ARM: sun8i: a83t: Rename pinmux setting names

The pinmux setting nodes all have an address element in their node
names, however the pinctrl node does not have #address-cells.

Rename the existing pinmux setting nodes and labels in sun8i-a83t.dtsi,
dropping identifiers for functions that only have one possible setting,
and using the pingroup name if the function is identically available on
different pingroups.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts

@@ -59,6 +59,6 @@ chosen {
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_b>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };

arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts

@@ -60,6 +60,6 @@ chosen {
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_b>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };

arch/arm/boot/dts/sun8i-a83t.dtsi

@@ -174,7 +174,7 @@ pio: pinctrl@01c20800 {
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
-			mmc0_pins_a: mmc0@0 {
+			mmc0_pins: mmc0_pins {
 				pins = "PF0", "PF1", "PF2",
 				       "PF3", "PF4", "PF5";
 				function = "mmc0";
@@ -182,13 +182,13 @@ mmc0_pins_a: mmc0@0 {
 				bias-pull-up;
 			};
 
-			uart0_pins_a: uart0@0 {
-				pins = "PF2", "PF4";
+			uart0_pb_pins: uart0_pb_pins {
+				pins = "PB9", "PB10";
 				function = "uart0";
 			};
 
-			uart0_pins_b: uart0@1 {
-				pins = "PB9", "PB10";
+			uart0_pf_pins: uart0_pf_pins {
+				pins = "PF2", "PF4";
 				function = "uart0";
 			};
 		};