_RW_MODE = 1;									\
+			BbpCsr.field.Busy = 1;											\
+			BbpCsr.field.RegNum = _I;										\
+			RTMP_IO_WRITE32(_A, H2M_BBP_AGENT, BbpCsr.word);				\
+			brc = AsicSendCommandToMcu(_A, 0x80, 0xff, 0x0, 0x0);					\
+			if (brc == TRUE)																\
+			{																\
+				for (k=0; k<MAX_BUSY_COUNT; k++)								\
+				{																\
+					RTMP_IO_READ32(_A, H2M_BBP_AGENT, &BbpCsr.word);			\
+					if (BbpCsr.field.Busy == IDLE)								\
+						break;													\
+				}																\
+				if ((BbpCsr.field.Busy == IDLE) &&								\
+					(BbpCsr.field.RegNum == _I))								\
+				{																\
+					*(_pV) = (UCHAR)BbpCsr.field.Value;							\
+					break;														\
+				}																\
+			}																\
+			else																\
+			{																\
+				BbpCsr.field.Busy = 0;											\
+				RTMP_IO_WRITE32(_A, H2M_BBP_AGENT, BbpCsr.word);				\
+			}																\
+		}																	\
+	}	\
+	else if (!((IS_RT3090((_A)) || IS_RT3572((_A)) || IS_RT3390((_A))) && ((_A)->StaCfg.PSControl.field.rt30xxPowerMode == 3)	\
+		&& ((_A)->StaCfg.PSControl.field.EnableNewPS == TRUE))	\
+		&& ((_A)->bPCIclkOff == FALSE))	\
+	{																	\
+		for (i=0; i<MAX_BUSY_COUNT; i++)									\
+		{																	\
+			RTMP_IO_READ32(_A, H2M_BBP_AGENT, &BbpCsr.word);				\
+			if (BbpCsr.field.Busy == BUSY)									\
+			{																\
+				continue;													\
+			}																\
+			BbpCsr.word = 0;												\
+			BbpCsr.field.fRead = 1;											\
+			BbpCsr.field.BBP_RW_MODE = 1;									\
+			BbpCsr.field.Busy = 1;											\
+			BbpCsr.field.RegNum = _I;										\
+			RTMP_IO_WRITE32(_A, H2M_BBP_AGENT, BbpCsr.word);				\
+			AsicSendCommandToMcu(_A, 0x80, 0xff, 0x0, 0x0);					\
+			for (k=0; k<MAX_BUSY_COUNT; k++)								\
+			{																\
+				RTMP_IO_READ32(_A, H2M_BBP_AGENT, &BbpCsr.word);			\
+				if (BbpCsr.field.Busy == IDLE)								\
+					break;													\
+			}																\
+			if ((BbpCsr.field.Busy == IDLE) &&								\
+				(BbpCsr.field.RegNum == _I))								\
+			{																\
+				*(_pV) = (UCHAR)BbpCsr.field.Value;							\
+				break;														\
+			}																\
+		}																	\
+	}																	\
+	else										\
+	{																	\
+		DBGPRINT_ERR((" , brt30xxBanMcuCmd = %d, Read BBP %d \n", (_A)->brt30xxBanMcuCmd, (_I)));	\
+		*(_pV) = (_A)->BbpWriteLatch[_I];								\
+	}																	\
+	if ((BbpCsr.field.Busy == BUSY) || ((_A)->bPCIclkOff == TRUE))										\
+	{																	\
+		DBGPRINT_ERR(("BBP read R%d=0x%x fail\n", _I, BbpCsr.word));	\
+		*(_pV) = (_A)->BbpWriteLatch[_I];								\
+	}																	\
+}
+#endif // 0 //
 
 /*
 	basic marco for BBP write operation.
@@ -348,6 +441,7 @@
 	But for some chipset which didn't have mcu (e.g., RBUS based chipset), we
 	will use this function too and didn't access the bbp register via the MCU.
 */
+#if 0
 #define RTMP_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _pV)			\
 	do{														\
 		if ((_A)->bPCIclkOff == FALSE)							\
@@ -358,6 +452,93 @@
 				RTMP_BBP_IO_WRITE8((_A), (_I), (_pV), TRUE);	\
 		}													\
 	}while(0)
+#else
+// Write BBP register by register's ID & value
+#define RTMP_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V)						\
+{																		\
+	BBP_CSR_CFG_STRUC	BbpCsr;											\
+	INT					BusyCnt = 0;										\
+	BOOLEAN					brc;			\
+	if (_I < MAX_NUM_OF_BBP_LATCH)										\
+	{																	\
+		if ((IS_RT3090((_A)) || IS_RT3572((_A)) || IS_RT3390((_A))) && ((_A)->StaCfg.PSControl.field.rt30xxPowerMode == 3)	\
+			&& ((_A)->StaCfg.PSControl.field.EnableNewPS == TRUE)	\
+			&& ((_A)->bPCIclkOff == FALSE)	\
+			&& ((_A)->brt30xxBanMcuCmd == FALSE))	\
+		{																	\
+			if (_A->AccessBBPFailCount > 20)									\
+			{																	\
+				AsicResetBBPAgent(_A);				\
+				_A->AccessBBPFailCount = 0;											\
+			}																	\
+			for (BusyCnt=0; BusyCnt<MAX_BUSY_COUNT; BusyCnt++)					\
+			{																	\
+				RTMP_IO_READ32(_A, H2M_BBP_AGENT, &BbpCsr.word);				\
+				if (BbpCsr.field.Busy == BUSY)									\
+					continue;													\
+				BbpCsr.word = 0;												\
+				BbpCsr.field.fRead = 0;											\
+				BbpCsr.field.BBP_RW_MODE = 1;									\
+				BbpCsr.field.Busy = 1;											\
+				BbpCsr.field.Value = _V;										\
+				BbpCsr.field.RegNum = _I;										\
+				RTMP_IO_WRITE32(_A, H2M_BBP_AGENT, BbpCsr.word);				\
+				brc = AsicSendCommandToMcu(_A, 0x80, 0xff, 0x0, 0x0);					\
+				if (brc == TRUE)																\
+				{																\
+					(_A)->BbpWriteLatch[_I] = _V;									\
+				}																\
+				else																\
+				{																\
+					BbpCsr.field.Busy = 0;											\
+					RTMP_IO_WRITE32(_A, H2M_BBP_AGENT, BbpCsr.word);				\
+				}																\
+				break;															\
+			}																	\
+		}																	\
+		else if (!((IS_RT3090((_A)) || IS_RT3572((_A)) || IS_RT3390((_A))) && ((_A)->StaCfg.PSControl.field.rt30xxPowerMode == 3)	\
+			&& ((_A)->StaCfg.PSControl.field.EnableNewPS == TRUE))	\
+			&& ((_A)->bPCIclkOff == FALSE))	\
+		{																	\
+			if (_A->AccessBBPFailCount > 20)									\
+			{																	\
+				AsicResetBBPAgent(_A);				\
+				_A->AccessBBPFailCount = 0;											\
+			}																	\
+			for (BusyCnt=0; BusyCnt<MAX_BUSY_COUNT; BusyCnt++)					\
+			{																	\
+				RTMP_IO_READ32(_A, H2M_BBP_AGENT, &BbpCsr.word);				\
+				if (BbpCsr.field.Busy == BUSY)									\
+					continue;													\
+				BbpCsr.word = 0;												\
+				BbpCsr.field.fRead = 0;											\
+				BbpCsr.field.BBP_RW_MODE = 1;									\
+				BbpCsr.field.Busy = 1;											\
+				BbpCsr.field.Value = _V;										\
+				BbpCsr.field.RegNum = _I;										\
+				RTMP_IO_WRITE32(_A, H2M_BBP_AGENT, BbpCsr.word);				\
+				AsicSendCommandToMcu(_A, 0x80, 0xff, 0x0, 0x0);					\
+				(_A)->BbpWriteLatch[_I] = _V;									\
+				break;															\
+			}																	\
+		}																	\
+		else										\
+		{																	\
+			DBGPRINT_ERR(("  brt30xxBanMcuCmd = %d. Write BBP %d \n",  (_A)->brt30xxBanMcuCmd, (_I)));	\
+		}																	\
+		if ((BusyCnt == MAX_BUSY_COUNT) || ((_A)->bPCIclkOff == TRUE))			\
+		{																	\
+			if (BusyCnt == MAX_BUSY_COUNT)					\
+				(_A)->AccessBBPFailCount++;					\
+			DBGPRINT_ERR(("BBP write R%d=0x%x fail. BusyCnt= %d.bPCIclkOff = %d. \n", _I, BbpCsr.word, BusyCnt, (_A)->bPCIclkOff ));	\
+		}																	\
+	}																		\
+	else																		\
+	{																		\
+		DBGPRINT_ERR(("****** BBP_Write_Latch Buffer exceeds max boundry ****** \n"));	\
+	}																		\
+}
+#endif // 0 //
 
 #endif // RTMP_MAC_PCI //
 #ifdef RTMP_MAC_USB

drivers/staging/rt2860/chips/rt3090.c

+/*
+ *************************************************************************
+ * Ralink Tech Inc.
+ * 5F., No.36, Taiyuan St., Jhubei City,
+ * Hsinchu County 302,
+ * Taiwan, R.O.C.
+ *
+ * (c) Copyright 2002-2007, Ralink Technology, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify  *
+ * it under the terms of the GNU General Public License as published by  *
+ * the Free Software Foundation; either version 2 of the License, or     *
+ * (at your option) any later version.                                   *
+ *                                                                       *
+ * This program is distributed in the hope that it will be useful,       *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+ * GNU General Public License for more details.                          *
+ *                                                                       *
+ * You should have received a copy of the GNU General Public License     *
+ * along with this program; if not, write to the                         *
+ * Free Software Foundation, Inc.,                                       *
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
+ *                                                                       *
+ *************************************************************************
+
+	Module Name:
+	rt3090.c
+
+	Abstract:
+	Specific funcitons and variables for RT3070
+
+	Revision History:
+	Who         When          What
+	--------    ----------    ----------------------------------------------
+*/
+
+#ifdef RT3090
+
+#include "../rt_config.h"
+
+
+#ifndef RTMP_RF_RW_SUPPORT
+#error "You Should Enable compile flag RTMP_RF_RW_SUPPORT for this chip"
+#endif // RTMP_RF_RW_SUPPORT //
+
+
+VOID NICInitRT3090RFRegisters(IN PRTMP_ADAPTER pAd)
+{
+		INT i;
+	// Driver must read EEPROM to get RfIcType before initial RF registers
+	// Initialize RF register to default value
+	if (IS_RT3090(pAd))
+	{
+		// Init RF calibration
+		// Driver should toggle RF R30 bit7 before init RF registers
+		UINT32 RfReg = 0, data;
+
+		RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR)&RfReg);
+		RfReg |= 0x80;
+		RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg);
+		RTMPusecDelay(1000);
+		RfReg &= 0x7F;
+		RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg);
+
+		// init R24, R31
+		RT30xxWriteRFRegister(pAd, RF_R24, 0x0F);
+		RT30xxWriteRFRegister(pAd, RF_R31, 0x0F);
+
+		// RT309x version E has fixed this issue
+		if ((pAd->NicConfig2.field.DACTestBit == 1) && ((pAd->MACVersion & 0xffff) < 0x0211))
+		{
+			// patch tx EVM issue temporarily
+			RTMP_IO_READ32(pAd, LDO_CFG0, &data);
+			data = ((data & 0xE0FFFFFF) | 0x0D000000);
+			RTMP_IO_WRITE32(pAd, LDO_CFG0, data);
+		}
+		else
+		{
+			RTMP_IO_READ32(pAd, LDO_CFG0, &data);
+			data = ((data & 0xE0FFFFFF) | 0x01000000);
+			RTMP_IO_WRITE32(pAd, LDO_CFG0, data);
+		}
+
+		// patch LNA_PE_G1 failed issue
+		RTMP_IO_READ32(pAd, GPIO_SWITCH, &data);
+		data &= ~(0x20);
+		RTMP_IO_WRITE32(pAd, GPIO_SWITCH, data);
+
+		// Initialize RF register to default value
+		for (i = 0; i < NUM_RF_REG_PARMS; i++)
+		{
+			RT30xxWriteRFRegister(pAd, RT30xx_RFRegTable[i].Register, RT30xx_RFRegTable[i].Value);
+		}
+
+		// Driver should set RF R6 bit6 on before calibration
+		RT30xxReadRFRegister(pAd, RF_R06, (PUCHAR)&RfReg);
+		RfReg |= 0x40;
+		RT30xxWriteRFRegister(pAd, RF_R06, (UCHAR)RfReg);
+
+		//For RF filter Calibration
+		RTMPFilterCalibration(pAd);
+
+		// Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration()
+		if ((pAd->MACVersion & 0xffff) < 0x0211)
+			RT30xxWriteRFRegister(pAd, RF_R27, 0x3);
+
+		// set led open drain enable
+		RTMP_IO_READ32(pAd, OPT_14, &data);
+		data |= 0x01;
+		RTMP_IO_WRITE32(pAd, OPT_14, data);
+
+		// set default antenna as main
+		if (pAd->RfIcType == RFIC_3020)
+			AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
+
+		// add by johnli, RF power sequence setup, load RF normal operation-mode setup
+		RT30xxLoadRFNormalModeSetup(pAd);
+	}
+
+}
+
+#endif // RT3090 //

drivers/staging/rt2860/chips/rt30xx.c

@@ -101,7 +101,13 @@ VOID RT30xxSetRxAnt(
 	if (Ant == 0)
 	{
 		// Main antenna
+#ifdef RTMP_MAC_PCI
+		RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
+		x |= (EESK);
+		RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
+#else
 		AsicSendCommandToMcu(pAd, 0x73, 0xFF, 0x1, 0x0);
+#endif // RTMP_MAC_PCI //
 
 		RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
 		Value &= ~(0x0808);
@@ -111,7 +117,13 @@ VOID RT30xxSetRxAnt(
 	else
 	{
 		// Aux antenna
+#ifdef RTMP_MAC_PCI
+		RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
+		x &= ~(EESK);
+		RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
+#else
 		AsicSendCommandToMcu(pAd, 0x73, 0xFF, 0x0, 0x0);
+#endif // RTMP_MAC_PCI //
 		RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
 		Value &= ~(0x0808);
 		Value |= 0x08;

drivers/staging/rt2860/common/cmm_asic.c

@@ -808,6 +808,28 @@ VOID AsicSwitchChannel(
 
 		RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg);
 
+#if defined(RT3090) || defined(RT3390)
+		// PCIe PHY Transmit attenuation adjustment
+		if (IS_RT3090A(pAd) || IS_RT3390(pAd))
+		{
+			TX_ATTENUATION_CTRL_STRUC TxAttenuationCtrl = {0};
+
+			RTMP_IO_READ32(pAd, PCIE_PHY_TX_ATTENUATION_CTRL, &TxAttenuationCtrl.word);
+
+			if (Channel == 14) // Channel #14
+			{
+				TxAttenuationCtrl.field.PCIE_PHY_TX_ATTEN_EN = 1; // Enable PCIe PHY Tx attenuation
+				TxAttenuationCtrl.field.PCIE_PHY_TX_ATTEN_VALUE = 4; // 9/16 full drive level
+			}
+			else // Channel #1~#13
+			{
+				TxAttenuationCtrl.field.PCIE_PHY_TX_ATTEN_EN = 0; // Disable PCIe PHY Tx attenuation
+				TxAttenuationCtrl.field.PCIE_PHY_TX_ATTEN_VALUE = 0; // n/a
+			}
+
+			RTMP_IO_WRITE32(pAd, PCIE_PHY_TX_ATTENUATION_CTRL, TxAttenuationCtrl.word);
+		}
+#endif
 	}
 	else
 	{
@@ -2477,6 +2499,13 @@ VOID AsicTurnOnRFClk(
 	UCHAR			index;
 	RTMP_RF_REGS	*RFRegTable;
 
+#ifdef PCIE_PS_SUPPORT
+	// The RF programming sequence is difference between 3xxx and 2xxx
+	if ((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd)))
+	{
+		return;
+	}
+#endif // PCIE_PS_SUPPORT //
 
 	RFRegTable = RF2850RegTable;
 

drivers/staging/rt2860/common/cmm_data_pci.c

@@ -638,9 +638,6 @@ BOOLEAN	RTMPHandleTxRingDmaDoneInterrupt(
 	if (TxRingBitmap.field.Ac0DmaDone)
 		bReschedule = RTMPFreeTXDUponTxDmaDone(pAd, QID_AC_BE);
 
-	if (TxRingBitmap.field.HccaDmaDone)
-		bReschedule |= RTMPFreeTXDUponTxDmaDone(pAd, QID_HCCA);
-
 	if (TxRingBitmap.field.Ac3DmaDone)
 		bReschedule |= RTMPFreeTXDUponTxDmaDone(pAd, QID_AC_VO);
 
@@ -791,7 +788,6 @@ VOID	RTMPHandleRxCoherentInterrupt(
 	RTMPRingCleanUp(pAd, QID_AC_BK);
 	RTMPRingCleanUp(pAd, QID_AC_VI);
 	RTMPRingCleanUp(pAd, QID_AC_VO);
-	RTMPRingCleanUp(pAd, QID_HCCA);
 	RTMPRingCleanUp(pAd, QID_MGMT);
 	RTMPRingCleanUp(pAd, QID_RX);
 
@@ -1147,7 +1143,5 @@ VOID RTMPWriteTxDescriptor(
 	pTxD->QSEL= (QueueSEL);
 	//RT2860c??  fixed using EDCA queue for test...  We doubt Queue1 has problem.  2006-09-26 Jan
 	//pTxD->QSEL= FIFO_EDCA;
-	if (pAd->bGenOneHCCA == TRUE)
-		pTxD->QSEL= FIFO_HCCA;
 	pTxD->DMADONE = 0;
 }

drivers/staging/rt2860/common/cmm_profile.c

@@ -1266,6 +1266,49 @@ NDIS_STATUS	RTMPSetProfileParameters(
 				DBGPRINT(RT_DEBUG_TRACE, ("%s::(NetworkType=%d)\n", __func__, pAd->StaCfg.BssType));
 			}
 		}
+#ifdef RTMP_MAC_PCI
+		//NewPCIePS
+		if(RTMPGetKeyParameter("NewPCIePS", tmpbuf, 10, pBuffer, TRUE))
+		{
+			UCHAR temp_buffer = (UCHAR) simple_strtol(tmpbuf, 0, 10);
+			if(temp_buffer>0)
+				pAd->StaCfg.PSControl.field.EnableNewPS=TRUE;
+				else
+					pAd->StaCfg.PSControl.field.EnableNewPS=FALSE;
+			DBGPRINT(RT_DEBUG_TRACE, ("NewPCIePS=%d\n", pAd->StaCfg.PSControl.field.EnableNewPS));
+		}
+#endif // RTMP_MAC_PCI //
+#ifdef RT3090
+		//PCIePowerLevel
+
+		if(RTMPGetKeyParameter("PCIePowerLevel", tmpbuf, 10, pBuffer, TRUE))
+		{
+			pAd->StaCfg.PSControl.field.rt30xxPowerMode = (UCHAR) simple_strtol(tmpbuf, 0, 10);
+			DBGPRINT(RT_DEBUG_TRACE, ("PCIePowerLevel=%d\n", pAd->StaCfg.PSControl.field.rt30xxPowerMode));
+		}
+		//FollowHostASPM
+		if(RTMPGetKeyParameter("FollowHostASPM", tmpbuf, 10, pBuffer, TRUE))
+		{
+			UCHAR temp_buffer = (UCHAR) simple_strtol(tmpbuf, 0, 10);
+
+			if(temp_buffer>0)
+				pAd->StaCfg.PSControl.field.rt30xxFollowHostASPM=TRUE;
+				else
+					pAd->StaCfg.PSControl.field.rt30xxFollowHostASPM=FALSE;
+			DBGPRINT(RT_DEBUG_TRACE, ("rt30xxFollowHostASPM=%d\n", pAd->StaCfg.PSControl.field.rt30xxFollowHostASPM));
+		}
+		//ForceTestASPM
+		if(RTMPGetKeyParameter("ForceTestASPM", tmpbuf, 10, pBuffer, TRUE))
+		{
+			UCHAR temp_buffer = (UCHAR) simple_strtol(tmpbuf, 0, 10);
+
+			if(temp_buffer>0)
+				pAd->StaCfg.PSControl.field.rt30xxForceASPMTest=TRUE;
+				else
+					pAd->StaCfg.PSControl.field.rt30xxForceASPMTest=FALSE;
+			DBGPRINT(RT_DEBUG_TRACE, ("rt30xxForceASPM=%d\n", pAd->StaCfg.PSControl.field.rt30xxForceASPMTest));
+		}
+#endif // RT3090 //
 		//Channel
 		if(RTMPGetKeyParameter("Channel", tmpbuf, 10, pBuffer, TRUE))
 		{

drivers/staging/rt2860/common/cmm_sync.c

@@ -432,19 +432,6 @@ VOID ScanNextChannel(
 		}
 
 		{
-#ifdef RT2860
-			/*
-				If all peer Ad-hoc clients leave, driver would do LinkDown and LinkUp.
-				In LinkUp, CommonCfg.Ssid would copy SSID from MlmeAux.
-				To prevent SSID is zero or wrong in Beacon, need to recover MlmeAux.SSID here.
-			*/
-			if (ADHOC_ON(pAd))
-			{
-				NdisZeroMemory(pAd->MlmeAux.Ssid, MAX_LEN_OF_SSID);
-				pAd->MlmeAux.SsidLen = pAd->CommonCfg.SsidLen;
-				NdisMoveMemory(pAd->MlmeAux.Ssid, pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen);
-			}
-#endif // RT2860 //
 			//
 			// To prevent data lost.
 			// Send an NULL data with turned PSM bit on to current associated AP before SCAN progress.

drivers/staging/rt2860/common/mlme.c

@@ -397,7 +397,7 @@ NDIS_STATUS MlmeInit(
 
 		{
 #ifdef RTMP_PCI_SUPPORT
-	        if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
+	        if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE))
 	        {
 	            // only PCIe cards need these two timers
 	    		RTMPInitTimer(pAd, &pAd->Mlme.PsPollTimer, GET_TIMER_FUNCTION(PsPollWakeExec), pAd, FALSE);
@@ -569,7 +569,8 @@ VOID MlmeHalt(
 
 
 #ifdef RTMP_MAC_PCI
-	    if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
+	    if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE)
+			&&(pAd->StaCfg.PSControl.field.EnableNewPS == TRUE))
 	    {
 	   	    RTMPCancelTimer(&pAd->Mlme.PsPollTimer,		&Cancelled);
 		    RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer,		&Cancelled);
@@ -678,6 +679,7 @@ VOID MlmePeriodicExec(
 {
 	ULONG			TxTotalCnt;
 	PRTMP_ADAPTER	pAd = (RTMP_ADAPTER *)FunctionContext;
+	SHORT	realavgrssi;
 
 #ifdef RTMP_MAC_PCI
 	{
@@ -691,7 +693,27 @@ VOID MlmePeriodicExec(
 			UINT32				data = 0;
 
 			// Read GPIO pin2 as Hardware controlled radio state
+#ifndef RT3090
 			RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &data);
+#endif // RT3090 //
+//KH(PCIE PS):Added based on Jane<--
+#ifdef RT3090
+// Read GPIO pin2 as Hardware controlled radio state
+// We need to Read GPIO if HW said so no mater what advance power saving
+if ((pAd->OpMode == OPMODE_STA) && (IDLE_ON(pAd))
+	&& (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF))
+	&& (pAd->StaCfg.PSControl.field.EnablePSinIdle == TRUE))
+	{
+	// Want to make sure device goes to L0 state before reading register.
+	RTMPPCIeLinkCtrlValueRestore(pAd, 0);
+	RTMP_IO_FORCE_READ32(pAd, GPIO_CTRL_CFG, &data);
+	RTMPPCIeLinkCtrlSetting(pAd, 3);
+	}
+else
+	RTMP_IO_FORCE_READ32(pAd, GPIO_CTRL_CFG, &data);
+#endif // RT3090 //
+//KH(PCIE PS):Added based on Jane-->
+
 			if (data & 0x04)
 			{
 				pAd->StaCfg.bHwRadio = TRUE;
@@ -1187,6 +1209,60 @@ VOID STAMlmePeriodicExec(
 		 }
 	}
 #endif
+#ifdef PCIE_PS_SUPPORT
+// don't perform idle-power-save mechanism within 3 min after driver initialization.
+// This can make rebooter test more robust
+if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE))
+	{
+	if ((pAd->OpMode == OPMODE_STA) && (IDLE_ON(pAd))
+		&& (pAd->Mlme.SyncMachine.CurrState == SYNC_IDLE)
+		&& (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE)
+		&& (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF)))
+		{
+		if (IS_RT3090(pAd)|| IS_RT3572(pAd) || IS_RT3390(pAd))
+			{
+			if (pAd->StaCfg.PSControl.field.EnableNewPS == TRUE)
+	{
+				DBGPRINT(RT_DEBUG_TRACE, ("%s::%d\n",__FUNCTION__,__LINE__));
+
+				RT28xxPciAsicRadioOff(pAd, GUI_IDLE_POWER_SAVE, 0);
+				}
+			else
+				{
+				DBGPRINT(RT_DEBUG_TRACE, ("%s::%d\n",__FUNCTION__,__LINE__));
+				AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x2);
+				// Wait command success
+				AsicCheckCommanOk(pAd, PowerSafeCID);
+				RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF);
+				DBGPRINT(RT_DEBUG_TRACE, ("PSM - rt30xx Issue Sleep command)\n"));
+				}
+			}
+		else if (pAd->Mlme.OneSecPeriodicRound > 180)
+                {
+			if (pAd->StaCfg.PSControl.field.EnableNewPS == TRUE)
+				{
+				DBGPRINT(RT_DEBUG_TRACE, ("%s::%d\n",__FUNCTION__,__LINE__));
+				RT28xxPciAsicRadioOff(pAd, GUI_IDLE_POWER_SAVE, 0);
+				 }
+				else
+				{
+				DBGPRINT(RT_DEBUG_TRACE, ("%s::%d\n",__FUNCTION__,__LINE__));
+				AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x02);
+				// Wait command success
+				AsicCheckCommanOk(pAd, PowerSafeCID);
+				RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF);
+				DBGPRINT(RT_DEBUG_TRACE, ("PSM -  rt28xx Issue Sleep command)\n"));
+				}
+		 }
+	}
+	else
+		{
+		DBGPRINT(RT_DEBUG_TRACE,("STAMlmePeriodicExec MMCHK - CommonCfg.Ssid[%d]=%c%c%c%c... MlmeAux.Ssid[%d]=%c%c%c%c...\n",
+			pAd->CommonCfg.SsidLen, pAd->CommonCfg.Ssid[0], pAd->CommonCfg.Ssid[1], pAd->CommonCfg.Ssid[2], pAd->CommonCfg.Ssid[3],
+			pAd->MlmeAux.SsidLen, pAd->MlmeAux.Ssid[0], pAd->MlmeAux.Ssid[1], pAd->MlmeAux.Ssid[2], pAd->MlmeAux.Ssid[3]));
+		}
+	}
+#endif // PCIE_PS_SUPPORT //
 
     if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE)
     {
@@ -1275,10 +1351,6 @@ VOID STAMlmePeriodicExec(
 			{
 			DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - No BEACON. Dead CQI. Auto Recovery attempt #%ld\n", pAd->RalinkCounters.BadCQIAutoRecoveryCount));
 
-			if ((pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE) &&
-				(pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2))
-				pAd->StaCfg.bLostAp = TRUE;
-
 			// Lost AP, send disconnect & link down event
 			LinkDown(pAd, FALSE);
 
@@ -2240,10 +2312,6 @@ VOID MlmeDynamicTxRateSwitching(
 		}
 
 		pEntry->LastTxOkCount = TxSuccess;
-#ifdef RT2860
-		pNextTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(pEntry->CurrTxRateIndex+1)*5];
-#endif // RT2860 //
-#if defined(RT2870) || defined(RT3070)
 		{
 			UCHAR tmpTxRate;
 
@@ -2261,7 +2329,6 @@ VOID MlmeDynamicTxRateSwitching(
 
 			pNextTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(tmpTxRate+1)*5];
 		}
-#endif // RT2870 //
 		if (bTxRateChanged && pNextTxRate)
 		{
 			MlmeSetTxRate(pAd, pEntry, pNextTxRate);
@@ -3805,14 +3872,6 @@ VOID BssTableSsidSort(
 				DBGPRINT(RT_DEBUG_TRACE,("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n"));
 				continue;
 	}
-#ifdef RT2860
-			if ((pAd->CommonCfg.PhyMode == PHY_11GN_MIXED) &&
-				((pInBss->SupRateLen + pInBss->ExtRateLen) < 12))
-	{
-				DBGPRINT(RT_DEBUG_TRACE,("STA is in GN-only Mode, this AP is in B mode.\n"));
-				continue;
-	}
-#endif // RT2860 //
 			// New for WPA2
 			// Check the Authmode first
 			if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
@@ -3921,14 +3980,7 @@ VOID BssTableSsidSort(
 				DBGPRINT(RT_DEBUG_TRACE,("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n"));
 				continue;
 			}
-#ifdef RT2860
-			if ((pAd->CommonCfg.PhyMode == PHY_11GN_MIXED) &&
-				((pInBss->SupRateLen + pInBss->ExtRateLen) < 12))
-			{
-				DBGPRINT(RT_DEBUG_TRACE,("STA is in GN-only Mode, this AP is in B mode.\n"));
-				continue;
-			}
-#endif // RT2860 //
+
 			// New for WPA2
 			// Check the Authmode first
 			if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
@@ -5495,6 +5547,9 @@ VOID AsicEvaluateRxAnt(
 #ifdef RT30xx
 				|| (pAd->EepromAccess)
 #endif // RT30xx //
+#ifdef RT3090
+							|| (pAd->bPCIclkOff == TRUE)
+#endif // RT3090 //
 				)
 			return;
 
@@ -5583,6 +5638,9 @@ VOID AsicRxAntEvalTimeout(
 #ifdef RT30xx
 							|| (pAd->EepromAccess)
 #endif // RT30xx //
+#ifdef RT3090
+							|| (pAd->bPCIclkOff == TRUE)
+#endif // RT3090 //
 							)
 		return;
 

drivers/staging/rt2860/common/rt_rf.c

@@ -187,6 +187,14 @@ VOID RtmpChipOpsRFHook(
 			}
 		}
 #endif // RT3070 //
+#ifdef RT3090
+		if (IS_RT3090(pAd) && (pAd->infType == RTMP_DEV_INF_PCI))
+		{
+			pChipOps->AsicRfTurnOff = RT30xxLoadRFSleepModeSetup;
+			pChipOps->AsicRfInit = NICInitRT3090RFRegisters;
+			pChipOps->AsicReverseRfFromSleepMode = RT30xxReverseRFSleepModeSetup;
+		}
+#endif // RT3090 //
 	}
 #endif // RT30xx //
 }

drivers/staging/rt2860/common/rtmp_init.c

@@ -191,6 +191,9 @@ NDIS_STATUS	RTMPAllocAdapterBlock(
 		NdisAllocateSpinLock(&pAd->MgmtRingLock);
 #ifdef RTMP_MAC_PCI
 		NdisAllocateSpinLock(&pAd->RxRingLock);
+#ifdef RT3090
+	NdisAllocateSpinLock(&pAd->McuCmdLock);
+#endif // RT3090 //
 #endif // RTMP_MAC_PCI //
 
 		for (index =0 ; index < NUM_OF_TX_RING; index++)
@@ -1238,7 +1241,13 @@ VOID	NICInitAsicFromEEPROM(
 		{
 			RTMPSetLED(pAd, LED_RADIO_ON);
 #ifdef RTMP_MAC_PCI
+#ifdef RT3090
+			AsicSendCommandToMcu(pAd, 0x30, PowerRadioOffCID, 0xff, 0x02);
+			AsicCheckCommanOk(pAd, PowerRadioOffCID);
+#endif // RT3090 //
+#ifndef RT3090
 			AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02);
+#endif // RT3090 //
 			AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x00);
 			// 2-1. wait command ok.
 			AsicCheckCommanOk(pAd, PowerWakeCID);
@@ -1246,6 +1255,29 @@ VOID	NICInitAsicFromEEPROM(
 		}
 	}
 
+#ifdef RTMP_MAC_PCI
+#ifdef RT30xx
+		if (IS_RT3090(pAd)|| IS_RT3572(pAd) || IS_RT3390(pAd))
+		{
+			RTMP_CHIP_OP *pChipOps = &pAd->chipOps;
+			if (pChipOps->AsicReverseRfFromSleepMode)
+				pChipOps->AsicReverseRfFromSleepMode(pAd);
+		}
+		// 3090 MCU Wakeup command needs more time to be stable.
+		// Before stable, don't issue other MCU command to prevent from firmware error.
+
+		if ((IS_RT3090(pAd)|| IS_RT3572(pAd) || IS_RT3390(pAd)) && IS_VERSION_AFTER_F(pAd)
+			&& (pAd->StaCfg.PSControl.field.rt30xxPowerMode == 3)
+			&& (pAd->StaCfg.PSControl.field.EnableNewPS == TRUE))
+		{
+			DBGPRINT(RT_DEBUG_TRACE,("%s::%d,release Mcu Lock\n",__FUNCTION__,__LINE__));
+			RTMP_SEM_LOCK(&pAd->McuCmdLock);
+			pAd->brt30xxBanMcuCmd = FALSE;
+			RTMP_SEM_UNLOCK(&pAd->McuCmdLock);
+		}
+#endif // RT30xx //
+#endif // RTMP_MAC_PCI //
+
 	// Turn off patching for cardbus controller
 	if (NicConfig2.field.CardbusAcceleration == 1)
 	{
@@ -1443,11 +1475,6 @@ NDIS_STATUS	NICInitializeAdapter(
 	RTMP_IO_WRITE32(pAd, TX_BASE_PTR3, Value);
 	DBGPRINT(RT_DEBUG_TRACE, ("--> TX_BASE_PTR3 : 0x%x\n", Value));
 
-	// Write HCCA base address register
-	  Value = RTMP_GetPhysicalAddressLow(pAd->TxRing[QID_HCCA].Cell[0].AllocPa);
-	  RTMP_IO_WRITE32(pAd, TX_BASE_PTR4, Value);
-	DBGPRINT(RT_DEBUG_TRACE, ("--> TX_BASE_PTR4 : 0x%x\n", Value));
-
 	// Write MGMT_BASE_CSR register
 	Value = RTMP_GetPhysicalAddressLow(pAd->MgmtRing.Cell[0].AllocPa);
 	RTMP_IO_WRITE32(pAd, TX_BASE_PTR5, Value);
@@ -1641,7 +1668,7 @@ NDIS_STATUS	NICInitializeAsic(
 	for(Index=0; Index<NUM_MAC_REG_PARMS; Index++)
 	{
 #ifdef RT30xx
-		if ((MACRegTable[Index].Register == TX_SW_CFG0) && (IS_RT3070(pAd) || IS_RT3071(pAd) || IS_RT3572(pAd)))
+		if ((MACRegTable[Index].Register == TX_SW_CFG0) && (IS_RT3070(pAd) || IS_RT3071(pAd) || IS_RT3572(pAd) || IS_RT3090(pAd) ||  IS_RT3390(pAd)))
 		{
 			MACRegTable[Index].Value = 0x00000400;
 		}
@@ -1713,6 +1740,11 @@ NDIS_STATUS	NICInitializeAsic(
 	// PCI and USB are not the same because PCI driver needs to wait for PCI bus ready
 	RTMP_IO_WRITE32(pAd, H2M_BBP_AGENT, 0);	// initialize BBP R/W access agent
 	RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CSR, 0);
+#ifdef RT3090
+	//2008/11/28:KH add to fix the dead rf frequency offset bug<--
+	AsicSendCommandToMcu(pAd, 0x72, 0, 0, 0);
+	//2008/11/28:KH add to fix the dead rf frequency offset bug-->
+#endif // RT3090 //
 	RTMPusecDelay(1000);
 
 	// Read BBP register, make sure BBP is up and running before write new data
@@ -2588,6 +2620,8 @@ VOID	UserCfgInit(
 	pAd->LedIndicatorStrength = 0;
 	pAd->RLnkCtrlOffset = 0;
 	pAd->HostLnkCtrlOffset = 0;
+	pAd->StaCfg.PSControl.field.EnableNewPS=TRUE;
+	pAd->CheckDmaBusyCount = 0;
 #endif // RTMP_MAC_PCI //
 
 	pAd->bAutoTxAgcA = FALSE;			// Default is OFF
@@ -2600,8 +2634,6 @@ VOID	UserCfgInit(
 	pAd->bForcePrintRX = FALSE;
 	pAd->bStaFifoTest = FALSE;
 	pAd->bProtectionTest = FALSE;
-	pAd->bHCCATest = FALSE;
-	pAd->bGenOneHCCA = FALSE;
 	pAd->CommonCfg.Dsifs = 10;      // in units of usec
 	pAd->CommonCfg.TxPower = 100; //mW
 	pAd->CommonCfg.TxPowerPercentage = 0xffffffff; // AUTO
@@ -2720,6 +2752,15 @@ VOID	UserCfgInit(
 		pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
 	}
 
+#ifdef PCIE_PS_SUPPORT
+pAd->brt30xxBanMcuCmd = FALSE;
+pAd->b3090ESpecialChip = FALSE;
+//KH Debug:the following must be removed
+pAd->StaCfg.PSControl.field.rt30xxPowerMode=3;
+pAd->StaCfg.PSControl.field.rt30xxForceASPMTest=0;
+pAd->StaCfg.PSControl.field.rt30xxFollowHostASPM=1;
+#endif // PCIE_PS_SUPPORT //
+
 	// global variables mXXXX used in MAC protocol state machines
 	OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
 	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_ADHOC_ON);
@@ -2757,6 +2798,9 @@ VOID	UserCfgInit(
 			pAd->StaCfg.LastScanTime -= (10 * OS_HZ);
 
 		NdisZeroMemory(pAd->nickname, IW_ESSID_MAX_SIZE+1);
+#ifdef RTMP_MAC_PCI
+		sprintf((PSTRING) pAd->nickname, "RT2860STA");
+#endif // RTMP_MAC_PCI //
 #ifdef RTMP_MAC_USB
 			sprintf((PSTRING) pAd->nickname, "RT2870STA");
 #endif // RTMP_MAC_USB //
@@ -2766,7 +2810,6 @@ VOID	UserCfgInit(
 		pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_DISABLE;
 		pAd->StaCfg.bRSN_IE_FromWpaSupplicant = FALSE;
 		pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_ENABLE;
-		pAd->StaCfg.bLostAp = FALSE;
 
 		NdisZeroMemory(pAd->StaCfg.ReplayCounter, 8);
 
@@ -3272,7 +3315,7 @@ int rt28xx_init(
 	// NICLoadFirmware will hang forever when interface is up again.
 	// RT2860 PCI
 	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) &&
-		OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
+		OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE))
 	{
 		AUTO_WAKEUP_STRUC AutoWakeupCfg;
 			AsicForceWakeup(pAd, TRUE);
@@ -3307,6 +3350,16 @@ int rt28xx_init(
 	DBGPRINT(RT_DEBUG_TRACE, ("MAC_CSR0  [ Ver:Rev=0x%08x]\n", pAd->MACVersion));
 
 #ifdef RTMP_MAC_PCI
+#ifdef PCIE_PS_SUPPORT
+	/*Iverson patch PCIE L1 issue to make sure that driver can be read,write ,BBP and RF register  at pcie L.1 level */
+	if ((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))&&OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE))
+	{
+		RTMP_IO_READ32(pAd, AUX_CTRL, &MacCsr0);
+		MacCsr0 |= 0x402;
+		RTMP_IO_WRITE32(pAd, AUX_CTRL, MacCsr0);
+		DBGPRINT(RT_DEBUG_TRACE, ("AUX_CTRL = 0x%x\n", MacCsr0));
+	}
+#endif // PCIE_PS_SUPPORT //
 
 	// To fix driver disable/enable hang issue when radio off
 	RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x2);

drivers/staging/rt2860/common/rtmp_mcu.c

@@ -38,8 +38,9 @@
 
 #include	"../rt_config.h"
 
-#ifdef RT2860
+#if defined(RT2860) || defined(RT3090)
 #include "firmware.h"
+#include "../../rt3090/firmware.h"
 #endif
 #ifdef RT2870
 #include "../../rt3070/firmware.h"
@@ -115,20 +116,18 @@ NDIS_STATUS RtmpAsicLoadFirmware(
 {
 
 	NDIS_STATUS		Status = NDIS_STATUS_SUCCESS;
-	PUCHAR			pFirmwareImage;
+	PUCHAR			pFirmwareImage = NULL;
 	ULONG			FileLength, Index;
-	//ULONG			firm;
 	UINT32			MacReg = 0;
 	UINT32			Version = (pAd->MACVersion >> 16);
 
-//	pFirmwareImage = FirmwareImage;
-//	FileLength = sizeof(FirmwareImage);
-
 	// New 8k byte firmware size for RT3071/RT3072
 	{
 #ifdef RTMP_MAC_PCI
-		if ((Version == 0x2860) || (Version == 0x3572) || IS_RT3090(pAd))
-		{
+		if (IS_RT3090(pAd) || IS_RT3390(pAd)) {
+			pFirmwareImage = FirmwareImage_3090;
+			FileLength = FIRMWAREIMAGE_MAX_LENGTH;
+		} else {
 			pFirmwareImage = FirmwareImage_2860;
 			FileLength = FIRMWAREIMAGE_MAX_LENGTH;
 		}
@@ -190,9 +189,72 @@ INT RtmpAsicSendCommandToMcu(
 	HOST_CMD_CSR_STRUC	H2MCmd;
 	H2M_MAILBOX_STRUC	H2MMailbox;
 	ULONG				i = 0;
-#ifdef RTMP_MAC_PCI
-#endif // RTMP_MAC_PCI //
 
+#ifdef PCIE_PS_SUPPORT
+	// 3090F power solution 3 has hw limitation that needs to ban all mcu command
+	// when firmware is in radio state.  For other chip doesn't have this limitation.
+	if (((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd)) && IS_VERSION_AFTER_F(pAd)) && IS_VERSION_AFTER_F(pAd)
+		&& (pAd->StaCfg.PSControl.field.rt30xxPowerMode == 3)
+		&& (pAd->StaCfg.PSControl.field.EnableNewPS == TRUE))
+	{
+		RTMP_SEM_LOCK(&pAd->McuCmdLock);
+		if ((pAd->brt30xxBanMcuCmd == TRUE)
+			&& (Command != WAKE_MCU_CMD) && (Command != RFOFF_MCU_CMD))
+		{
+			RTMP_SEM_UNLOCK(&pAd->McuCmdLock);
+			DBGPRINT(RT_DEBUG_TRACE, (" Ban Mcu Cmd %x in sleep mode\n",  Command));
+			return FALSE;
+		}
+		else if ((Command == SLEEP_MCU_CMD)
+			||(Command == RFOFF_MCU_CMD))
+		{
+			pAd->brt30xxBanMcuCmd = TRUE;
+		}
+		else if (Command != WAKE_MCU_CMD)
+		{
+			pAd->brt30xxBanMcuCmd = FALSE;
+		}
+
+		RTMP_SEM_UNLOCK(&pAd->McuCmdLock);
+
+	}
+	if (((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd)) && IS_VERSION_AFTER_F(pAd)) && IS_VERSION_AFTER_F(pAd)
+		&& (pAd->StaCfg.PSControl.field.rt30xxPowerMode == 3)
+		&& (pAd->StaCfg.PSControl.field.EnableNewPS == TRUE)
+		&& (Command == WAKE_MCU_CMD))
+	{
+
+	do
+	{
+			RTMP_IO_FORCE_READ32(pAd, H2M_MAILBOX_CSR, &H2MMailbox.word);
+			if (H2MMailbox.field.Owner == 0)
+				break;
+
+			RTMPusecDelay(2);
+			DBGPRINT(RT_DEBUG_INFO, ("AsicSendCommanToMcu::Mail box is busy\n"));
+		} while(i++ < 100);
+
+		if (i >= 100)
+		{
+			DBGPRINT_ERR(("H2M_MAILBOX still hold by MCU. command fail\n"));
+			return FALSE;
+		}
+
+		H2MMailbox.field.Owner	  = 1;	   // pass ownership to MCU
+		H2MMailbox.field.CmdToken = Token;
+		H2MMailbox.field.HighByte = Arg1;
+		H2MMailbox.field.LowByte  = Arg0;
+		RTMP_IO_FORCE_WRITE32(pAd, H2M_MAILBOX_CSR, H2MMailbox.word);
+
+		H2MCmd.word			  = 0;
+		H2MCmd.field.HostCommand  = Command;
+		RTMP_IO_FORCE_WRITE32(pAd, HOST_CMD_CSR, H2MCmd.word);
+
+
+	}
+	else
+#endif // PCIE_PS_SUPPORT //
+	{
 	do
 	{
 		RTMP_IO_READ32(pAd, H2M_MAILBOX_CSR, &H2MMailbox.word);
@@ -228,6 +290,22 @@ INT RtmpAsicSendCommandToMcu(
 	if (Command != 0x80)
 	{
 	}
+}
+#ifdef PCIE_PS_SUPPORT
+	// 3090 MCU Wakeup command needs more time to be stable.
+	// Before stable, don't issue other MCU command to prevent from firmware error.
+	if (((IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd)) && IS_VERSION_AFTER_F(pAd)) && IS_VERSION_AFTER_F(pAd)
+		&& (pAd->StaCfg.PSControl.field.rt30xxPowerMode == 3)
+		&& (pAd->StaCfg.PSControl.field.EnableNewPS == TRUE)
+		&& (Command == WAKE_MCU_CMD))
+	{
+		RTMPusecDelay(2000);
+		//Put this is after RF programming.
+		//NdisAcquireSpinLock(&pAd->McuCmdLock);
+		//pAd->brt30xxBanMcuCmd = FALSE;
+		//NdisReleaseSpinLock(&pAd->McuCmdLock);
+	}
+#endif // PCIE_PS_SUPPORT //
 
 	return TRUE;
 }

drivers/staging/rt2860/common/rtmp_timer.c

@@ -59,10 +59,10 @@ BUILD_TIMER_FUNCTION(DisassocTimeout);
 BUILD_TIMER_FUNCTION(LinkDownExec);
 BUILD_TIMER_FUNCTION(StaQuickResponeForRateUpExec);
 BUILD_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc);
-#ifdef RTMP_PCI_SUPPORT
+#ifdef RTMP_MAC_PCI
 BUILD_TIMER_FUNCTION(PsPollWakeExec);
 BUILD_TIMER_FUNCTION(RadioOnExec);
-#endif // RTMP_PCI_SUPPORT //
+#endif // RTMP_MAC_PCI //
 #ifdef RTMP_MAC_USB
 BUILD_TIMER_FUNCTION(RtmpUsbStaAsicForceWakeupTimeout);
 #endif // RTMP_MAC_USB //

drivers/staging/rt2860/iface/rtmp_pci.h

@@ -38,9 +38,7 @@
 
 #define RT28XX_PUT_DEVICE(dev_p)
 
-#ifndef SA_SHIRQ
 #define SA_SHIRQ IRQF_SHARED
-#endif
 
 #ifdef PCI_MSI_SUPPORT
 #define RTMP_MSI_ENABLE(_pAd) \

drivers/staging/rt2860/rt_linux.c

@@ -284,6 +284,9 @@ VOID	RTMPFreeAdapter(
 
 #ifdef RTMP_MAC_PCI
 	NdisFreeSpinLock(&pAd->RxRingLock);
+#ifdef RT3090
+NdisFreeSpinLock(&pAd->McuCmdLock);
+#endif // RT3090 //
 #endif // RTMP_MAC_PCI //
 
 	for (index =0 ; index < NUM_OF_TX_RING; index++)

drivers/staging/rt2860/rt_linux.h

@@ -590,6 +590,12 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size, int
 		*_pV = 0;													\
 }
 
+#define RTMP_IO_FORCE_READ32(_A, _R, _pV)							\
+{																	\
+	(*_pV = readl((void *)((_A)->CSRBaseAddress + MAC_CSR0)));		\
+	(*_pV = readl((void *)((_A)->CSRBaseAddress + (_R))));			\
+}
+
 #define RTMP_IO_READ8(_A, _R, _pV)								\
 {																\
 	(*_pV = readl((void *)((_A)->CSRBaseAddress + MAC_CSR0)));			\
@@ -605,7 +611,12 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size, int
     }                                                               \
 }
 
-
+#define RTMP_IO_FORCE_WRITE32(_A, _R, _V)												\
+{																				\
+	UINT	Val;																\
+	Val = readl((void *)((_A)->CSRBaseAddress + MAC_CSR0));			\
+	writel(_V, (void *)((_A)->CSRBaseAddress + (_R)));								\
+}
 
 #if defined(RALINK_2880) || defined(RALINK_3052)
 #define RTMP_IO_WRITE8(_A, _R, _V)            \

drivers/staging/rt2860/rt_main_dev.c

@@ -226,9 +226,9 @@ int rt28xx_close(IN PNET_DEV dev)
 		return 0; // close ok
 
 	{
-#ifdef RTMP_PCI_SUPPORT
+#ifdef RTMP_MAC_PCI
 		RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_CLOSE);
-#endif // RTMP_PCI_SUPPORT //
+#endif // RTMP_MAC_PCI //
 
 		// If dirver doesn't wake up firmware here,
 		// NICLoadFirmware will hang forever when interface is up again.
@@ -320,6 +320,10 @@ int rt28xx_close(IN PNET_DEV dev)
 
 
 			brc=RT28xxPciAsicRadioOff(pAd, RTMP_HALT, 0);
+
+//In  solution 3 of 3090F, the bPCIclkOff will be set to TRUE after calling RT28xxPciAsicRadioOff
+			pAd->bPCIclkOff = FALSE;
+
 			if (brc==FALSE)
 	{
 				DBGPRINT(RT_DEBUG_ERROR,("%s call RT28xxPciAsicRadioOff fail !!\n", __func__));
@@ -400,11 +404,6 @@ int rt28xx_open(IN PNET_DEV dev)
 		return -1;
 	}
 
-#ifdef RTMP_PCI_SUPPORT
-        RTMPInitPCIeLinkCtrlValue(pAd);
-#endif // RTMP_PCI_SUPPORT //
-
-
 	if (net_dev->priv_flags == INT_MAIN)
 	{
 		if (pAd->OpMode == OPMODE_STA)
@@ -449,7 +448,9 @@ int rt28xx_open(IN PNET_DEV dev)
 //	RTMP_IO_WRITE32(pAd, XIFS_TIME_CFG, reg);
 
 	}
-
+#ifdef RTMP_MAC_PCI
+        RTMPInitPCIeLinkCtrlValue(pAd);
+#endif // RTMP_MAC_PCI //
 
 	return (retval);
 

drivers/staging/rt2860/rt_pci_rbus.c

@@ -236,7 +236,6 @@ VOID Invalid_Remaining_Packet(
 	PhysicalAddress = PCI_MAP_SINGLE(pAd, (void *)(VirtualAddress+1600), RX_BUFFER_NORMSIZE-1600, -1, PCI_DMA_FROMDEVICE);
 }
 
-
 NDIS_STATUS RtmpNetTaskInit(IN RTMP_ADAPTER *pAd)
 {
 	POS_COOKIE pObj;
@@ -871,7 +870,6 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size, int
 	pAd=(PRTMP_ADAPTER)handle;
 	pObj = (POS_COOKIE)pAd->OS_Cookie;
 
-	if (size > 0)
-		pci_unmap_single(pObj->pci_dev, dma_addr, size, direction);
+	pci_unmap_single(pObj->pci_dev, dma_addr, size, direction);
 
 }

drivers/staging/rt2860/rtmp.h

@@ -913,6 +913,20 @@ typedef enum _ABGBAND_STATE_ {
 	A_BAND,
 } ABGBAND_STATE;
 
+#ifdef RTMP_MAC_PCI
+// Power save method control
+typedef	union	_PS_CONTROL	{
+	struct	{
+		ULONG		EnablePSinIdle:1;			// Enable radio off when not connect to AP. radio on only when sitesurvey,
+		ULONG		EnableNewPS:1;		// Enable new  Chip power save fucntion . New method can only be applied in chip version after 2872. and PCIe.
+		ULONG		rt30xxPowerMode:2;			// Power Level Mode for rt30xx chip
+		ULONG		rt30xxFollowHostASPM:1;			// Card Follows Host's setting for rt30xx chip.
+		ULONG		rt30xxForceASPMTest:1;			// Force enable L1 for rt30xx chip. This has higher priority than rt30xxFollowHostASPM Mode.
+		ULONG		rsv:26;			// Radio Measurement Enable
+	}	field;
+	ULONG			word;
+}	PS_CONTROL, *PPS_CONTROL;
+#endif // RTMP_MAC_PCI //
 
 /***************************************************************************
   *	structure for MLME state machine
@@ -1542,7 +1556,6 @@ typedef struct _STA_ADMIN_CONFIG {
     UCHAR               WpaSupplicantUP;
 	UCHAR				WpaSupplicantScanCount;
 	BOOLEAN				bRSN_IE_FromWpaSupplicant;
-	BOOLEAN				bLostAp;
 
     CHAR                dev_name[16];
     USHORT              OriDevType;
@@ -1557,6 +1570,10 @@ typedef struct _STA_ADMIN_CONFIG {
 
 #ifdef RTMP_MAC_PCI
     UCHAR       BBPR3;
+	// PS Control has 2 meanings for advanced power save function.
+	// 1. EnablePSinIdle : When no connection, always radio off except need to do site survey.
+	// 2. EnableNewPS  : will save more current in sleep or radio off mode.
+	PS_CONTROL				PSControl;
 #endif // RTMP_MAC_PCI //
 
 
@@ -1815,9 +1832,17 @@ struct _RTMP_ADAPTER
     USHORT		            HostLnkCtrlConfiguration;
     USHORT                  HostLnkCtrlOffset;
 	USHORT		            PCIePowerSaveLevel;
+	ULONG				Rt3xxHostLinkCtrl;	// USed for 3090F chip
+	ULONG				Rt3xxRalinkLinkCtrl;	// USed for 3090F chip
+	USHORT				DeviceID;           // Read from PCI config
+	ULONG				AccessBBPFailCount;
    	BOOLEAN					bPCIclkOff;						// flag that indicate if the PICE power status in Configuration SPace..
 	BOOLEAN					bPCIclkOffDisableTx;			//
 
+	BOOLEAN					brt30xxBanMcuCmd;	//when = 0xff means all commands are ok to set .
+	BOOLEAN					b3090ESpecialChip;	//3090E special chip that write EEPROM 0x24=0x9280.
+	ULONG					CheckDmaBusyCount;  // Check Interrupt Status Register Count.
+
 	UINT					int_enable_reg;
 	UINT					int_disable_mask;
 	UINT					int_pending;
@@ -1923,6 +1948,9 @@ struct _RTMP_ADAPTER
 #ifdef RTMP_MAC_PCI
 	RTMP_RX_RING            RxRing;
 	NDIS_SPIN_LOCK          RxRingLock;                 // Rx Ring spinlock
+#ifdef RT3090
+	NDIS_SPIN_LOCK          McuCmdLock;              //MCU Command Queue spinlock
+#endif // RT3090 //
 #endif // RTMP_MAC_PCI //
 #ifdef RTMP_MAC_USB
 	RX_CONTEXT				RxContext[RX_RING_SIZE];  // 1 for redundant multiple IRP bulk in.
@@ -2179,8 +2207,6 @@ struct _RTMP_ADAPTER
 	//BOOLEAN		bDisablescanning;		//defined in RT2870 USB
 	BOOLEAN		bStaFifoTest;
 	BOOLEAN		bProtectionTest;
-	BOOLEAN		bHCCATest;
-	BOOLEAN		bGenOneHCCA;
 	BOOLEAN		bBroadComHT;
 	//+++Following add from RT2870 USB.
 	ULONG		BulkOutReq;
@@ -2333,6 +2359,7 @@ typedef struct _TX_BLK_
 	UCHAR				HeaderBuf[128];				// TempBuffer for TX_INFO + TX_WI + 802.11 Header + padding + AMSDU SubHeader + LLC/SNAP
 	//RT2870 2.1.0.0 uses only 80 bytes
 	//RT3070 2.1.1.0 uses only 96 bytes
+	//RT3090 2.1.0.0 uses only 96 bytes
 	UCHAR				MpduHeaderLen;				// 802.11 header length NOT including the padding
 	UCHAR				HdrPadLen;					// recording Header Padding Length;
 	UCHAR				apidx;						// The interface associated to this packet
@@ -2875,10 +2902,6 @@ VOID WpaStaPairwiseKeySetting(
 VOID WpaStaGroupKeySetting(
 	IN	PRTMP_ADAPTER	pAd);
 
-VOID    WpaSendEapolStart(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN  PUCHAR          pBssid);
-
 NDIS_STATUS RTMPCloneNdisPacket(
 	IN  PRTMP_ADAPTER   pAd,
 	IN	BOOLEAN    pInsAMSDUHdr,
@@ -3685,9 +3708,6 @@ VOID ScanNextChannel(
 ULONG MakeIbssBeacon(
 	IN  PRTMP_ADAPTER   pAd);
 
-VOID InitChannelRelatedValue(
-	IN  PRTMP_ADAPTER   pAd);
-
 BOOLEAN MlmeScanReqSanity(
 	IN  PRTMP_ADAPTER   pAd,
 	IN  VOID *Msg,
@@ -4063,6 +4083,10 @@ VOID RT30xxReverseRFSleepModeSetup(
 VOID NICInitRT3070RFRegisters(
 	IN RTMP_ADAPTER *pAd);
 #endif // RT3070 //
+#ifdef RT3090
+VOID NICInitRT3090RFRegisters(
+	IN RTMP_ADAPTER *pAd);
+#endif // RT3090 //
 
 VOID RT30xxHaltAction(
 	IN PRTMP_ADAPTER	pAd);
@@ -5239,7 +5263,6 @@ BOOLEAN RT28xxPciAsicRadioOn(
 	IN PRTMP_ADAPTER pAd,
 	IN UCHAR     Level);
 
-#ifdef RTMP_PCI_SUPPORT
 VOID RTMPInitPCIeLinkCtrlValue(
 	IN	PRTMP_ADAPTER	pAd);
 
@@ -5254,6 +5277,9 @@ VOID RTMPPCIeLinkCtrlSetting(
 	IN	PRTMP_ADAPTER	pAd,
 	IN 	USHORT		Max);
 
+VOID RTMPrt3xSetPCIePowerLinkCtrl(
+	IN	PRTMP_ADAPTER	pAd);
+
 VOID PsPollWakeExec(
 	IN PVOID SystemSpecific1,
 	IN PVOID FunctionContext,
@@ -5265,7 +5291,6 @@ VOID  RadioOnExec(
 	IN PVOID FunctionContext,
 	IN PVOID SystemSpecific2,
 	IN PVOID SystemSpecific3);
-#endif // RTMP_PCI_SUPPORT //
 
 VOID RT28xxPciStaAsicForceWakeup(
 	IN	PRTMP_ADAPTER	pAd,

drivers/staging/rt2860/rtmp_chip.h

@@ -49,6 +49,9 @@
 #ifdef RT3070
 #include "chip/rt3070.h"
 #endif // RT3070 //
+#ifdef RT3090
+#include "chip/rt3090.h"
+#endif // RT3090 //
 
 // We will have a cost down version which mac version is 0x3090xxxx
 //

drivers/staging/rt2860/rtmp_def.h

@@ -221,6 +221,11 @@
 #define fRTMP_PS_GO_TO_SLEEP_NOW         0x00000008
 #define fRTMP_PS_TOGGLE_L1		0x00000010	// Use Toggle L1 mechanism for rt28xx PCIe
 
+#ifdef RT3090
+#define WAKE_MCU_CMD				0x31
+#define SLEEP_MCU_CMD					0x30
+#define RFOFF_MCU_CMD				0x35
+#endif // RT3090 //
 
 #define CCKSETPROTECT		0x1
 #define OFDMSETPROTECT		0x2

drivers/staging/rt2860/sta/assoc.c

@@ -464,18 +464,6 @@ VOID MlmeAssocReqAction(
 						break;
 					}
 				}
-#ifdef RT2860
-				/*
-					When AuthMode is WPA2-Enterprise and AP reboot or STA lost AP,
-					AP would not do PMK cache with STA after STA re-connect to AP again.
-					In this case, driver doesn't need to send PMKID to AP and WpaSupplicant.
-				*/
-				if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) &&
-					(NdisEqualMemory(pAd->MlmeAux.Bssid, pAd->CommonCfg.LastBssid, MAC_ADDR_LEN)))
-				{
-					FoundPMK = FALSE;
-				}
-#endif // RT2860 //
 				if (FoundPMK)
 				{
 					// Set PMK number

drivers/staging/rt2860/sta/auth_rsp.c

@@ -137,10 +137,6 @@ VOID PeerDeauthAction(
 			if (pAd->CommonCfg.bWirelessEvent)
 				RTMPSendWirelessEvent(pAd, IW_DEAUTH_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
 
-			if ((pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE) &&
-				(pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2))
-				pAd->StaCfg.bLostAp = TRUE;
-
             LinkDown(pAd, TRUE);
         }
     }

drivers/staging/rt2860/sta/connect.c

@@ -1125,6 +1125,26 @@ VOID LinkUp(
 
 	COPY_HTSETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(pAd);
 
+#ifdef RTMP_MAC_PCI
+	// Before power save before link up function, We will force use 1R.
+	// So after link up, check Rx antenna # again.
+	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
+	if(pAd->Antenna.field.RxPath == 3)
+	{
+		Value |= (0x10);
+	}
+	else if(pAd->Antenna.field.RxPath == 2)
+	{
+		Value |= (0x8);
+	}
+	else if(pAd->Antenna.field.RxPath == 1)
+	{
+		Value |= (0x0);
+	}
+	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
+	pAd->StaCfg.BBPR3 = Value;
+#endif // RTMP_MAC_PCI //
+
 	if (BssType == BSS_ADHOC)
 	{
 		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_ADHOC_ON);
@@ -1134,8 +1154,6 @@ VOID LinkUp(
 		if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
 			AdhocTurnOnQos(pAd);
 
-		InitChannelRelatedValue(pAd);
-
 		DBGPRINT(RT_DEBUG_TRACE, ("!!!Adhoc LINK UP !!! \n" ));
 	}
 	else
@@ -1146,7 +1164,6 @@ VOID LinkUp(
 		DBGPRINT(RT_DEBUG_TRACE, ("!!!Infra LINK UP !!! \n" ));
 	}
 
-#if defined(RT2870) || defined(RT3070)
 	// 3*3
 	// reset Tx beamforming bit
 	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value);
@@ -1171,6 +1188,9 @@ VOID LinkUp(
 		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
 		Value &= (~0x20);
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
+#ifdef RTMP_MAC_PCI
+            pAd->StaCfg.BBPR3 = Value;
+#endif // RTMP_MAC_PCI //
 
 		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data);
 		Data &= 0xfffffffe;
@@ -1205,6 +1225,9 @@ VOID LinkUp(
 		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
 	    Value |= (0x20);
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
+#ifdef RTMP_MAC_PCI
+            pAd->StaCfg.BBPR3 = Value;
+#endif // RTMP_MAC_PCI //
 
 		if (pAd->MACVersion == 0x28600100)
 		{
@@ -1234,6 +1257,9 @@ VOID LinkUp(
 		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
 		Value &= (~0x20);
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
+#ifdef RTMP_MAC_PCI
+            pAd->StaCfg.BBPR3 = Value;
+#endif // RTMP_MAC_PCI //
 
 		if (pAd->MACVersion == 0x28600100)
 		{
@@ -1247,7 +1273,6 @@ VOID LinkUp(
     }
 
 	RTMPSetAGCInitValue(pAd, pAd->CommonCfg.BBPCurrentBW);
-#endif // RT2870 //
 
 	//
 	// Save BBP_R66 value, it will be used in RTUSBResumeMsduTransmission
@@ -1752,21 +1777,6 @@ VOID LinkUp(
 	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
 
 	RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW);
-
-#ifdef RT2860
-	/*
-		When AuthMode is WPA2-Enterprise and AP reboot or STA lost AP,
-		WpaSupplicant would not send EapolStart to AP after STA re-connect to AP again.
-		In this case, driver would send EapolStart to AP.
-	*/
-	if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) &&
-		(NdisEqualMemory(pAd->CommonCfg.Bssid, pAd->CommonCfg.LastBssid, MAC_ADDR_LEN)) &&
-		(pAd->StaCfg.bLostAp == TRUE))
-	{
-		WpaSendEapolStart(pAd, pAd->CommonCfg.Bssid);
-	}
-#endif // RT2860 //
-	pAd->StaCfg.bLostAp = FALSE;
 }
 
 /*
@@ -1820,7 +1830,7 @@ VOID LinkDown(
 	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED);
 
 #ifdef RTMP_MAC_PCI
-    if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
+    if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE))
     {
 	    BOOLEAN Cancelled;
         pAd->Mlme.bPsPollTimerRunning = FALSE;
@@ -1841,6 +1851,10 @@ VOID LinkDown(
         OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
     }
 
+#ifdef RTMP_MAC_PCI
+	pAd->bPCIclkOff = FALSE;
+#endif // RTMP_MAC_PCI //
+
 	if (ADHOC_ON(pAd))		// Adhoc mode link down
 	{
 		DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN 1!!!\n"));
@@ -2520,139 +2534,3 @@ ULONG MakeIbssBeacon(
 					FrameLen, SupRateLen, ExtRateLen, pAd->CommonCfg.Channel, pAd->CommonCfg.PhyMode));
 	return FrameLen;
 }
-
-VOID InitChannelRelatedValue(
-	IN PRTMP_ADAPTER pAd)
-{
-#ifdef RT2860
-	UCHAR	Value = 0;
-	UINT32	Data = 0;
-
-#ifdef RTMP_MAC_PCI
-	// In power save , We will force use 1R.
-	// So after link up, check Rx antenna # again.
-	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
-	if(pAd->Antenna.field.RxPath == 3)
-	{
-		Value |= (0x10);
-	}
-	else if(pAd->Antenna.field.RxPath == 2)
-	{
-		Value |= (0x8);
-	}
-	else if(pAd->Antenna.field.RxPath == 1)
-	{
-		Value |= (0x0);
-	}
-	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
-	pAd->StaCfg.BBPR3 = Value;
-#endif // RTMP_MAC_PCI //
-
-	pAd->CommonCfg.CentralChannel = pAd->MlmeAux.CentralChannel;
-	pAd->CommonCfg.Channel = pAd->MlmeAux.Channel;
-	// Change to AP channel
-    if ((pAd->CommonCfg.CentralChannel > pAd->CommonCfg.Channel) && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40))
-	{
-		// Must using 40MHz.
-		pAd->CommonCfg.BBPCurrentBW = BW_40;
-		AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
-		AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
-
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value);
-		Value &= (~0x18);
-		Value |= 0x10;
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value);
-
-		//  RX : control channel at lower
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
-		Value &= (~0x20);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
-#ifdef RTMP_MAC_PCI
-        pAd->StaCfg.BBPR3 = Value;
-#endif // RTMP_MAC_PCI //
-
-		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data);
-		Data &= 0xfffffffe;
-		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Data);
-
-		if (pAd->MACVersion == 0x28600100)
-		{
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x1A);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0A);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x16);
-            DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" ));
-		}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("!!!40MHz Lower !!! Control Channel at Below. Central = %d \n", pAd->CommonCfg.CentralChannel ));
-	}
-	else if ((pAd->CommonCfg.CentralChannel < pAd->CommonCfg.Channel) && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40))
-    {
-	    // Must using 40MHz.
-		pAd->CommonCfg.BBPCurrentBW = BW_40;
-		AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
-	    AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
-
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value);
-		Value &= (~0x18);
-		Value |= 0x10;
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value);
-
-		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data);
-		Data |= 0x1;
-		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Data);
-
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
-	    Value |= (0x20);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
-#ifdef RTMP_MAC_PCI
-        pAd->StaCfg.BBPR3 = Value;
-#endif // RTMP_MAC_PCI //
-
-		if (pAd->MACVersion == 0x28600100)
-		{
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x1A);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0A);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x16);
-			    DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" ));
-		}
-
-	    DBGPRINT(RT_DEBUG_TRACE, ("!!! 40MHz Upper !!! Control Channel at UpperCentral = %d \n", pAd->CommonCfg.CentralChannel ));
-    }
-    else
-    {
-	    pAd->CommonCfg.BBPCurrentBW = BW_20;
-		pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
-		AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-		AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value);
-		Value &= (~0x18);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value);
-
-		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data);
-		Data &= 0xfffffffe;
-		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Data);
-
-		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
-		Value &= (~0x20);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
-#ifdef RTMP_MAC_PCI
-        pAd->StaCfg.BBPR3 = Value;
-#endif // RTMP_MAC_PCI //
-
-		if (pAd->MACVersion == 0x28600100)
-		{
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x08);
-			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x11);
-			DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" ));
-		}
-
-	    DBGPRINT(RT_DEBUG_TRACE, ("!!! 20MHz !!! \n" ));
-	}
-
-	RTMPSetAGCInitValue(pAd, pAd->CommonCfg.BBPCurrentBW);
-#endif // RT2860 //
-}
-
-

drivers/staging/rt2860/sta/rtmp_data.c

@@ -1208,7 +1208,6 @@ NDIS_STATUS RTMPFreeTXDRequest(
 		case QID_AC_BE:
 		case QID_AC_VI:
 		case QID_AC_VO:
-		case QID_HCCA:
 			if (pAd->TxRing[QueIdx].TxSwFreeIdx > pAd->TxRing[QueIdx].TxCpuIdx)
 				FreeNumber = pAd->TxRing[QueIdx].TxSwFreeIdx - pAd->TxRing[QueIdx].TxCpuIdx - 1;
 			else

drivers/staging/rt2860/sta/sync.c

@@ -195,13 +195,23 @@ VOID MlmeScanReqAction(
 	pAd->StaCfg.ScanCnt++;
 
 #ifdef RTMP_MAC_PCI
-    if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) &&
+    if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE)) &&
         (IDLE_ON(pAd)) &&
 		(pAd->StaCfg.bRadio == TRUE) &&
 		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF)))
 	{
+	        if (pAd->StaCfg.PSControl.field.EnableNewPS == FALSE)
+		{
+			AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x02);
+			AsicCheckCommanOk(pAd, PowerWakeCID);
+			RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF);
+			DBGPRINT(RT_DEBUG_TRACE, ("PSM - Issue Wake up command \n"));
+		}
+		else
+		{
 		RT28xxPciAsicRadioOn(pAd, GUI_IDLE_POWER_SAVE);
 	}
+	}
 #endif // RTMP_MAC_PCI //
 
 	// first check the parameter sanity
@@ -303,7 +313,7 @@ VOID MlmeJoinReqAction(
 	DBGPRINT(RT_DEBUG_TRACE, ("SYNC - MlmeJoinReqAction(BSS #%ld)\n", pInfo->BssIdx));
 
 #ifdef RTMP_MAC_PCI
-    if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) &&
+    if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE)) &&
         (IDLE_ON(pAd)) &&
 		(pAd->StaCfg.bRadio == TRUE) &&
 		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF)))
@@ -338,9 +348,7 @@ VOID MlmeJoinReqAction(
 	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
 	BBPValue &= (~0x18);
 	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-#ifdef RT2860
-	pAd->CommonCfg.BBPCurrentBW = BW_20;
-#endif // RT2860 //
+
 	DBGPRINT(RT_DEBUG_TRACE, ("SYNC - BBP R4 to 20MHz.l\n"));
 
 	// switch channel and waiting for beacon timer
@@ -898,8 +906,6 @@ VOID PeerBeaconAtJoinAction(
 			else  //Used the default TX Power Percentage.
 				pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
 
-			InitChannelRelatedValue(pAd);
-
 			pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
 			Status = MLME_SUCCESS;
 			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_JOIN_CONF, 2, &Status);
@@ -1317,7 +1323,7 @@ VOID PeerBeacon(
 				if (MessageToMe)
 				{
 #ifdef RTMP_MAC_PCI
-					if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
+					if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE))
 					{
 						// Restore to correct BBP R3 value
 						if (pAd->Antenna.field.RxPath > 1)
@@ -1336,7 +1342,7 @@ VOID PeerBeacon(
 				else if (BcastFlag && (DtimCount == 0) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM))
 				{
 #ifdef RTMP_MAC_PCI
-					if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
+					if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE))
 					{
 						if (pAd->Antenna.field.RxPath > 1)
 						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, pAd->StaCfg.BBPR3);
@@ -1356,7 +1362,7 @@ VOID PeerBeacon(
 					// TODO: consider scheduled HCCA. might not be proper to use traditional DTIM-based power-saving scheme
 					// can we cheat here (i.e. just check MGMT & AC_BE) for better performance?
 #ifdef RTMP_MAC_PCI
-					if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
+					if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE))
 					{
 						if (pAd->Antenna.field.RxPath > 1)
 						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, pAd->StaCfg.BBPR3);

drivers/staging/rt2860/sta/wpa.c

@@ -389,51 +389,3 @@ VOID WpaStaGroupKeySetting(
 							  NULL);
 
 }
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Send EAPoL-Start packet to AP.
-
-	Arguments:
-		pAd         - NIC Adapter pointer
-
-	Return Value:
-		None
-
-	IRQL = DISPATCH_LEVEL
-
-	Note:
-		Actions after link up
-		1. Change the correct parameters
-		2. Send EAPOL - START
-
-	========================================================================
-*/
-VOID    WpaSendEapolStart(
-	IN	PRTMP_ADAPTER	pAd,
-	IN  PUCHAR          pBssid)
-{
-	IEEE8021X_FRAME		Packet;
-	UCHAR               Header802_3[14];
-
-	DBGPRINT(RT_DEBUG_TRACE, ("-----> WpaSendEapolStart\n"));
-
-	NdisZeroMemory(Header802_3,sizeof(UCHAR)*14);
-
-	MAKE_802_3_HEADER(Header802_3, pBssid, &pAd->CurrentAddress[0], EAPOL);
-
-	// Zero message 2 body
-	NdisZeroMemory(&Packet, sizeof(Packet));
-	Packet.Version = EAPOL_VER;
-	Packet.Type    = EAPOLStart;
-	Packet.Length  = cpu2be16(0);
-
-	// Copy frame to Tx ring
-	RTMPToWirelessSta((PRTMP_ADAPTER)pAd, &pAd->MacTab.Content[BSSID_WCID],
-					 Header802_3, LENGTH_802_3, (PUCHAR)&Packet, 4, TRUE);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<----- WpaSendEapolStart\n"));
-}

drivers/staging/rt2860/sta_ioctl.c

@@ -160,6 +160,12 @@ INT Set_PSMode_Proc(
     IN  PRTMP_ADAPTER   pAdapter,
     IN  PSTRING          arg);
 
+#ifdef RT3090
+INT Set_PCIePSLevel_Proc(
+IN  PRTMP_ADAPTER   pAdapter,
+IN  PUCHAR          arg);
+#endif // RT3090 //
+
 INT Set_Wpa_Support(
     IN	PRTMP_ADAPTER	pAd,
 	IN	PSTRING			arg);
@@ -515,6 +521,7 @@ rt_ioctl_giwname(struct net_device *dev,
 {
 	strncpy(name, "Ralink STA", IFNAMSIZ);
 	// RT2870 2.1.0.0 uses "RT2870 Wireless"
+	// RT3090 2.1.0.0 uses "RT2860 Wireless"
 	return 0;
 }
 

drivers/staging/rt2860/wpa.h

@@ -347,13 +347,6 @@ typedef	enum	_WpaMixPairCipher
 	WPA_TKIPAES_WPA2_TKIPAES	= 0x0F,
 }	WPA_MIX_PAIR_CIPHER;
 
-// 802.1x authentication format
-typedef	struct	_IEEE8021X_FRAME	{
-	UCHAR	Version;					// 1.0
-	UCHAR	Type;						// 0 = EAP Packet
-	USHORT	Length;
-}	IEEE8021X_FRAME, *PIEEE8021X_FRAME;
-
 typedef struct PACKED _RSN_IE_HEADER_STRUCT	{
 	UCHAR		Eid;
 	UCHAR		Length;

drivers/staging/rt3090/common/rtmp_mcu.c

@@ -43,7 +43,7 @@
 
 // New 8k byte firmware size for RT3071/RT3072
 #define FIRMWAREIMAGE_MAX_LENGTH	0x2000
-#define FIRMWAREIMAGE_LENGTH			(sizeof (FirmwareImage) / sizeof(UCHAR))
+#define FIRMWAREIMAGE_LENGTH			(sizeof (FirmwareImage_3090) / sizeof(UCHAR))
 #define FIRMWARE_MAJOR_VERSION		0
 
 #define FIRMWAREIMAGEV1_LENGTH		0x1000
@@ -335,8 +335,8 @@ NDIS_STATUS RtmpAsicLoadFirmware(
 	UINT32			MacReg = 0;
 	UINT32			Version = (pAd->MACVersion >> 16);
 
-	pFirmwareImage = FirmwareImage;
-	FileLength = sizeof(FirmwareImage);
+	pFirmwareImage = FirmwareImage_3090;
+	FileLength = sizeof(*pFirmwareImage);
 
 	// New 8k byte firmware size for RT3071/RT3072
 	//DBGPRINT(RT_DEBUG_TRACE, ("Usb Chip\n"));
@@ -347,7 +347,7 @@ NDIS_STATUS RtmpAsicLoadFirmware(
 #ifdef RTMP_MAC_PCI
 		if ((Version == 0x2860) || IS_RT3090(pAd)||IS_RT3390(pAd))
 		{
-			pFirmwareImage = FirmwareImage;
+			pFirmwareImage = FirmwareImage_3090;
 			FileLength = FIRMWAREIMAGE_LENGTH;
 		}
 #endif // RTMP_MAC_PCI //

drivers/staging/rt3090/firmware.h

@@ -2,7 +2,7 @@
 /* AUTO GEN PLEASE DO NOT MODIFY IT */
 
 
-UCHAR FirmwareImage [] = {
+UCHAR FirmwareImage_3090 [] = {
 0x02, 0x02, 0xf3, 0x02, 0x02, 0xa1, 0x22, 0x22, 0xff, 0xff, 0xff, 0x02, 0x01, 0x27, 0xff, 0xff,
 0xff, 0xff, 0xff, 0x02, 0x00, 0x1e, 0xff, 0xff, 0xff, 0xff, 0xff, 0x02, 0x00, 0xd8, 0xc0, 0xe0,
 0xc0, 0xf0, 0xc0, 0x83, 0xc0, 0x82, 0xc0, 0xd0, 0x75, 0xd0, 0x18, 0xc2, 0xaf, 0x30, 0x45, 0x03,