[PATCH] I2C: move the i2c-philips-par driver to drivers/i2c/busses

drivers/i2c/Kconfig

@@ -48,16 +48,6 @@ config I2C_ALGOBIT
 	  This support is also available as a module.  If so, the module 
 	  will be called i2c-algo-bit.
 
-config I2C_PHILIPSPAR
-	tristate "Philips style parallel port adapter"
-	depends on I2C_ALGOBIT && PARPORT
-	---help---
-	  This supports parallel-port I2C adapters made by Philips.  Say Y if
-	  you own such an adapter.
-
-	  This support is also available as a module.  If so, the module 
-	  will be called i2c-philips-par.
-
 config I2C_ELV
 	tristate "ELV adapter"
 	depends on I2C_ALGOBIT && ISA

drivers/i2c/Makefile

@@ -5,7 +5,6 @@
 obj-$(CONFIG_I2C)		+= i2c-core.o
 obj-$(CONFIG_I2C_CHARDEV)	+= i2c-dev.o
 obj-$(CONFIG_I2C_ALGOBIT)	+= i2c-algo-bit.o
-obj-$(CONFIG_I2C_PHILIPSPAR)	+= i2c-philips-par.o
 obj-$(CONFIG_I2C_ELV)		+= i2c-elv.o
 obj-$(CONFIG_I2C_VELLEMAN)	+= i2c-velleman.o
 obj-$(CONFIG_I2C_ALGOPCF)	+= i2c-algo-pcf.o

drivers/i2c/busses/Kconfig

@@ -97,6 +97,15 @@ config I2C_NFORCE2
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-nforce2.
 
+config I2C_PHILIPSPAR
+	tristate "Philips style parallel port adapter"
+	depends on I2C_ALGOBIT && PARPORT
+	help
+	  This supports parallel-port I2C adapters made by Philips.
+
+	  This support is also available as a module.  If so, the module 
+	  will be called i2c-philips-par.
+
 config I2C_PIIX4
 	tristate "Intel PIIX4"
 	depends on I2C && PCI && EXPERIMENTAL

drivers/i2c/busses/Makefile

@@ -10,6 +10,7 @@ obj-$(CONFIG_I2C_I801)		+= i2c-i801.o
 obj-$(CONFIG_I2C_I810)		+= i2c-i810.o
 obj-$(CONFIG_I2C_ISA)		+= i2c-isa.o
 obj-$(CONFIG_I2C_NFORCE2)	+= i2c-nforce2.o
+obj-$(CONFIG_I2C_PHILIPSPAR)	+= i2c-philips-par.o
 obj-$(CONFIG_I2C_PIIX4)		+= i2c-piix4.o
 obj-$(CONFIG_I2C_PROSAVAGE)	+= i2c-prosavage.o
 obj-$(CONFIG_I2C_SAVAGE4)	+= i2c-savage4.o