Commit e4f44f82 authored by Thomas Abraham's avatar Thomas Abraham Committed by Ben Dooks

ARM: S5P6440: Remove usage of clk_h and add clk_hclk clock

The clk_h clock is of type 'struct clk' whereas on S5P6440,
the hclk is more suitable to be of type 'struct clksrc_clk'
(since hclk clock is divided version of armclk)

This patch modifies the following.

1. Adds the 'clk_hclk' clock which is of type 'struct clksrc_clk'.
2. Removes all references to the clk_h clock.
3. Addes clk_hclk into the list of sysclks.
4. The clock rate 'hclk' is modified to be derived from clk_hclk.
Signed-off-by: default avatarThomas Abraham <thomas.ab@samsung.com>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
parent 9c72d016
......@@ -266,6 +266,15 @@ static struct clksrc_clk clk_dout_mpll = {
.reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 1 },
};
static struct clksrc_clk clk_hclk = {
.clk = {
.name = "clk_hclk",
.id = -1,
.parent = &clk_armclk.clk,
},
.reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 4 },
};
int s5p6440_clk48m_ctrl(struct clk *clk, int enable)
{
unsigned long flags;
......@@ -321,7 +330,7 @@ static struct clk init_clocks_disable[] = {
{
.name = "nand",
.id = -1,
.parent = &clk_h,
.parent = &clk_hclk.clk,
.enable = s5p6440_mem_ctrl,
.ctrlbit = S5P_CLKCON_MEM0_HCLK_NFCON,
}, {
......@@ -580,6 +589,7 @@ static struct clksrc_clk *sysclks[] = {
&clk_mout_mpll,
&clk_dout_mpll,
&clk_armclk,
&clk_hclk,
};
void __init_or_cpufreq s5p6440_setup_clocks(void)
......@@ -628,7 +638,7 @@ void __init_or_cpufreq s5p6440_setup_clocks(void)
print_mhz(apll), print_mhz(mpll), print_mhz(epll));
fclk = clk_get_rate(&clk_armclk.clk);
hclk = fclk / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK);
hclk = clk_get_rate(&clk_hclk.clk);
pclk = hclk / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK);
if (__raw_readl(S5P_OTHERS) & S5P_OTHERS_HCLK_LOW_SEL_MPLL) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment