Commit e626d177 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging

Pull hwmon updates from Jean Delvare:
 "Only trivial things this time"

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: Drop needless includes of <linux/delay.h>
  hwmon: Add missing inclusions of <linux/err.h>
  hwmon: Add missing inclusions of <linux/jiffies.h>
  hwmon: Fix spelling of Celsius
  hwmon: Update Alexey Fisher's name
parents df632d3c 0657777f
......@@ -56,6 +56,6 @@ The junction temperature is calculated:
The junction temperature attribute is supported by the driver.
The battery temperature is calculated:
Degree Celcius = 1 / (t1 + 1/298)- 273
Degree Celsius = 1 / (t1 + 1/298)- 273
where t1 = (1/B)* ln(( ADCval * 2.5)/(R25*ITBAT*255))
Default values of R25, B, ITBAT are 10e3, 3380 and 50e-6 respectively.
......@@ -9,7 +9,7 @@ Supported chips:
http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf
Authors:
Alexey Fisher <fishor@mail.ru>,
Oleksij Rempel <bug-track@fisher-privat.net>,
Jean Delvare <khali@linux-fr.org>
Description
......
......@@ -41,5 +41,5 @@ Channel Signal
The Sysfs nodes will represent the voltage in the units of mV,
the temperature channel shows the converted temperature in
degree celcius. The Battery charging current channel represents
degree Celsius. The Battery charging current channel represents
battery charging current in mA.
......@@ -29,6 +29,7 @@
#include <linux/kdev_t.h>
#include <linux/sched.h>
#include <linux/time.h>
#include <linux/err.h>
#include <acpi/acpi_drivers.h>
#include <acpi/acpi_bus.h>
......
......@@ -50,6 +50,7 @@
#include <linux/hwmon-vid.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/jiffies.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
......
......@@ -15,7 +15,6 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
......
......@@ -26,7 +26,6 @@
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/log2.h>
#include <linux/slab.h>
......
......@@ -20,6 +20,7 @@
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
#include <linux/jiffies.h>
/* Indexes for the sysfs hooks */
......
......@@ -43,6 +43,7 @@
#include <linux/leds.h>
#include <linux/hwmon.h>
#include <linux/workqueue.h>
#include <linux/err.h>
/* data port used by Apple SMC */
#define APPLESMC_DATA_PORT 0x300
......
......@@ -14,6 +14,8 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/dmi.h>
#include <linux/jiffies.h>
#include <linux/err.h>
#include <acpi/acpi.h>
#include <acpi/acpixf.h>
......
......@@ -12,7 +12,6 @@
*
*/
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
......
......@@ -33,6 +33,7 @@
#include <linux/err.h>
#include <linux/sysfs.h>
#include <linux/mutex.h>
#include <linux/jiffies.h>
#define THERMAL_PID_REG 0xfd
#define THERMAL_SMSC_ID_REG 0xfe
......
......@@ -18,7 +18,6 @@
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
......
......@@ -33,6 +33,7 @@
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
/**
* struct hih6130 - HIH-6130 device specific data
......
......@@ -21,12 +21,10 @@
*/
#include <linux/module.h>
#include <linux/jiffies.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/log2.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
......
......@@ -36,6 +36,7 @@
#include <linux/platform_device.h>
#include <linux/math64.h>
#include <linux/time.h>
#include <linux/err.h>
#define REFRESH_INTERVAL (HZ)
#define IPMI_TIMEOUT (30 * HZ)
......
......@@ -26,6 +26,7 @@
#include <linux/jiffies.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/err.h>
#define REFRESH_INTERVAL (2 * HZ)
#define DRVNAME "ibmpex"
......
......@@ -33,6 +33,7 @@
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/jiffies.h>
#include <linux/platform_data/ina2xx.h>
......
......@@ -22,7 +22,6 @@
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
......
......@@ -29,6 +29,7 @@
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/jiffies.h>
/*
* This driver supports various Lineage Compact Power Line DC/DC and AC/DC
......
......@@ -48,6 +48,7 @@
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/jiffies.h>
/*
* The LM92 and MAX6635 have 2 two-state pins for address selection,
......
......@@ -47,6 +47,7 @@
#include <linux/hwmon-vid.h>
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
/* LM93 REGISTER ADDRESSES */
......
......@@ -36,6 +36,7 @@
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/jiffies.h>
/* chip registers */
#define LTC4151_SENSE_H 0x00
......
......@@ -19,6 +19,7 @@
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/jiffies.h>
/* Here are names of the chip's registers (a.k.a. commands) */
enum ltc4215_cmd {
......
......@@ -21,6 +21,7 @@
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/jiffies.h>
#include <linux/i2c/ltc4245.h>
/* Here are names of the chip's registers (a.k.a. commands) */
......
......@@ -33,6 +33,7 @@
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/jiffies.h>
/* chip registers */
#define LTC4261_STATUS 0x00 /* readonly */
......
......@@ -22,7 +22,6 @@
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
enum chips { max16065, max16066, max16067, max16068, max16070, max16071 };
......
/*
* max1619.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring
* Copyright (C) 2003-2004 Alexey Fisher <fishor@mail.ru>
* Copyright (C) 2003-2004 Oleksij Rempel <bug-track@fisher-privat.net>
* Jean Delvare <khali@linux-fr.org>
*
* Based on the lm90 driver. The MAX1619 is a sensor chip made by Maxim.
......@@ -357,7 +357,7 @@ static struct max1619_data *max1619_update_device(struct device *dev)
module_i2c_driver(max1619_driver);
MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and "
MODULE_AUTHOR("Oleksij Rempel <bug-track@fisher-privat.net> and "
"Jean Delvare <khali@linux-fr.org>");
MODULE_DESCRIPTION("MAX1619 sensor driver");
MODULE_LICENSE("GPL");
......@@ -7,7 +7,7 @@
* Derived from:
*
* Based on the max1619 driver.
* Copyright (C) 2003-2004 Alexey Fisher <fishor@mail.ru>
* Copyright (C) 2003-2004 Oleksij Rempel <bug-track@fisher-privat.net>
* Jean Delvare <khali@linux-fr.org>
*
* The MAX6642 is a sensor chip made by Maxim.
......
......@@ -26,7 +26,7 @@
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <linux/i2c/pmbus.h>
#include "pmbus.h"
......
......@@ -22,7 +22,6 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/init.h>
#include <linux/err.h>
......
......@@ -29,6 +29,7 @@
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/jiffies.h>
/* I2C command bytes */
#define SHT21_TRIG_T_MEASUREMENT_HM 0xe3
......
......@@ -24,6 +24,7 @@
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
/* Internal reference voltage (VREF, x 1000 */
#define SMM665_VREF_ADC_X1000 1250
......
......@@ -28,6 +28,7 @@
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/jiffies.h>
MODULE_LICENSE("GPL");
......
......@@ -26,6 +26,7 @@
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/jiffies.h>
#define DRIVER_NAME "tmp102"
......
......@@ -12,6 +12,7 @@
#include <linux/io.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#define DRV_MODULE_VERSION "0.1"
......
......@@ -41,6 +41,7 @@
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/jiffies.h>
#define NUMBER_OF_VIN 10
#define NUMBER_OF_FANIN 5
......
......@@ -44,6 +44,7 @@
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
#include <linux/jiffies.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
......
......@@ -46,6 +46,7 @@
#include <linux/kref.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/jiffies.h>
/* Default values */
#define WATCHDOG_TIMEOUT 2 /* 2 minute default timeout */
......
......@@ -34,7 +34,7 @@
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = {
......
......@@ -33,6 +33,7 @@
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/jiffies.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x2e, 0x2f, I2C_CLIENT_END };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment