wl1251: use wl12xx_platform_data to pass data

Make use the newly added method to pass platform data for wl1251 too.
This allows to eliminate some redundant code.

Cc: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Kalle Valo <kvalo@adurom.com>
Acked-by: Luciano Coelho <luciano.coelho@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

arch/arm/mach-omap2/board-omap3pandora.c

@@ -642,31 +642,13 @@ static void __init omap3pandora_init_irq(void)
 	omap_gpio_init();
 }
 
-static void pandora_wl1251_set_power(bool enable)
-{
-	/*
-	 * Keep power always on until wl1251_sdio driver learns to re-init
-	 * the chip after powering it down and back up.
-	 */
-}
-
-static struct wl12xx_platform_data pandora_wl1251_pdata = {
-	.set_power	= pandora_wl1251_set_power,
-	.use_eeprom	= true,
-};
-
-static struct platform_device pandora_wl1251_data = {
-	.name           = "wl1251_data",
-	.id             = -1,
-	.dev		= {
-		.platform_data	= &pandora_wl1251_pdata,
-	},
-};
-
-static void pandora_wl1251_init(void)
+static void __init pandora_wl1251_init(void)
 {
+	struct wl12xx_platform_data pandora_wl1251_pdata;
 	int ret;
 
+	memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
+
 	ret = gpio_request(PANDORA_WIFI_IRQ_GPIO, "wl1251 irq");
 	if (ret < 0)
 		goto fail;
@@ -679,6 +661,11 @@ static void pandora_wl1251_init(void)
 	if (pandora_wl1251_pdata.irq < 0)
 		goto fail_irq;
 
+	pandora_wl1251_pdata.use_eeprom = true;
+	ret = wl12xx_set_platform_data(&pandora_wl1251_pdata);
+	if (ret < 0)
+		goto fail_irq;
+
 	return;
 
 fail_irq:
@@ -691,7 +678,6 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
 	&pandora_leds_gpio,
 	&pandora_keys_gpio,
 	&pandora_dss_device,
-	&pandora_wl1251_data,
 	&pandora_vwlan_device,
 };
 

drivers/net/wireless/wl1251/sdio.c

@@ -43,8 +43,6 @@ struct wl1251_sdio {
 	u32 elp_val;
 };
 
-static struct wl12xx_platform_data *wl12xx_board_data;
-
 static struct sdio_func *wl_to_func(struct wl1251 *wl)
 {
 	struct wl1251_sdio *wl_sdio = wl->if_priv;
@@ -219,30 +217,6 @@ static struct wl1251_if_operations wl1251_sdio_ops = {
 	.power = wl1251_sdio_set_power,
 };
 
-static int wl1251_platform_probe(struct platform_device *pdev)
-{
-	if (pdev->id != -1) {
-		wl1251_error("can only handle single device");
-		return -ENODEV;
-	}
-
-	wl12xx_board_data = pdev->dev.platform_data;
-	return 0;
-}
-
-/*
- * Dummy platform_driver for passing platform_data to this driver,
- * until we have a way to pass this through SDIO subsystem or
- * some other way.
- */
-static struct platform_driver wl1251_platform_driver = {
-	.driver = {
-		.name	= "wl1251_data",
-		.owner	= THIS_MODULE,
-	},
-	.probe	= wl1251_platform_probe,
-};
-
 static int wl1251_sdio_probe(struct sdio_func *func,
 			     const struct sdio_device_id *id)
 {
@@ -250,6 +224,7 @@ static int wl1251_sdio_probe(struct sdio_func *func,
 	struct wl1251 *wl;
 	struct ieee80211_hw *hw;
 	struct wl1251_sdio *wl_sdio;
+	const struct wl12xx_platform_data *wl12xx_board_data;
 
 	hw = wl1251_alloc_hw();
 	if (IS_ERR(hw))
@@ -276,6 +251,7 @@ static int wl1251_sdio_probe(struct sdio_func *func,
 	wl->if_priv = wl_sdio;
 	wl->if_ops = &wl1251_sdio_ops;
 
+	wl12xx_board_data = wl12xx_get_platform_data();
 	if (wl12xx_board_data != NULL) {
 		wl->set_power = wl12xx_board_data->set_power;
 		wl->irq = wl12xx_board_data->irq;
@@ -378,12 +354,6 @@ static int __init wl1251_sdio_init(void)
 {
 	int err;
 
-	err = platform_driver_register(&wl1251_platform_driver);
-	if (err) {
-		wl1251_error("failed to register platform driver: %d", err);
-		return err;
-	}
-
 	err = sdio_register_driver(&wl1251_sdio_driver);
 	if (err)
 		wl1251_error("failed to register sdio driver: %d", err);
@@ -393,7 +363,6 @@ static int __init wl1251_sdio_init(void)
 static void __exit wl1251_sdio_exit(void)
 {
 	sdio_unregister_driver(&wl1251_sdio_driver);
-	platform_driver_unregister(&wl1251_platform_driver);
 	wl1251_notice("unloaded");
 }
 

drivers/net/wireless/wl12xx/Kconfig

@@ -52,5 +52,5 @@ config WL1271_SDIO
 
 config WL12XX_PLATFORM_DATA
 	bool
-	depends on WL1271_SDIO != n
+	depends on WL1271_SDIO != n || WL1251_SDIO != n
 	default y