Skip to content

L
linux
Commit e76812ed authored by Adrian Bunk's avatar Adrian Bunk Committed by Ralf Baechle
Browse files
Options

[MIPS] Remove asm-mips/mips-boards/atlas{,int}.h 

asm-mips/mips-boards/atlas{,int}.h are now obsolete.
Signed-off-by: default avatarAdrian Bunk <bunk@kernel.org>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent fc22c357
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 189 deletions
include/asm-mips/mips-boards/atlas.h deleted 100644 → 0
View file @ fc22c357
/*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
*
* ########################################################################
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* ########################################################################
*
* Defines of the Atlas board specific address-MAP, registers, etc.
*
*/
#ifndef _MIPS_ATLAS_H
#define _MIPS_ATLAS_H
#include <asm/addrspace.h>
/*
* Atlas RTC-device indirect register access.
*/
#define ATLAS_RTC_ADR_REG 0x1f000800
#define ATLAS_RTC_DAT_REG 0x1f000808
/*
* Atlas interrupt controller register base.
*/
#define ATLAS_ICTRL_REGS_BASE 0x1f000000
/*
* Atlas registers are memory mapped on 64-bit aligned boundaries and
* only word access are allowed.
*/
struct atlas_ictrl_regs {
volatile unsigned int intraw;
int dummy1;
volatile unsigned int intseten;
int dummy2;
volatile unsigned int intrsten;
int dummy3;
volatile unsigned int intenable;
int dummy4;
volatile unsigned int intstatus;
int dummy5;
};
/*
* Atlas UART register base.
*/
#define ATLAS_UART_REGS_BASE 0x1f000900
#define ATLAS_BASE_BAUD ( 3686400 / 16 )
/*
* Atlas PSU standby register.
*/
#define ATLAS_PSUSTBY_REG 0x1f000600
#define ATLAS_GOSTBY 0x4d
/*
* We make a universal assumption about the way the bootloader (YAMON)
* have located the Philips SAA9730 chip.
* This is not ideal, but is needed for setting up remote debugging as
* soon as possible.
*/
#define ATLAS_SAA9730_REG 0x10800000
#define ATLAS_SAA9730_BAUDCLOCK 3692300
#endif /* !(_MIPS_ATLAS_H) */
include/asm-mips/mips-boards/atlasint.h deleted 100644 → 0
View file @ fc22c357
/*
* Copyright (C) 1999, 2006 MIPS Technologies, Inc. All rights reserved.
* Authors: Carsten Langgaard <carstenl@mips.com>
* Maciej W. Rozycki <macro@mips.com>
*
* ########################################################################
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* ########################################################################
*
* Defines for the Atlas interrupt controller.
*
*/
#ifndef _MIPS_ATLASINT_H
#define _MIPS_ATLASINT_H
#include <irq.h>
/* CPU interrupt offsets */
#define MIPSCPU_INT_SW0 0
#define MIPSCPU_INT_SW1 1
#define MIPSCPU_INT_MB0 2
#define MIPSCPU_INT_ATLAS MIPSCPU_INT_MB0
#define MIPSCPU_INT_MB1 3
#define MIPSCPU_INT_MB2 4
#define MIPSCPU_INT_MB3 5
#define MIPSCPU_INT_MB4 6
/*
* Interrupts 8..39 are used for Atlas interrupt controller interrupts
*/
#define ATLAS_INT_BASE 8
#define ATLAS_INT_UART (ATLAS_INT_BASE + 0)
#define ATLAS_INT_TIM0 (ATLAS_INT_BASE + 1)
#define ATLAS_INT_RES2 (ATLAS_INT_BASE + 2)
#define ATLAS_INT_RES3 (ATLAS_INT_BASE + 3)
#define ATLAS_INT_RTC (ATLAS_INT_BASE + 4)
#define ATLAS_INT_COREHI (ATLAS_INT_BASE + 5)
#define ATLAS_INT_CORELO (ATLAS_INT_BASE + 6)
#define ATLAS_INT_RES7 (ATLAS_INT_BASE + 7)
#define ATLAS_INT_PCIA (ATLAS_INT_BASE + 8)
#define ATLAS_INT_PCIB (ATLAS_INT_BASE + 9)
#define ATLAS_INT_PCIC (ATLAS_INT_BASE + 10)
#define ATLAS_INT_PCID (ATLAS_INT_BASE + 11)
#define ATLAS_INT_ENUM (ATLAS_INT_BASE + 12)
#define ATLAS_INT_DEG (ATLAS_INT_BASE + 13)
#define ATLAS_INT_ATXFAIL (ATLAS_INT_BASE + 14)
#define ATLAS_INT_INTA (ATLAS_INT_BASE + 15)
#define ATLAS_INT_INTB (ATLAS_INT_BASE + 16)
#define ATLAS_INT_ETH ATLAS_INT_INTB
#define ATLAS_INT_INTC (ATLAS_INT_BASE + 17)
#define ATLAS_INT_SCSI ATLAS_INT_INTC
#define ATLAS_INT_INTD (ATLAS_INT_BASE + 18)
#define ATLAS_INT_SERR (ATLAS_INT_BASE + 19)
#define ATLAS_INT_RES20 (ATLAS_INT_BASE + 20)
#define ATLAS_INT_RES21 (ATLAS_INT_BASE + 21)
#define ATLAS_INT_RES22 (ATLAS_INT_BASE + 22)
#define ATLAS_INT_RES23 (ATLAS_INT_BASE + 23)
#define ATLAS_INT_RES24 (ATLAS_INT_BASE + 24)
#define ATLAS_INT_RES25 (ATLAS_INT_BASE + 25)
#define ATLAS_INT_RES26 (ATLAS_INT_BASE + 26)
#define ATLAS_INT_RES27 (ATLAS_INT_BASE + 27)
#define ATLAS_INT_RES28 (ATLAS_INT_BASE + 28)
#define ATLAS_INT_RES29 (ATLAS_INT_BASE + 29)
#define ATLAS_INT_RES30 (ATLAS_INT_BASE + 30)
#define ATLAS_INT_RES31 (ATLAS_INT_BASE + 31)
#define ATLAS_INT_END (ATLAS_INT_BASE + 31)
/*
* Interrupts 64..127 are used for Soc-it Classic interrupts
*/
#define MSC01C_INT_BASE 64
/* SOC-it Classic interrupt offsets */
#define MSC01C_INT_TMR 0
#define MSC01C_INT_PCI 1
/*
* Interrupts 64..127 are used for Soc-it EIC interrupts
*/
#define MSC01E_INT_BASE 64
/* SOC-it EIC interrupt offsets */
#define MSC01E_INT_SW0 1
#define MSC01E_INT_SW1 2
#define MSC01E_INT_MB0 3
#define MSC01E_INT_ATLAS MSC01E_INT_MB0
#define MSC01E_INT_MB1 4
#define MSC01E_INT_MB2 5
#define MSC01E_INT_MB3 6
#define MSC01E_INT_MB4 7
#define MSC01E_INT_TMR 8
#define MSC01E_INT_PCI 9
#define MSC01E_INT_PERFCTR 10
#define MSC01E_INT_CPUCTR 11
#endif /* !(_MIPS_ATLASINT_H) */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7