Commit e712d52b authored by Yuval Mintz's avatar Yuval Mintz Committed by David S. Miller

qede: Add basic Network driver

The Qlogic Everest Driver for Ethernet is the Ethernet specific module for
QL4xxx ethernet products by Qlogic.

This patch adds a very minimal PCI driver, one that doesn't yet register
a network device, but one that does interact with qed and does a basic
initialization of the HW.
Signed-off-by: default avatarYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: default avatarAriel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 25c089d7
...@@ -97,4 +97,9 @@ config QED ...@@ -97,4 +97,9 @@ config QED
---help--- ---help---
This enables the support for ... This enables the support for ...
config QEDE
tristate "QLogic QED 25/40/100Gb Ethernet NIC"
depends on QED
---help---
This enables the support for ...
endif # NET_VENDOR_QLOGIC endif # NET_VENDOR_QLOGIC
...@@ -7,3 +7,4 @@ obj-$(CONFIG_QLCNIC) += qlcnic/ ...@@ -7,3 +7,4 @@ obj-$(CONFIG_QLCNIC) += qlcnic/
obj-$(CONFIG_QLGE) += qlge/ obj-$(CONFIG_QLGE) += qlge/
obj-$(CONFIG_NETXEN_NIC) += netxen/ obj-$(CONFIG_NETXEN_NIC) += netxen/
obj-$(CONFIG_QED) += qed/ obj-$(CONFIG_QED) += qed/
obj-$(CONFIG_QEDE)+= qede/
obj-$(CONFIG_QEDE) := qede.o
qede-y := qede_main.o
/* QLogic qede NIC Driver
* Copyright (c) 2015 QLogic Corporation
*
* This software is available under the terms of the GNU General Public License
* (GPL) Version 2, available from the file COPYING in the main directory of
* this source tree.
*/
#ifndef _QEDE_H_
#define _QEDE_H_
#include <linux/compiler.h>
#include <linux/version.h>
#include <linux/workqueue.h>
#include <linux/netdevice.h>
#include <linux/interrupt.h>
#include <linux/bitmap.h>
#include <linux/kernel.h>
#include <linux/mutex.h>
#include <linux/io.h>
#include <linux/qed/common_hsi.h>
#include <linux/qed/eth_common.h>
#include <linux/qed/qed_if.h>
#include <linux/qed/qed_chain.h>
#include <linux/qed/qed_eth_if.h>
#define QEDE_MAJOR_VERSION 8
#define QEDE_MINOR_VERSION 4
#define QEDE_REVISION_VERSION 0
#define QEDE_ENGINEERING_VERSION 0
#define DRV_MODULE_VERSION __stringify(QEDE_MAJOR_VERSION) "." \
__stringify(QEDE_MINOR_VERSION) "." \
__stringify(QEDE_REVISION_VERSION) "." \
__stringify(QEDE_ENGINEERING_VERSION)
#define QEDE_ETH_INTERFACE_VERSION 300
#define DRV_MODULE_SYM qede
struct qede_dev {
struct qed_dev *cdev;
struct net_device *ndev;
struct pci_dev *pdev;
u32 dp_module;
u8 dp_level;
const struct qed_eth_ops *ops;
struct qed_dev_eth_info dev_info;
#define QEDE_MAX_RSS_CNT(edev) ((edev)->dev_info.num_queues)
#define QEDE_MAX_TSS_CNT(edev) ((edev)->dev_info.num_queues * \
(edev)->dev_info.num_tc)
u16 num_rss;
u8 num_tc;
#define QEDE_RSS_CNT(edev) ((edev)->num_rss)
#define QEDE_TSS_CNT(edev) ((edev)->num_rss * \
(edev)->num_tc)
#define QEDE_TSS_IDX(edev, txqidx) ((txqidx) % (edev)->num_rss)
#define QEDE_TC_IDX(edev, txqidx) ((txqidx) / (edev)->num_rss)
struct qed_int_info int_info;
unsigned char primary_mac[ETH_ALEN];
/* Smaller private varaiant of the RTNL lock */
struct mutex qede_lock;
u32 state; /* Protected by qede_lock */
};
/* Debug print definitions */
#define DP_NAME(edev) ((edev)->ndev->name)
#endif /* _QEDE_H_ */
/* QLogic qede NIC Driver
* Copyright (c) 2015 QLogic Corporation
*
* This software is available under the terms of the GNU General Public License
* (GPL) Version 2, available from the file COPYING in the main directory of
* this source tree.
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/version.h>
#include <linux/device.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/errno.h>
#include <linux/list.h>
#include <linux/string.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <asm/byteorder.h>
#include <asm/param.h>
#include <linux/io.h>
#include <linux/netdev_features.h>
#include <linux/udp.h>
#include <linux/tcp.h>
#include <net/vxlan.h>
#include <linux/ip.h>
#include <net/ipv6.h>
#include <net/tcp.h>
#include <linux/if_ether.h>
#include <linux/if_vlan.h>
#include <linux/pkt_sched.h>
#include <linux/ethtool.h>
#include <linux/in.h>
#include <linux/random.h>
#include <net/ip6_checksum.h>
#include <linux/bitops.h>
#include "qede.h"
static const char version[] = "QLogic QL4xxx 40G/100G Ethernet Driver qede "
DRV_MODULE_VERSION "\n";
MODULE_DESCRIPTION("QLogic 40G/100G Ethernet Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_MODULE_VERSION);
static uint debug;
module_param(debug, uint, 0);
MODULE_PARM_DESC(debug, " Default debug msglevel");
static const struct qed_eth_ops *qed_ops;
#define CHIP_NUM_57980S_40 0x1634
#define CHIP_NUM_57980S_10 0x1635
#define CHIP_NUM_57980S_MF 0x1636
#define CHIP_NUM_57980S_100 0x1644
#define CHIP_NUM_57980S_50 0x1654
#define CHIP_NUM_57980S_25 0x1656
#ifndef PCI_DEVICE_ID_NX2_57980E
#define PCI_DEVICE_ID_57980S_40 CHIP_NUM_57980S_40
#define PCI_DEVICE_ID_57980S_10 CHIP_NUM_57980S_10
#define PCI_DEVICE_ID_57980S_MF CHIP_NUM_57980S_MF
#define PCI_DEVICE_ID_57980S_100 CHIP_NUM_57980S_100
#define PCI_DEVICE_ID_57980S_50 CHIP_NUM_57980S_50
#define PCI_DEVICE_ID_57980S_25 CHIP_NUM_57980S_25
#endif
static const struct pci_device_id qede_pci_tbl[] = {
{ PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_40), 0 },
{ PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_10), 0 },
{ PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_MF), 0 },
{ PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_100), 0 },
{ PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_50), 0 },
{ PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_25), 0 },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, qede_pci_tbl);
static int qede_probe(struct pci_dev *pdev, const struct pci_device_id *id);
#define TX_TIMEOUT (5 * HZ)
static void qede_remove(struct pci_dev *pdev);
static struct pci_driver qede_pci_driver = {
.name = "qede",
.id_table = qede_pci_tbl,
.probe = qede_probe,
.remove = qede_remove,
};
static
int __init qede_init(void)
{
int ret;
u32 qed_ver;
pr_notice("qede_init: %s\n", version);
qed_ver = qed_get_protocol_version(QED_PROTOCOL_ETH);
if (qed_ver != QEDE_ETH_INTERFACE_VERSION) {
pr_notice("Version mismatch [%08x != %08x]\n",
qed_ver,
QEDE_ETH_INTERFACE_VERSION);
return -EINVAL;
}
qed_ops = qed_get_eth_ops(QEDE_ETH_INTERFACE_VERSION);
if (!qed_ops) {
pr_notice("Failed to get qed ethtool operations\n");
return -EINVAL;
}
ret = pci_register_driver(&qede_pci_driver);
if (ret) {
pr_notice("Failed to register driver\n");
qed_put_eth_ops();
return -EINVAL;
}
return 0;
}
static void __exit qede_cleanup(void)
{
pr_notice("qede_cleanup called\n");
pci_unregister_driver(&qede_pci_driver);
qed_put_eth_ops();
}
module_init(qede_init);
module_exit(qede_cleanup);
/* -------------------------------------------------------------------------
* START OF PROBE / REMOVE
* -------------------------------------------------------------------------
*/
static struct qede_dev *qede_alloc_etherdev(struct qed_dev *cdev,
struct pci_dev *pdev,
struct qed_dev_eth_info *info,
u32 dp_module,
u8 dp_level)
{
struct net_device *ndev;
struct qede_dev *edev;
ndev = alloc_etherdev_mqs(sizeof(*edev),
info->num_queues,
info->num_queues);
if (!ndev) {
pr_err("etherdev allocation failed\n");
return NULL;
}
edev = netdev_priv(ndev);
edev->ndev = ndev;
edev->cdev = cdev;
edev->pdev = pdev;
edev->dp_module = dp_module;
edev->dp_level = dp_level;
edev->ops = qed_ops;
DP_INFO(edev, "Allocated netdev with 64 tx queues and 64 rx queues\n");
SET_NETDEV_DEV(ndev, &pdev->dev);
memcpy(&edev->dev_info, info, sizeof(*info));
edev->num_tc = edev->dev_info.num_tc;
return edev;
}
static void qede_init_ndev(struct qede_dev *edev)
{
struct net_device *ndev = edev->ndev;
struct pci_dev *pdev = edev->pdev;
u32 hw_features;
pci_set_drvdata(pdev, ndev);
ndev->mem_start = edev->dev_info.common.pci_mem_start;
ndev->base_addr = ndev->mem_start;
ndev->mem_end = edev->dev_info.common.pci_mem_end;
ndev->irq = edev->dev_info.common.pci_irq;
ndev->watchdog_timeo = TX_TIMEOUT;
/* user-changeble features */
hw_features = NETIF_F_GRO | NETIF_F_SG |
NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
NETIF_F_TSO | NETIF_F_TSO6;
ndev->vlan_features = hw_features | NETIF_F_RXHASH | NETIF_F_RXCSUM |
NETIF_F_HIGHDMA;
ndev->features = hw_features | NETIF_F_RXHASH | NETIF_F_RXCSUM |
NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HIGHDMA |
NETIF_F_HW_VLAN_CTAG_TX;
ndev->hw_features = hw_features;
/* Set network device HW mac */
ether_addr_copy(edev->ndev->dev_addr, edev->dev_info.common.hw_mac);
}
/* This function converts from 32b param to two params of level and module
* Input 32b decoding:
* b31 - enable all NOTICE prints. NOTICE prints are for deviation from the
* 'happy' flow, e.g. memory allocation failed.
* b30 - enable all INFO prints. INFO prints are for major steps in the flow
* and provide important parameters.
* b29-b0 - per-module bitmap, where each bit enables VERBOSE prints of that
* module. VERBOSE prints are for tracking the specific flow in low level.
*
* Notice that the level should be that of the lowest required logs.
*/
static void qede_config_debug(uint debug, u32 *p_dp_module, u8 *p_dp_level)
{
*p_dp_level = QED_LEVEL_NOTICE;
*p_dp_module = 0;
if (debug & QED_LOG_VERBOSE_MASK) {
*p_dp_level = QED_LEVEL_VERBOSE;
*p_dp_module = (debug & 0x3FFFFFFF);
} else if (debug & QED_LOG_INFO_MASK) {
*p_dp_level = QED_LEVEL_INFO;
} else if (debug & QED_LOG_NOTICE_MASK) {
*p_dp_level = QED_LEVEL_NOTICE;
}
}
static void qede_update_pf_params(struct qed_dev *cdev)
{
struct qed_pf_params pf_params;
/* 16 rx + 16 tx */
memset(&pf_params, 0, sizeof(struct qed_pf_params));
pf_params.eth_pf_params.num_cons = 32;
qed_ops->common->update_pf_params(cdev, &pf_params);
}
enum qede_probe_mode {
QEDE_PROBE_NORMAL,
};
static int __qede_probe(struct pci_dev *pdev, u32 dp_module, u8 dp_level,
enum qede_probe_mode mode)
{
struct qed_slowpath_params params;
struct qed_dev_eth_info dev_info;
struct qede_dev *edev;
struct qed_dev *cdev;
int rc;
if (unlikely(dp_level & QED_LEVEL_INFO))
pr_notice("Starting qede probe\n");
cdev = qed_ops->common->probe(pdev, QED_PROTOCOL_ETH,
dp_module, dp_level);
if (!cdev) {
rc = -ENODEV;
goto err0;
}
qede_update_pf_params(cdev);
/* Start the Slowpath-process */
memset(&params, 0, sizeof(struct qed_slowpath_params));
params.int_mode = QED_INT_MODE_MSIX;
params.drv_major = QEDE_MAJOR_VERSION;
params.drv_minor = QEDE_MINOR_VERSION;
params.drv_rev = QEDE_REVISION_VERSION;
params.drv_eng = QEDE_ENGINEERING_VERSION;
strlcpy(params.name, "qede LAN", QED_DRV_VER_STR_SIZE);
rc = qed_ops->common->slowpath_start(cdev, &params);
if (rc) {
pr_notice("Cannot start slowpath\n");
goto err1;
}
/* Learn information crucial for qede to progress */
rc = qed_ops->fill_dev_info(cdev, &dev_info);
if (rc)
goto err2;
edev = qede_alloc_etherdev(cdev, pdev, &dev_info, dp_module,
dp_level);
if (!edev) {
rc = -ENOMEM;
goto err2;
}
qede_init_ndev(edev);
edev->ops->common->set_id(cdev, edev->ndev->name, DRV_MODULE_VERSION);
DP_INFO(edev, "Ending successfully qede probe\n");
return 0;
err2:
qed_ops->common->slowpath_stop(cdev);
err1:
qed_ops->common->remove(cdev);
err0:
return rc;
}
static int qede_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
u32 dp_module = 0;
u8 dp_level = 0;
qede_config_debug(debug, &dp_module, &dp_level);
return __qede_probe(pdev, dp_module, dp_level,
QEDE_PROBE_NORMAL);
}
enum qede_remove_mode {
QEDE_REMOVE_NORMAL,
};
static void __qede_remove(struct pci_dev *pdev, enum qede_remove_mode mode)
{
struct net_device *ndev = pci_get_drvdata(pdev);
struct qede_dev *edev = netdev_priv(ndev);
struct qed_dev *cdev = edev->cdev;
DP_INFO(edev, "Starting qede_remove\n");
edev->ops->common->set_power_state(cdev, PCI_D0);
pci_set_drvdata(pdev, NULL);
free_netdev(ndev);
/* Use global ops since we've freed edev */
qed_ops->common->slowpath_stop(cdev);
qed_ops->common->remove(cdev);
pr_notice("Ending successfully qede_remove\n");
}
static void qede_remove(struct pci_dev *pdev)
{
__qede_remove(pdev, QEDE_REMOVE_NORMAL);
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment