Merge branch 'omap/dt-missed-3.4' into drivers/mmc

The omap/dt branch adds a few instances of mmc device nodes that
need to get changed to use the common bindings. Pull that into
a new branch so we can apply the patch in a single run.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/omap3-beagle.dts

@@ -18,3 +18,52 @@ memory {
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
 };
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		vsim: regulator@10 {
+			compatible = "ti,twl4030-vsim";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+	};
+};
+
+/include/ "twl4030.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+
+	/*
+	 * Display monitor features are burnt in the EEPROM
+	 * as EDID data.
+	 */
+	eeprom@50 {
+		compatible = "ti,eeprom";
+		reg = <0x50>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	ti,bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disable";
+};
+
+&mmc3 {
+	status = "disable";
+};

arch/arm/boot/dts/omap3.dtsi

@@ -69,6 +69,60 @@ intc: interrupt-controller@48200000 {
 			reg = <0x48200000 0x1000>;
 		};
 
+		gpio1: gpio@48310000 {
+			compatible = "ti,omap3-gpio";
+			ti,hwmods = "gpio1";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio2: gpio@49050000 {
+			compatible = "ti,omap3-gpio";
+			ti,hwmods = "gpio2";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio3: gpio@49052000 {
+			compatible = "ti,omap3-gpio";
+			ti,hwmods = "gpio3";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio4: gpio@49054000 {
+			compatible = "ti,omap3-gpio";
+			ti,hwmods = "gpio4";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio5: gpio@49056000 {
+			compatible = "ti,omap3-gpio";
+			ti,hwmods = "gpio5";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio6: gpio@49058000 {
+			compatible = "ti,omap3-gpio";
+			ti,hwmods = "gpio6";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
 		uart1: serial@4806a000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart1";
@@ -113,5 +167,53 @@ i2c3: i2c@48060000 {
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
 		};
+
+		mcspi1: spi@48098000 {
+			compatible = "ti,omap2-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi1";
+			ti,spi-num-cs = <4>;
+		};
+
+		mcspi2: spi@4809a000 {
+			compatible = "ti,omap2-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi2";
+			ti,spi-num-cs = <2>;
+		};
+
+		mcspi3: spi@480b8000 {
+			compatible = "ti,omap2-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi3";
+			ti,spi-num-cs = <2>;
+		};
+
+		mcspi4: spi@480ba000 {
+			compatible = "ti,omap2-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi4";
+			ti,spi-num-cs = <1>;
+		};
+
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap3-hsmmc";
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap3-hsmmc";
+			ti,hwmods = "mmc2";
+		};
+
+		mmc3: mmc@480ad000 {
+			compatible = "ti,omap3-hsmmc";
+			ti,hwmods = "mmc3";
+		};
 	};
 };

arch/arm/boot/dts/omap4-panda.dts

@@ -18,3 +18,59 @@ memory {
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 };
+
+&i2c1 {
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+		interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
+		interrupt-parent = <&gic>;
+	};
+};
+
+/include/ "twl6030.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+
+	/*
+	 * Display monitor features are burnt in their EEPROM as EDID data.
+	 * The EEPROM is connected as I2C slave device.
+	 */
+	eeprom@50 {
+		compatible = "ti,eeprom";
+		reg = <0x50>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc>;
+	ti,bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disable";
+};
+
+&mmc3 {
+	status = "disable";
+};
+
+&mmc4 {
+	status = "disable";
+};
+
+&mmc5 {
+	ti,non-removable;
+	ti,bus-width = <4>;
+};

arch/arm/boot/dts/omap4-sdp.dts

@@ -17,4 +17,101 @@ memory {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
+
+	vdd_eth: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_ETH";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 16 0>;  /* gpio line 48 */
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+		interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
+		interrupt-parent = <&gic>;
+	};
+};
+
+/include/ "twl6030.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	/*
+	 * Temperature Sensor
+	 * http://www.ti.com/lit/ds/symlink/tmp105.pdf
+	 */
+	tmp105@48 {
+		compatible = "ti,tmp105";
+		reg = <0x48>;
+	};
+
+	/*
+	 * Ambient Light Sensor
+	 * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
+	 */
+	bh1780@29 {
+		compatible = "rohm,bh1780";
+		reg = <0x29>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	/*
+	 * 3-Axis Digital Compass
+	 * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
+	 */
+	hmc5843@1e {
+		compatible = "honeywell,hmc5843";
+		reg = <0x1e>;
+	};
+};
+
+&mcspi1 {
+	eth@0 {
+		compatible = "ks8851";
+		spi-max-frequency = <24000000>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <2>; /* gpio line 34 */
+		vdd-supply = <&vdd_eth>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc>;
+	ti,bus-width = <8>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vaux1>;
+	ti,bus-width = <8>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	status = "disable";
+};
+
+&mmc4 {
+	status = "disable";
+};
+
+&mmc5 {
+	ti,bus-width = <4>;
+	ti,non-removable;
 };

arch/arm/boot/dts/omap4.dtsi

@@ -104,6 +104,60 @@ gic: interrupt-controller@48241000 {
 			      <0x48240100 0x0100>;
 		};
 
+		gpio1: gpio@4a310000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio1";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio2: gpio@48055000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio2";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio3: gpio@48057000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio3";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio4: gpio@48059000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio4";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio5: gpio@4805b000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio5";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio6: gpio@4805d000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio6";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
 		uart1: serial@4806a000 {
 			compatible = "ti,omap4-uart";
 			ti,hwmods = "uart1";
@@ -155,5 +209,68 @@ i2c4: i2c@48350000 {
 			#size-cells = <0>;
 			ti,hwmods = "i2c4";
 		};
+
+		mcspi1: spi@48098000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi1";
+			ti,spi-num-cs = <4>;
+		};
+
+		mcspi2: spi@4809a000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi2";
+			ti,spi-num-cs = <2>;
+		};
+
+		mcspi3: spi@480b8000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi3";
+			ti,spi-num-cs = <2>;
+		};
+
+		mcspi4: spi@480ba000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi4";
+			ti,spi-num-cs = <1>;
+		};
+
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+		};
+
+		mmc3: mmc@480ad000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+		};
+
+		mmc4: mmc@480d1000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc4";
+			ti,needs-special-reset;
+		};
+
+		mmc5: mmc@480d5000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc5";
+			ti,needs-special-reset;
+		};
 	};
 };

arch/arm/boot/dts/twl4030.dtsi

+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ */
+&twl {
+	compatible = "ti,twl4030";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	rtc {
+		compatible = "ti,twl4030-rtc";
+		interrupts = <11>;
+	};
+
+	vdac: regulator@0 {
+		compatible = "ti,twl4030-vdac";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vpll2: regulator@1 {
+		compatible = "ti,twl4030-vpll2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vmmc1: regulator@2 {
+		compatible = "ti,twl4030-vmmc1";
+		regulator-min-microvolt = <1850000>;
+		regulator-max-microvolt = <3150000>;
+	};
+};

arch/arm/boot/dts/twl6030.dtsi

+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/twl6030.pdf
+ */
+&twl {
+	compatible = "ti,twl6030";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	rtc {
+		compatible = "ti,twl4030-rtc";
+		interrupts = <11>;
+	};
+
+	vaux1: regulator@0 {
+		compatible = "ti,twl6030-vaux1";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	vaux2: regulator@1 {
+		compatible = "ti,twl6030-vaux2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	vaux3: regulator@2 {
+		compatible = "ti,twl6030-vaux3";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	vmmc: regulator@3 {
+		compatible = "ti,twl6030-vmmc";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	vpp: regulator@4 {
+		compatible = "ti,twl6030-vpp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	vusim: regulator@5 {
+		compatible = "ti,twl6030-vusim";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <2900000>;
+	};
+
+	vdac: regulator@6 {
+		compatible = "ti,twl6030-vdac";
+	};
+
+	vana: regulator@7 {
+		compatible = "ti,twl6030-vana";
+	};
+
+	vcxio: regulator@8 {
+		compatible = "ti,twl6030-vcxio";
+	};
+
+	vusb: regulator@9 {
+		compatible = "ti,twl6030-vusb";
+	};
+
+	v1v8: regulator@10 {
+		compatible = "ti,twl6030-v1v8";
+	};
+
+	v2v1: regulator@11 {
+		compatible = "ti,twl6030-v2v1";
+	};
+
+	clk32kg: regulator@12 {
+		compatible = "ti,twl6030-clk32kg";
+	};
+};

arch/arm/mach-omap2/board-generic.c

@@ -15,7 +15,6 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>
-#include <linux/i2c/twl.h>
 
 #include <mach/hardware.h>
 #include <asm/hardware/gic.h>
@@ -95,22 +94,6 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_ARCH_OMAP3
-static struct twl4030_platform_data beagle_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-};
-
-static void __init omap3_i2c_init(void)
-{
-	omap3_pmic_init("twl4030", &beagle_twldata);
-}
-
-static void __init omap3_init(void)
-{
-	omap3_i2c_init();
-	omap_generic_init();
-}
-
 static const char *omap3_boards_compat[] __initdata = {
 	"ti,omap3",
 	NULL,
@@ -122,7 +105,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
 	.init_early	= omap3430_init_early,
 	.init_irq	= omap_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap3_init,
+	.init_machine	= omap_generic_init,
 	.timer		= &omap3_timer,
 	.dt_compat	= omap3_boards_compat,
 	.restart	= omap_prcm_restart,
@@ -130,22 +113,6 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_ARCH_OMAP4
-static struct twl4030_platform_data sdp4430_twldata = {
-	.irq_base	= TWL6030_IRQ_BASE,
-	.irq_end	= TWL6030_IRQ_END,
-};
-
-static void __init omap4_i2c_init(void)
-{
-	omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0);
-}
-
-static void __init omap4_init(void)
-{
-	omap4_i2c_init();
-	omap_generic_init();
-}
-
 static const char *omap4_boards_compat[] __initdata = {
 	"ti,omap4",
 	NULL,
@@ -157,7 +124,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
 	.init_early	= omap4430_init_early,
 	.init_irq	= omap_init_irq,
 	.handle_irq	= gic_handle_irq,
-	.init_machine	= omap4_init,
+	.init_machine	= omap_generic_init,
 	.timer		= &omap4_timer,
 	.dt_compat	= omap4_boards_compat,
 	.restart	= omap_prcm_restart,

arch/arm/mach-omap2/devices.c

@@ -705,7 +705,9 @@ static int __init omap2_init_devices(void)
 	omap_init_dmic();
 	omap_init_camera();
 	omap_init_mbox();
-	omap_init_mcspi();
+	/* If dtb is there, the devices will be created dynamically */
+	if (!of_have_populated_dt())
+		omap_init_mcspi();
 	omap_init_pmu();
 	omap_hdq_init();
 	omap_init_sti();

arch/arm/mach-omap2/gpio.c

@@ -20,6 +20,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
+#include <linux/of.h>
 
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
@@ -146,7 +147,10 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
  */
 static int __init omap2_gpio_init(void)
 {
-	return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init,
-						NULL);
+	/* If dtb is there, the devices will be created dynamically */
+	if (of_have_populated_dt())
+		return -ENODEV;
+
+	return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init, NULL);
 }
 postcore_initcall(omap2_gpio_init);