ARM: dts: rockchip: clean up the abuse of disable-wp

The mmc.txt didn't explicitly say disable-wp is for SD card slot
only, but that is what it was designed for in the first place.

Remove all disable-wp from emmc or sdio controller.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

arch/arm/boot/dts/rk3066a-bqcurie2.dts

@@ -171,7 +171,6 @@ &mmc1 { /* wifi */
 	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
 
 	bus-width = <4>;
-	disable-wp;
 };
 
 &pwm3 {

arch/arm/boot/dts/rk3066a-mk808.dts

@@ -101,7 +101,6 @@ &mmc0 {
 
 &mmc1 {
 	bus-width = <4>;
-	disable-wp;
 	non-removable;
 	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
 	pinctrl-names = "default";

arch/arm/boot/dts/rk3066a-rayeager.dts

@@ -147,7 +147,6 @@ phy0: ethernet-phy@0 {
 &emmc {
 	bus-width = <8>;
 	cap-mmc-highspeed;
-	disable-wp;
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
@@ -309,7 +308,6 @@ &mmc0 {
 
 &mmc1 {
 	bus-width = <4>;
-	disable-wp;
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;

arch/arm/boot/dts/rk3188-bqedison2qc.dts

@@ -227,7 +227,6 @@ &cru {
 &emmc {
 	bus-width = <8>;
 	cap-mmc-highspeed;
-	disable-wp;
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk &emmc_cmd>;

arch/arm/boot/dts/rk3188-px3-evb.dts

@@ -62,7 +62,6 @@ &cpu3 {
 &emmc {
 	bus-width = <8>;
 	cap-mmc-highspeed;
-	disable-wp;
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;

arch/arm/boot/dts/rk3229-evb.dts

@@ -137,7 +137,6 @@ &cpu3 {
 
 &emmc {
 	cap-mmc-highspeed;
-	disable-wp;
 	non-removable;
 	status = "okay";
 };

arch/arm/boot/dts/rk3288-fennec.dts

@@ -37,7 +37,6 @@ &cpu0 {
 &emmc {
 	bus-width = <8>;
 	cap-mmc-highspeed;
-	disable-wp;
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;

arch/arm/boot/dts/rk3288-firefly-reload.dts

@@ -254,7 +254,6 @@ &sdio0 {
 	bus-width = <4>;
 	cap-sd-highspeed;
 	cap-sdio-irq;
-	disable-wp;
 	mmc-pwrseq = <&sdio_pwrseq>;
 	non-removable;
 	pinctrl-names = "default";

arch/arm/boot/dts/rk3288-miqi.dts

@@ -87,7 +87,6 @@ &cpu0 {
 &emmc {
 	bus-width = <8>;
 	cap-mmc-highspeed;
-	disable-wp;
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;

arch/arm/boot/dts/rk3288-popmetal.dts

@@ -109,7 +109,6 @@ &cpu0 {
 &emmc {
 	bus-width = <8>;
 	cap-mmc-highspeed;
-	disable-wp;
 	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	non-removable;

arch/arm/boot/dts/rk3288-rock2-square.dts

@@ -133,7 +133,6 @@ &sdio0 {
 	bus-width = <4>;
 	cap-sd-highspeed;
 	cap-sdio-irq;
-	disable-wp;
 	mmc-pwrseq = <&sdio_pwrseq>;
 	non-removable;
 	pinctrl-names = "default";

arch/arm/boot/dts/rk3288-tinker-s.dts

@@ -15,7 +15,6 @@ / {
 &emmc {
 	bus-width = <8>;
 	cap-mmc-highspeed;
-	disable-wp;
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;

arch/arm/boot/dts/rk3288-vyasa.dts

@@ -121,7 +121,6 @@ &cpu0 {
 &emmc {
 	bus-width = <8>;
 	cap-mmc-highspeed;
-	disable-wp;
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;