Merge tag 'tegra-for-4.13-arm64-dt' of...

Merge tag 'tegra-for-4.13-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64

arm64: tegra: Device tree changes for v4.13-rc1

This adds the CCPLEX cluster on Tegra186, which is used to initiate CPU
frequency and voltage transitions.

Also included is a bit of cleanup for PCI related device tree content,
in preparation for a future DTC release that has additional checks for
the PCI bus.

* tag 'tegra-for-4.13-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: dts: nvidia: fix PCI bus dtc warnings
  arm64: tegra: Add CCPLEX_CLUSTER area in Tegra186
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm64/boot/dts/nvidia/tegra132.dtsi

@@ -12,7 +12,7 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	pcie-controller@01003000 {
+	pcie@1003000 {
 		compatible = "nvidia,tegra124-pcie";
 		device_type = "pci";
 		reg = <0x0 0x01003000 0x0 0x00000800   /* PADS registers */
@@ -55,6 +55,7 @@ pci@1,0 {
 			device_type = "pci";
 			assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
 			reg = <0x000800 0 0 0 0>;
+			bus-range = <0x00 0xff>;
 			status = "disabled";
 
 			#address-cells = <3>;
@@ -68,6 +69,7 @@ pci@2,0 {
 			device_type = "pci";
 			assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
 			reg = <0x001000 0 0 0 0>;
+			bus-range = <0x00 0xff>;
 			status = "disabled";
 
 			#address-cells = <3>;

arch/arm64/boot/dts/nvidia/tegra186.dtsi

@@ -348,6 +348,13 @@ pmc@c360000 {
 		reg-names = "pmc", "wake", "aotag", "scratch";
 	};
 
+	ccplex@e000000 {
+		compatible = "nvidia,tegra186-ccplex-cluster";
+		reg = <0x0 0x0e000000 0x0 0x3fffff>;
+
+		nvidia,bpmp = <&bpmp>;
+	};
+
 	gpu@17000000 {
 		compatible = "nvidia,gp10b";
 		reg = <0x0 0x17000000 0x0 0x1000000>,

arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts

@@ -7,7 +7,7 @@ / {
 	model = "NVIDIA Jetson TX1 Developer Kit";
 	compatible = "nvidia,p2371-2180", "nvidia,tegra210";
 
-	pcie-controller@01003000 {
+	pcie@1003000 {
 		status = "okay";
 
 		avdd-pll-uerefe-supply = <&avdd_1v05_pll>;

arch/arm64/boot/dts/nvidia/tegra210.dtsi

@@ -11,7 +11,7 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	pcie-controller@01003000 {
+	pcie@1003000 {
 		compatible = "nvidia,tegra210-pcie";
 		device_type = "pci";
 		reg = <0x0 0x01003000 0x0 0x00000800   /* PADS registers */
@@ -51,6 +51,7 @@ pci@1,0 {
 			device_type = "pci";
 			assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
 			reg = <0x000800 0 0 0 0>;
+			bus-range = <0x00 0xff>;
 			status = "disabled";
 
 			#address-cells = <3>;
@@ -64,6 +65,7 @@ pci@2,0 {
 			device_type = "pci";
 			assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
 			reg = <0x001000 0 0 0 0>;
+			bus-range = <0x00 0xff>;
 			status = "disabled";
 
 			#address-cells = <3>;