Merge tag 'spi-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "This release is almost entirely driver changes, there's a couple of
  fixes in the core but otherwise it's all drivers:

   - fix for mixed dynamic and static bus number assignment.

   - fixes for some leaks arising from confusing lifetime rules during
     device unregistration and improved documentation to try to help
     avoid this in the future.

   - fixes to make the native chip select support for i.MX usable.

   - slave mode support for i.MX.

   - support for Coldfire MCF5441x DSPI, Renesas R8A7443/5 and
     Spreadtrum ADI"

* tag 'spi-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (31 commits)
  spi: imx: Don't require platform data chipselect array
  spi: imx: Fix failure path leak on GPIO request error
  spi: imx: GPIO based chip selects should not be required
  spi: sh-msiof: remove redundant pointer dev
  spi: s3c64xx: remove redundant pointer sci
  spi: spi-fsl-dspi: enabling Coldfire mcf5441x dspi
  spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers
  spi: orion: remove redundant assignment of status to zero
  spi: sh-msiof: Fix DMA transfer size check
  spi: imx: Fix failure path leak on GPIO request error
  spi: spi-axi: fix potential use-after-free after deregistration
  spi: document odd controller reference handling
  spi: fix use-after-free at controller deregistration
  spi: sprd: Fix the possible negative value of BIT()
  spi: sprd-adi: fix platform_no_drv_owner.cocci warnings
  spi: a3700: Change SPI mode before asserting chip-select
  spi: tegra114: correct register name in definition
  spi: spreadtrum adi: add hwspinlock dependency
  spi: sh-msiof: Use of_device_get_match_data() helper
  spi: rspi: Use of_device_get_match_data() helper
  ...

Documentation/devicetree/bindings/spi/sh-msiof.txt

 Renesas MSIOF spi controller
 
 Required properties:
-- compatible           : "renesas,msiof-r8a7790" (R-Car H2)
+- compatible           : "renesas,msiof-r8a7743" (RZ/G1M)
+			 "renesas,msiof-r8a7745" (RZ/G1E)
+			 "renesas,msiof-r8a7790" (R-Car H2)
 			 "renesas,msiof-r8a7791" (R-Car M2-W)
 			 "renesas,msiof-r8a7792" (R-Car V2H)
 			 "renesas,msiof-r8a7793" (R-Car M2-N)
@@ -10,7 +12,7 @@ Required properties:
 			 "renesas,msiof-r8a7796" (R-Car M3-W)
 			 "renesas,msiof-sh73a0" (SH-Mobile AG5)
 			 "renesas,sh-mobile-msiof" (generic SH-Mobile compatibile device)
-			 "renesas,rcar-gen2-msiof" (generic R-Car Gen2 compatible device)
+			 "renesas,rcar-gen2-msiof" (generic R-Car Gen2 and RZ/G1 compatible device)
 			 "renesas,rcar-gen3-msiof" (generic R-Car Gen3 compatible device)
 			 "renesas,sh-msiof"      (deprecated)
 

Documentation/devicetree/bindings/spi/spi-davinci.txt

@@ -24,6 +24,16 @@ Required properties:
 	based on a specific SoC configuration.
 - interrupts: interrupt number mapped to CPU.
 - clocks: spi clk phandle
+          For 66AK2G this property should be set per binding,
+          Documentation/devicetree/bindings/clock/ti,sci-clk.txt
+
+SoC-specific Required Properties:
+
+The following are mandatory properties for Keystone 2 66AK2G SoCs only:
+
+- power-domains:	Should contain a phandle to a PM domain provider node
+			and an args specifier containing the SPI device id
+			value. This property is as per the binding,
 
 Optional:
 - cs-gpios: gpio chip selects

Documentation/devicetree/bindings/spi/spi-rspi.txt

@@ -5,11 +5,14 @@ Required properties:
 		     "renesas,rspi-<soctype>", "renesas,rspi" as fallback.
 		     For Renesas Serial Peripheral Interface on RZ/A1H:
 		     "renesas,rspi-<soctype>", "renesas,rspi-rz" as fallback.
-		     For Quad Serial Peripheral Interface on R-Car Gen2:
+		     For Quad Serial Peripheral Interface on R-Car Gen2 and
+		     RZ/G1 devices:
 		     "renesas,qspi-<soctype>", "renesas,qspi" as fallback.
 		     Examples with soctypes are:
 		        - "renesas,rspi-sh7757" (SH)
 			- "renesas,rspi-r7s72100" (RZ/A1H)
+			- "renesas,qspi-r8a7743" (RZ/G1M)
+			- "renesas,qspi-r8a7745" (RZ/G1E)
 			- "renesas,qspi-r8a7790" (R-Car H2)
 			- "renesas,qspi-r8a7791" (R-Car M2-W)
 			- "renesas,qspi-r8a7792" (R-Car V2H)

Documentation/devicetree/bindings/spi/spi-sprd-adi.txt

+Spreadtrum ADI controller
+
+ADI is the abbreviation of Anolog-Digital interface, which is used to access
+analog chip (such as PMIC) from digital chip. ADI controller follows the SPI
+framework for its hardware implementation is alike to SPI bus and its timing
+is compatile to SPI timing.
+
+ADI controller has 50 channels including 2 software read/write channels and
+48 hardware channels to access analog chip. For 2 software read/write channels,
+users should set ADI registers to access analog chip. For hardware channels,
+we can configure them to allow other hardware components to use it independently,
+which means we can just link one analog chip address to one hardware channel,
+then users can access the mapped analog chip address by this hardware channel
+triggered by hardware components instead of ADI software channels.
+
+Thus we introduce one property named "sprd,hw-channels" to configure hardware
+channels, the first value specifies the hardware channel id which is used to
+transfer data triggered by hardware automatically, and the second value specifies
+the analog chip address where user want to access by hardware components.
+
+Since we have multi-subsystems will use unique ADI to access analog chip, when
+one system is reading/writing data by ADI software channels, that should be under
+one hardware spinlock protection to prevent other systems from reading/writing
+data by ADI software channels at the same time, or two parallel routine of setting
+ADI registers will make ADI controller registers chaos to lead incorrect results.
+Then we need one hardware spinlock to synchronize between the multiple subsystems.
+
+Required properties:
+- compatible: Should be "sprd,sc9860-adi".
+- reg: Offset and length of ADI-SPI controller register space.
+- hwlocks: Reference to a phandle of a hwlock provider node.
+- hwlock-names: Reference to hwlock name strings defined in the same order
+	as the hwlocks, should be "adi".
+- #address-cells: Number of cells required to define a chip select address
+	on the ADI-SPI bus. Should be set to 1.
+- #size-cells: Size of cells required to define a chip select address size
+	on the ADI-SPI bus. Should be set to 0.
+
+Optional properties:
+- sprd,hw-channels: This is an array of channel values up to 49 channels.
+	The first value specifies the hardware channel id which is used to
+	transfer data triggered by hardware automatically, and the second
+	value specifies the analog chip address where user want to access
+	by hardware components.
+
+SPI slave nodes must be children of the SPI controller node and can contain
+properties described in Documentation/devicetree/bindings/spi/spi-bus.txt.
+
+Example:
+	adi_bus: spi@40030000 {
+		compatible = "sprd,sc9860-adi";
+		reg = <0 0x40030000 0 0x10000>;
+		hwlocks = <&hwlock1 0>;
+		hwlock-names = "adi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		sprd,hw-channels = <30 0x8c20>;
+	};

drivers/spi/Kconfig

 #
 # SPI driver configuration
 #
-# NOTE:  the reason this doesn't show SPI slave support is mostly that
-# nobody's needed a slave side API yet.  The master-role API is not
-# fully appropriate there, so it'd need some thought to do well.
-#
 menuconfig SPI
 	bool "SPI support"
 	depends on HAS_IOMEM
@@ -379,7 +375,7 @@ config SPI_FSL_DSPI
 	tristate "Freescale DSPI controller"
 	select REGMAP_MMIO
 	depends on HAS_DMA
-	depends on SOC_VF610 || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
+	depends on SOC_VF610 || SOC_LS1021A || ARCH_LAYERSCAPE || M5441x || COMPILE_TEST
 	help
 	  This enables support for the Freescale DSPI controller in master
 	  mode. VF610 platform uses the controller.
@@ -626,6 +622,13 @@ config SPI_SIRF
 	help
 	  SPI driver for CSR SiRFprimaII SoCs
 
+config SPI_SPRD_ADI
+	tristate "Spreadtrum ADI controller"
+	depends on ARCH_SPRD || COMPILE_TEST
+	depends on HWSPINLOCK || (COMPILE_TEST && !HWSPINLOCK)
+	help
+	  ADI driver based on SPI for Spreadtrum SoCs.
+
 config SPI_STM32
 	tristate "STMicroelectronics STM32 SPI controller"
 	depends on ARCH_STM32 || COMPILE_TEST

drivers/spi/Makefile

@@ -91,6 +91,7 @@ obj-$(CONFIG_SPI_SH_HSPI)		+= spi-sh-hspi.o
 obj-$(CONFIG_SPI_SH_MSIOF)		+= spi-sh-msiof.o
 obj-$(CONFIG_SPI_SH_SCI)		+= spi-sh-sci.o
 obj-$(CONFIG_SPI_SIRF)		+= spi-sirf.o
+obj-$(CONFIG_SPI_SPRD_ADI)		+= spi-sprd-adi.o
 obj-$(CONFIG_SPI_STM32) 		+= spi-stm32.o
 obj-$(CONFIG_SPI_ST_SSC4)		+= spi-st-ssc4.o
 obj-$(CONFIG_SPI_SUN4I)			+= spi-sun4i.o

drivers/spi/spi-armada-3700.c

@@ -213,7 +213,7 @@ static void a3700_spi_mode_set(struct a3700_spi *a3700_spi,
 }
 
 static void a3700_spi_clock_set(struct a3700_spi *a3700_spi,
-				unsigned int speed_hz, u16 mode)
+				unsigned int speed_hz)
 {
 	u32 val;
 	u32 prescale;
@@ -231,17 +231,6 @@ static void a3700_spi_clock_set(struct a3700_spi *a3700_spi,
 		val |= A3700_SPI_CLK_CAPT_EDGE;
 		spireg_write(a3700_spi, A3700_SPI_IF_TIME_REG, val);
 	}
-
-	val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG);
-	val &= ~(A3700_SPI_CLK_POL | A3700_SPI_CLK_PHA);
-
-	if (mode & SPI_CPOL)
-		val |= A3700_SPI_CLK_POL;
-
-	if (mode & SPI_CPHA)
-		val |= A3700_SPI_CLK_PHA;
-
-	spireg_write(a3700_spi, A3700_SPI_IF_CFG_REG, val);
 }
 
 static void a3700_spi_bytelen_set(struct a3700_spi *a3700_spi, unsigned int len)
@@ -423,7 +412,7 @@ static void a3700_spi_transfer_setup(struct spi_device *spi,
 
 	a3700_spi = spi_master_get_devdata(spi->master);
 
-	a3700_spi_clock_set(a3700_spi, xfer->speed_hz, spi->mode);
+	a3700_spi_clock_set(a3700_spi, xfer->speed_hz);
 
 	byte_len = xfer->bits_per_word >> 3;
 
@@ -584,6 +573,8 @@ static int a3700_spi_prepare_message(struct spi_master *master,
 
 	a3700_spi_bytelen_set(a3700_spi, 4);
 
+	a3700_spi_mode_set(a3700_spi, spi->mode);
+
 	return 0;
 }
 

drivers/spi/spi-axi-spi-engine.c

@@ -553,7 +553,7 @@ static int spi_engine_probe(struct platform_device *pdev)
 
 static int spi_engine_remove(struct platform_device *pdev)
 {
-	struct spi_master *master = platform_get_drvdata(pdev);
+	struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
 	struct spi_engine *spi_engine = spi_master_get_devdata(master);
 	int irq = platform_get_irq(pdev, 0);
 
@@ -561,6 +561,8 @@ static int spi_engine_remove(struct platform_device *pdev)
 
 	free_irq(irq, master);
 
+	spi_master_put(master);
+
 	writel_relaxed(0xff, spi_engine->base + SPI_ENGINE_REG_INT_PENDING);
 	writel_relaxed(0x00, spi_engine->base + SPI_ENGINE_REG_INT_ENABLE);
 	writel_relaxed(0x01, spi_engine->base + SPI_ENGINE_REG_RESET);

drivers/spi/spi-fsl-dspi.c

@@ -32,6 +32,7 @@
 #include <linux/regmap.h>
 #include <linux/sched.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/spi-fsl-dspi.h>
 #include <linux/spi/spi_bitbang.h>
 #include <linux/time.h>
 
@@ -151,6 +152,11 @@ static const struct fsl_dspi_devtype_data ls2085a_data = {
 	.max_clock_factor = 8,
 };
 
+static const struct fsl_dspi_devtype_data coldfire_data = {
+	.trans_mode = DSPI_EOQ_MODE,
+	.max_clock_factor = 8,
+};
+
 struct fsl_dspi_dma {
 	/* Length of transfer in words of DSPI_FIFO_SIZE */
 	u32 curr_xfer_len;
@@ -741,6 +747,7 @@ static int dspi_setup(struct spi_device *spi)
 {
 	struct chip_data *chip;
 	struct fsl_dspi *dspi = spi_master_get_devdata(spi->master);
+	struct fsl_dspi_platform_data *pdata;
 	u32 cs_sck_delay = 0, sck_cs_delay = 0;
 	unsigned char br = 0, pbr = 0, pcssck = 0, cssck = 0;
 	unsigned char pasc = 0, asc = 0, fmsz = 0;
@@ -761,11 +768,18 @@ static int dspi_setup(struct spi_device *spi)
 			return -ENOMEM;
 	}
 
-	of_property_read_u32(spi->dev.of_node, "fsl,spi-cs-sck-delay",
-			&cs_sck_delay);
+	pdata = dev_get_platdata(&dspi->pdev->dev);
 
-	of_property_read_u32(spi->dev.of_node, "fsl,spi-sck-cs-delay",
-			&sck_cs_delay);
+	if (!pdata) {
+		of_property_read_u32(spi->dev.of_node, "fsl,spi-cs-sck-delay",
+				&cs_sck_delay);
+
+		of_property_read_u32(spi->dev.of_node, "fsl,spi-sck-cs-delay",
+				&sck_cs_delay);
+	} else {
+		cs_sck_delay = pdata->cs_sck_delay;
+		sck_cs_delay = pdata->sck_cs_delay;
+	}
 
 	chip->mcr_val = SPI_MCR_MASTER | SPI_MCR_PCSIS |
 		SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF;
@@ -949,6 +963,7 @@ static int dspi_probe(struct platform_device *pdev)
 	struct fsl_dspi *dspi;
 	struct resource *res;
 	void __iomem *base;
+	struct fsl_dspi_platform_data *pdata;
 	int ret = 0, cs_num, bus_num;
 
 	master = spi_alloc_master(&pdev->dev, sizeof(struct fsl_dspi));
@@ -969,25 +984,34 @@ static int dspi_probe(struct platform_device *pdev)
 	master->bits_per_word_mask = SPI_BPW_MASK(4) | SPI_BPW_MASK(8) |
 					SPI_BPW_MASK(16);
 
-	ret = of_property_read_u32(np, "spi-num-chipselects", &cs_num);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "can't get spi-num-chipselects\n");
-		goto out_master_put;
-	}
-	master->num_chipselect = cs_num;
+	pdata = dev_get_platdata(&pdev->dev);
+	if (pdata) {
+		master->num_chipselect = pdata->cs_num;
+		master->bus_num = pdata->bus_num;
 
-	ret = of_property_read_u32(np, "bus-num", &bus_num);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "can't get bus-num\n");
-		goto out_master_put;
-	}
-	master->bus_num = bus_num;
+		dspi->devtype_data = &coldfire_data;
+	} else {
 
-	dspi->devtype_data = of_device_get_match_data(&pdev->dev);
-	if (!dspi->devtype_data) {
-		dev_err(&pdev->dev, "can't get devtype_data\n");
-		ret = -EFAULT;
-		goto out_master_put;
+		ret = of_property_read_u32(np, "spi-num-chipselects", &cs_num);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "can't get spi-num-chipselects\n");
+			goto out_master_put;
+		}
+		master->num_chipselect = cs_num;
+
+		ret = of_property_read_u32(np, "bus-num", &bus_num);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "can't get bus-num\n");
+			goto out_master_put;
+		}
+		master->bus_num = bus_num;
+
+		dspi->devtype_data = of_device_get_match_data(&pdev->dev);
+		if (!dspi->devtype_data) {
+			dev_err(&pdev->dev, "can't get devtype_data\n");
+			ret = -EFAULT;
+			goto out_master_put;
+		}
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

drivers/spi/spi-mxs.c

@@ -44,6 +44,7 @@
 #include <linux/completion.h>
 #include <linux/gpio.h>
 #include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
 #include <linux/module.h>
 #include <linux/stmp_device.h>
 #include <linux/spi/spi.h>
@@ -442,6 +443,85 @@ static int mxs_spi_transfer_one(struct spi_master *master,
 	return status;
 }
 
+static int mxs_spi_runtime_suspend(struct device *dev)
+{
+	struct spi_master *master = dev_get_drvdata(dev);
+	struct mxs_spi *spi = spi_master_get_devdata(master);
+	struct mxs_ssp *ssp = &spi->ssp;
+	int ret;
+
+	clk_disable_unprepare(ssp->clk);
+
+	ret = pinctrl_pm_select_idle_state(dev);
+	if (ret) {
+		int ret2 = clk_prepare_enable(ssp->clk);
+
+		if (ret2)
+			dev_warn(dev, "Failed to reenable clock after failing pinctrl request (pinctrl: %d, clk: %d)\n",
+				 ret, ret2);
+	}
+
+	return ret;
+}
+
+static int mxs_spi_runtime_resume(struct device *dev)
+{
+	struct spi_master *master = dev_get_drvdata(dev);
+	struct mxs_spi *spi = spi_master_get_devdata(master);
+	struct mxs_ssp *ssp = &spi->ssp;
+	int ret;
+
+	ret = pinctrl_pm_select_default_state(dev);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(ssp->clk);
+	if (ret)
+		pinctrl_pm_select_idle_state(dev);
+
+	return ret;
+}
+
+static int __maybe_unused mxs_spi_suspend(struct device *dev)
+{
+	struct spi_master *master = dev_get_drvdata(dev);
+	int ret;
+
+	ret = spi_master_suspend(master);
+	if (ret)
+		return ret;
+
+	if (!pm_runtime_suspended(dev))
+		return mxs_spi_runtime_suspend(dev);
+	else
+		return 0;
+}
+
+static int __maybe_unused mxs_spi_resume(struct device *dev)
+{
+	struct spi_master *master = dev_get_drvdata(dev);
+	int ret;
+
+	if (!pm_runtime_suspended(dev))
+		ret = mxs_spi_runtime_resume(dev);
+	else
+		ret = 0;
+	if (ret)
+		return ret;
+
+	ret = spi_master_resume(master);
+	if (ret < 0 && !pm_runtime_suspended(dev))
+		mxs_spi_runtime_suspend(dev);
+
+	return ret;
+}
+
+static const struct dev_pm_ops mxs_spi_pm = {
+	SET_RUNTIME_PM_OPS(mxs_spi_runtime_suspend,
+			   mxs_spi_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(mxs_spi_suspend, mxs_spi_resume)
+};
+
 static const struct of_device_id mxs_spi_dt_ids[] = {
 	{ .compatible = "fsl,imx23-spi", .data = (void *) IMX23_SSP, },
 	{ .compatible = "fsl,imx28-spi", .data = (void *) IMX28_SSP, },
@@ -493,12 +573,15 @@ static int mxs_spi_probe(struct platform_device *pdev)
 	if (!master)
 		return -ENOMEM;
 
+	platform_set_drvdata(pdev, master);
+
 	master->transfer_one_message = mxs_spi_transfer_one;
 	master->bits_per_word_mask = SPI_BPW_MASK(8);
 	master->mode_bits = SPI_CPOL | SPI_CPHA;
 	master->num_chipselect = 3;
 	master->dev.of_node = np;
 	master->flags = SPI_MASTER_HALF_DUPLEX;
+	master->auto_runtime_pm = true;
 
 	spi = spi_master_get_devdata(master);
 	ssp = &spi->ssp;
@@ -521,28 +604,41 @@ static int mxs_spi_probe(struct platform_device *pdev)
 		goto out_master_free;
 	}
 
-	ret = clk_prepare_enable(ssp->clk);
-	if (ret)
-		goto out_dma_release;
+	pm_runtime_enable(ssp->dev);
+	if (!pm_runtime_enabled(ssp->dev)) {
+		ret = mxs_spi_runtime_resume(ssp->dev);
+		if (ret < 0) {
+			dev_err(ssp->dev, "runtime resume failed\n");
+			goto out_dma_release;
+		}
+	}
+
+	ret = pm_runtime_get_sync(ssp->dev);
+	if (ret < 0) {
+		dev_err(ssp->dev, "runtime_get_sync failed\n");
+		goto out_pm_runtime_disable;
+	}
 
 	clk_set_rate(ssp->clk, clk_freq);
 
 	ret = stmp_reset_block(ssp->base);
 	if (ret)
-		goto out_disable_clk;
-
-	platform_set_drvdata(pdev, master);
+		goto out_pm_runtime_put;
 
 	ret = devm_spi_register_master(&pdev->dev, master);
 	if (ret) {
 		dev_err(&pdev->dev, "Cannot register SPI master, %d\n", ret);
-		goto out_disable_clk;
+		goto out_pm_runtime_put;
 	}
 
+	pm_runtime_put(ssp->dev);
+
 	return 0;
 
-out_disable_clk:
-	clk_disable_unprepare(ssp->clk);
+out_pm_runtime_put:
+	pm_runtime_put(ssp->dev);
+out_pm_runtime_disable:
+	pm_runtime_disable(ssp->dev);
 out_dma_release:
 	dma_release_channel(ssp->dmach);
 out_master_free:
@@ -560,7 +656,10 @@ static int mxs_spi_remove(struct platform_device *pdev)
 	spi = spi_master_get_devdata(master);
 	ssp = &spi->ssp;
 
-	clk_disable_unprepare(ssp->clk);
+	pm_runtime_disable(&pdev->dev);
+	if (!pm_runtime_status_suspended(&pdev->dev))
+		mxs_spi_runtime_suspend(&pdev->dev);
+
 	dma_release_channel(ssp->dmach);
 
 	return 0;
@@ -572,6 +671,7 @@ static struct platform_driver mxs_spi_driver = {
 	.driver	= {
 		.name	= DRIVER_NAME,
 		.of_match_table = mxs_spi_dt_ids,
+		.pm = &mxs_spi_pm,
 	},
 };
 

drivers/spi/spi-orion.c

@@ -671,7 +671,6 @@ static int orion_spi_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev,
 				"%pOF has no valid 'reg' property (%d)\n",
 				np, status);
-			status = 0;
 			continue;
 		}
 

drivers/spi/spi-rspi.c

@@ -1221,7 +1221,6 @@ static int rspi_probe(struct platform_device *pdev)
 	struct spi_master *master;
 	struct rspi_data *rspi;
 	int ret;
-	const struct of_device_id *of_id;
 	const struct rspi_plat_data *rspi_pd;
 	const struct spi_ops *ops;
 
@@ -1229,9 +1228,8 @@ static int rspi_probe(struct platform_device *pdev)
 	if (master == NULL)
 		return -ENOMEM;
 
-	of_id = of_match_device(rspi_of_match, &pdev->dev);
-	if (of_id) {
-		ops = of_id->data;
+	ops = of_device_get_match_data(&pdev->dev);
+	if (ops) {
 		ret = rspi_parse_dt(&pdev->dev, master);
 		if (ret)
 			goto error1;

drivers/spi/spi-s3c64xx.c

@@ -752,7 +752,6 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
 {
 	struct s3c64xx_spi_csinfo *cs = spi->controller_data;
 	struct s3c64xx_spi_driver_data *sdd;
-	struct s3c64xx_spi_info *sci;
 	int err;
 
 	sdd = spi_master_get_devdata(spi->master);
@@ -788,8 +787,6 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
 		spi_set_ctldata(spi, cs);
 	}
 
-	sci = sdd->cntrlr_info;
-
 	pm_runtime_get_sync(&sdd->pdev->dev);
 
 	/* Check if we can provide the requested rate */

drivers/spi/spi-sh-msiof.c

@@ -900,7 +900,7 @@ static int sh_msiof_transfer_one(struct spi_master *master,
 				break;
 			copy32 = copy_bswap32;
 		} else if (bits <= 16) {
-			if (l & 1)
+			if (l & 3)
 				break;
 			copy32 = copy_wswap32;
 		} else {
@@ -1021,6 +1021,8 @@ static const struct sh_msiof_chipdata rcar_gen3_data = {
 
 static const struct of_device_id sh_msiof_match[] = {
 	{ .compatible = "renesas,sh-mobile-msiof", .data = &sh_data },
+	{ .compatible = "renesas,msiof-r8a7743",   .data = &rcar_gen2_data },
+	{ .compatible = "renesas,msiof-r8a7745",   .data = &rcar_gen2_data },
 	{ .compatible = "renesas,msiof-r8a7790",   .data = &rcar_gen2_data },
 	{ .compatible = "renesas,msiof-r8a7791",   .data = &rcar_gen2_data },
 	{ .compatible = "renesas,msiof-r8a7792",   .data = &rcar_gen2_data },
@@ -1188,12 +1190,10 @@ static int sh_msiof_request_dma(struct sh_msiof_spi_priv *p)
 static void sh_msiof_release_dma(struct sh_msiof_spi_priv *p)
 {
 	struct spi_master *master = p->master;
-	struct device *dev;
 
 	if (!master->dma_tx)
 		return;
 
-	dev = &p->pdev->dev;
 	dma_unmap_single(master->dma_rx->device->dev, p->rx_dma_addr,
 			 PAGE_SIZE, DMA_FROM_DEVICE);
 	dma_unmap_single(master->dma_tx->device->dev, p->tx_dma_addr,
@@ -1209,15 +1209,13 @@ static int sh_msiof_spi_probe(struct platform_device *pdev)
 	struct resource	*r;
 	struct spi_master *master;
 	const struct sh_msiof_chipdata *chipdata;
-	const struct of_device_id *of_id;
 	struct sh_msiof_spi_info *info;
 	struct sh_msiof_spi_priv *p;
 	int i;
 	int ret;
 
-	of_id = of_match_device(sh_msiof_match, &pdev->dev);
-	if (of_id) {
-		chipdata = of_id->data;
+	chipdata = of_device_get_match_data(&pdev->dev);
+	if (chipdata) {
 		info = sh_msiof_spi_parse_dt(&pdev->dev);
 	} else {
 		chipdata = (const void *)pdev->id_entry->driver_data;

drivers/spi/spi-tegra114.c

@@ -50,7 +50,7 @@
 #define SPI_IDLE_SDA_PULL_LOW			(2 << 18)
 #define SPI_IDLE_SDA_PULL_HIGH			(3 << 18)
 #define SPI_IDLE_SDA_MASK			(3 << 18)
-#define SPI_CS_SS_VAL				(1 << 20)
+#define SPI_CS_SW_VAL				(1 << 20)
 #define SPI_CS_SW_HW				(1 << 21)
 /* SPI_CS_POL_INACTIVE bits are default high */
 						/* n from 0 to 3 */
@@ -705,9 +705,9 @@ static u32 tegra_spi_setup_transfer_one(struct spi_device *spi,
 
 		command1 |= SPI_CS_SW_HW;
 		if (spi->mode & SPI_CS_HIGH)
-			command1 |= SPI_CS_SS_VAL;
+			command1 |= SPI_CS_SW_VAL;
 		else
-			command1 &= ~SPI_CS_SS_VAL;
+			command1 &= ~SPI_CS_SW_VAL;
 
 		tegra_spi_writel(tspi, 0, SPI_COMMAND2);
 	} else {

drivers/spi/spi.c

@@ -2200,7 +2200,7 @@ static void devm_spi_unregister(struct device *dev, void *res)
  * Context: can sleep
  *
  * Register a SPI device as with spi_register_controller() which will
- * automatically be unregister
+ * automatically be unregistered and freed.
  *
  * Return: zero on success, else a negative error code.
  */
@@ -2241,15 +2241,18 @@ static int __unregister(struct device *dev, void *null)
  * only ones directly touching chip registers.
  *
  * This must be called from context that can sleep.
+ *
+ * Note that this function also drops a reference to the controller.
  */
 void spi_unregister_controller(struct spi_controller *ctlr)
 {
 	struct spi_controller *found;
+	int id = ctlr->bus_num;
 	int dummy;
 
 	/* First make sure that this controller was ever added */
 	mutex_lock(&board_lock);
-	found = idr_find(&spi_master_idr, ctlr->bus_num);
+	found = idr_find(&spi_master_idr, id);
 	mutex_unlock(&board_lock);
 	if (found != ctlr) {
 		dev_dbg(&ctlr->dev,
@@ -2269,7 +2272,7 @@ void spi_unregister_controller(struct spi_controller *ctlr)
 	device_unregister(&ctlr->dev);
 	/* free bus id */
 	mutex_lock(&board_lock);
-	idr_remove(&spi_master_idr, ctlr->bus_num);
+	idr_remove(&spi_master_idr, id);
 	mutex_unlock(&board_lock);
 }
 EXPORT_SYMBOL_GPL(spi_unregister_controller);

include/linux/spi/spi-fsl-dspi.h

+/*
+ * Freescale DSPI controller driver
+ *
+ * Copyright (c) 2017 Angelo Dureghello <angelo@sysam.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef SPI_FSL_DSPI_HEADER_H
+#define SPI_FSL_DSPI_HEADER_H
+
+/**
+ * struct fsl_dspi_platform_data - platform data for the Freescale DSPI driver
+ * @bus_num: board specific identifier for this DSPI driver.
+ * @cs_num: number of chip selects supported by this DSPI driver.
+ */
+struct fsl_dspi_platform_data {
+	u32 cs_num;
+	u32 bus_num;
+	u32 sck_cs_delay;
+	u32 cs_sck_delay;
+};
+
+#endif /* SPI_FSL_DSPI_HEADER_H */