Commit e5f1b194 authored by Imre Deak's avatar Imre Deak Committed by Linus Torvalds

omap_uwire: SPI_CPHA mode bugfix

The omap_uwire controller driver handles SPI_CPHA incorrectly;
It should mean:

  CPHA=0 ... sample at leading edge of clock
  CPHA=1 ... sample at trailing edge of clock

This bug has been masked by inverse bugs in layered drivers;
and was uncovered by running some of them on non-OMAP hardware.
Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 81fc6323
...@@ -358,11 +358,11 @@ static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t) ...@@ -358,11 +358,11 @@ static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
switch (spi->mode & (SPI_CPOL | SPI_CPHA)) { switch (spi->mode & (SPI_CPOL | SPI_CPHA)) {
case SPI_MODE_0: case SPI_MODE_0:
case SPI_MODE_3: case SPI_MODE_3:
flags |= UWIRE_WRITE_RISING_EDGE | UWIRE_READ_FALLING_EDGE; flags |= UWIRE_WRITE_FALLING_EDGE | UWIRE_READ_RISING_EDGE;
break; break;
case SPI_MODE_1: case SPI_MODE_1:
case SPI_MODE_2: case SPI_MODE_2:
flags |= UWIRE_WRITE_FALLING_EDGE | UWIRE_READ_RISING_EDGE; flags |= UWIRE_WRITE_RISING_EDGE | UWIRE_READ_FALLING_EDGE;
break; break;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment