Commit e773202e authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-torvalds' of...

Merge branch 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson

* 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ux500: allow 5500 and 8500 to be built together
  ux500: modem_irq is only for 5500
  ux500: dynamic SOC detection
  ux500: rename MOP board Kconfig
  ux500: remove build-time changing macros
parents abf8792d d2a40972
...@@ -9,6 +9,10 @@ CONFIG_MODULE_UNLOAD=y ...@@ -9,6 +9,10 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_LBDAF is not set # CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_U8500=y CONFIG_ARCH_U8500=y
CONFIG_UX500_SOC_DB5500=y
CONFIG_UX500_SOC_DB8500=y
CONFIG_MACH_U8500=y
CONFIG_MACH_U5500=y
CONFIG_SMP=y CONFIG_SMP=y
CONFIG_NR_CPUS=2 CONFIG_NR_CPUS=2
CONFIG_PREEMPT=y CONFIG_PREEMPT=y
......
...@@ -7,28 +7,30 @@ config UX500_SOC_COMMON ...@@ -7,28 +7,30 @@ config UX500_SOC_COMMON
select HAS_MTU select HAS_MTU
select NOMADIK_GPIO select NOMADIK_GPIO
config UX500_SOC_DB8500 menu "Ux500 SoC"
bool
config UX500_SOC_DB5500 config UX500_SOC_DB5500
bool bool "DB5500"
config UX500_SOC_DB8500
bool "DB8500"
endmenu
choice menu "Ux500 target platform"
prompt "Ux500 target platform"
default MACH_U8500_MOP
config MACH_U8500_MOP config MACH_U8500
bool "U8500 Development platform" bool "U8500 Development platform"
select UX500_SOC_DB8500 depends on UX500_SOC_DB8500
help help
Include support for the mop500 development platform. Include support for the mop500 development platform.
config MACH_U5500 config MACH_U5500
bool "U5500 Development platform" bool "U5500 Development platform"
select UX500_SOC_DB5500 depends on UX500_SOC_DB5500
help help
Include support for the U5500 development platform. Include support for the U5500 development platform.
endchoice endmenu
config UX500_DEBUG_UART config UX500_DEBUG_UART
int "Ux500 UART to use for low-level debug" int "Ux500 UART to use for low-level debug"
...@@ -39,14 +41,14 @@ config UX500_DEBUG_UART ...@@ -39,14 +41,14 @@ config UX500_DEBUG_UART
config U5500_MODEM_IRQ config U5500_MODEM_IRQ
bool "Modem IRQ support" bool "Modem IRQ support"
depends on MACH_U5500 depends on UX500_SOC_DB5500
default y default y
help help
Add support for handling IRQ:s from modem side Add support for handling IRQ:s from modem side
config U5500_MBOX config U5500_MBOX
bool "Mailbox support" bool "Mailbox support"
depends on MACH_U5500 && U5500_MODEM_IRQ depends on U5500_MODEM_IRQ
default y default y
help help
Add support for U5500 mailbox communication with modem side Add support for U5500 mailbox communication with modem side
......
...@@ -2,10 +2,11 @@ ...@@ -2,10 +2,11 @@
# Makefile for the linux kernel, U8500 machine. # Makefile for the linux kernel, U8500 machine.
# #
obj-y := clock.o cpu.o devices.o devices-common.o obj-y := clock.o cpu.o devices.o devices-common.o \
id.o
obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu.o
obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o board-mop500-sdi.o \ obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \
board-mop500-keypads.o board-mop500-keypads.o
obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o
......
...@@ -136,8 +136,7 @@ EXPORT_SYMBOL(clk_disable); ...@@ -136,8 +136,7 @@ EXPORT_SYMBOL(clk_disable);
*/ */
static unsigned long clk_mtu_get_rate(struct clk *clk) static unsigned long clk_mtu_get_rate(struct clk *clk)
{ {
void __iomem *addr = __io_address(UX500_PRCMU_BASE) void __iomem *addr;
+ PRCM_TCR;
u32 tcr; u32 tcr;
int mtu = (int) clk->data; int mtu = (int) clk->data;
/* /*
...@@ -149,13 +148,20 @@ static unsigned long clk_mtu_get_rate(struct clk *clk) ...@@ -149,13 +148,20 @@ static unsigned long clk_mtu_get_rate(struct clk *clk)
unsigned long mturate; unsigned long mturate;
unsigned long retclk; unsigned long retclk;
if (cpu_is_u5500())
addr = __io_address(U5500_PRCMU_BASE);
else if (cpu_is_u8500())
addr = __io_address(U8500_PRCMU_BASE);
else
ux500_unknown_soc();
/* /*
* On a startup, always conifgure the TCR to the doze mode; * On a startup, always conifgure the TCR to the doze mode;
* bootloaders do it for us. Do this in the kernel too. * bootloaders do it for us. Do this in the kernel too.
*/ */
writel(PRCM_TCR_DOZE_MODE, addr); writel(PRCM_TCR_DOZE_MODE, addr + PRCM_TCR);
tcr = readl(addr); tcr = readl(addr + PRCM_TCR);
/* Get the rate from the parent as a default */ /* Get the rate from the parent as a default */
if (clk->parent_periph) if (clk->parent_periph)
......
...@@ -21,7 +21,20 @@ ...@@ -21,7 +21,20 @@
#include "devices-db5500.h" #include "devices-db5500.h"
static struct map_desc u5500_uart_io_desc[] __initdata = {
__IO_DEV_DESC(U5500_UART0_BASE, SZ_4K),
__IO_DEV_DESC(U5500_UART2_BASE, SZ_4K),
};
static struct map_desc u5500_io_desc[] __initdata = { static struct map_desc u5500_io_desc[] __initdata = {
__IO_DEV_DESC(U5500_GIC_CPU_BASE, SZ_4K),
__IO_DEV_DESC(U5500_GIC_DIST_BASE, SZ_4K),
__IO_DEV_DESC(U5500_L2CC_BASE, SZ_4K),
__IO_DEV_DESC(U5500_TWD_BASE, SZ_4K),
__IO_DEV_DESC(U5500_MTU0_BASE, SZ_4K),
__IO_DEV_DESC(U5500_SCU_BASE, SZ_4K),
__IO_DEV_DESC(U5500_BACKUPRAM0_BASE, SZ_8K),
__IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K), __IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K),
__IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K), __IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K),
__IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K), __IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K),
...@@ -143,6 +156,11 @@ static void __init db5500_add_gpios(void) ...@@ -143,6 +156,11 @@ static void __init db5500_add_gpios(void)
void __init u5500_map_io(void) void __init u5500_map_io(void)
{ {
/*
* Map the UARTs early so that the DEBUG_LL stuff continues to work.
*/
iotable_init(u5500_uart_io_desc, ARRAY_SIZE(u5500_uart_io_desc));
ux500_map_io(); ux500_map_io();
iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc)); iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc));
......
...@@ -29,13 +29,31 @@ static struct platform_device *platform_devs[] __initdata = { ...@@ -29,13 +29,31 @@ static struct platform_device *platform_devs[] __initdata = {
}; };
/* minimum static i/o mapping required to boot U8500 platforms */ /* minimum static i/o mapping required to boot U8500 platforms */
static struct map_desc u8500_uart_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_UART0_BASE, SZ_4K),
__IO_DEV_DESC(U8500_UART2_BASE, SZ_4K),
};
static struct map_desc u8500_io_desc[] __initdata = { static struct map_desc u8500_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
__IO_DEV_DESC(U8500_L2CC_BASE, SZ_4K),
__IO_DEV_DESC(U8500_TWD_BASE, SZ_4K),
__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
__IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
__IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
__IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K),
__IO_DEV_DESC(U8500_CLKRST2_BASE, SZ_4K),
__IO_DEV_DESC(U8500_CLKRST3_BASE, SZ_4K),
__IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K),
__IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K),
__IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K), __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K),
__MEM_DEV_DESC(U8500_BOOT_ROM_BASE, SZ_1M),
}; };
static struct map_desc u8500_ed_io_desc[] __initdata = { static struct map_desc u8500_ed_io_desc[] __initdata = {
...@@ -52,71 +70,13 @@ static struct map_desc u8500_v2_io_desc[] __initdata = { ...@@ -52,71 +70,13 @@ static struct map_desc u8500_v2_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K), __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K),
}; };
/*
* Functions to differentiate between later ASICs
* We look into the end of the ROM to locate the hardcoded ASIC ID.
* This is only needed to differentiate between minor revisions and
* process variants of an ASIC, the major revisions are encoded in
* the cpuid.
*/
#define U8500_ASIC_ID_LOC_ED_V1 (U8500_BOOT_ROM_BASE + 0x1FFF4)
#define U8500_ASIC_ID_LOC_V2 (U8500_BOOT_ROM_BASE + 0x1DBF4)
#define U8500_ASIC_REV_ED 0x01
#define U8500_ASIC_REV_V10 0xA0
#define U8500_ASIC_REV_V11 0xA1
#define U8500_ASIC_REV_V20 0xB0
/**
* struct db8500_asic_id - fields of the ASIC ID
* @process: the manufacturing process, 0x40 is 40 nm
* 0x00 is "standard"
* @partnumber: hithereto 0x8500 for DB8500
* @revision: version code in the series
* This field definion is not formally defined but makes
* sense.
*/
struct db8500_asic_id {
u8 process;
u16 partnumber;
u8 revision;
};
/* This isn't going to change at runtime */
static struct db8500_asic_id db8500_id;
static void __init get_db8500_asic_id(void)
{
u32 asicid;
if (cpu_is_u8500v1() || cpu_is_u8500ed())
asicid = readl(__io_address(U8500_ASIC_ID_LOC_ED_V1));
else if (cpu_is_u8500v2())
asicid = readl(__io_address(U8500_ASIC_ID_LOC_V2));
else
BUG();
db8500_id.process = (asicid >> 24);
db8500_id.partnumber = (asicid >> 16) & 0xFFFFU;
db8500_id.revision = asicid & 0xFFU;
}
bool cpu_is_u8500v10(void)
{
return (db8500_id.revision == U8500_ASIC_REV_V10);
}
bool cpu_is_u8500v11(void)
{
return (db8500_id.revision == U8500_ASIC_REV_V11);
}
bool cpu_is_u8500v20(void)
{
return (db8500_id.revision == U8500_ASIC_REV_V20);
}
void __init u8500_map_io(void) void __init u8500_map_io(void)
{ {
/*
* Map the UARTs early so that the DEBUG_LL stuff continues to work.
*/
iotable_init(u8500_uart_io_desc, ARRAY_SIZE(u8500_uart_io_desc));
ux500_map_io(); ux500_map_io();
iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
...@@ -127,9 +87,6 @@ void __init u8500_map_io(void) ...@@ -127,9 +87,6 @@ void __init u8500_map_io(void)
iotable_init(u8500_v1_io_desc, ARRAY_SIZE(u8500_v1_io_desc)); iotable_init(u8500_v1_io_desc, ARRAY_SIZE(u8500_v1_io_desc));
else if (cpu_is_u8500v2()) else if (cpu_is_u8500v2())
iotable_init(u8500_v2_io_desc, ARRAY_SIZE(u8500_v2_io_desc)); iotable_init(u8500_v2_io_desc, ARRAY_SIZE(u8500_v2_io_desc));
/* Read out the ASIC ID as early as we can */
get_db8500_asic_id();
} }
static resource_size_t __initdata db8500_gpio_base[] = { static resource_size_t __initdata db8500_gpio_base[] = {
...@@ -159,20 +116,6 @@ static void __init db8500_add_gpios(void) ...@@ -159,20 +116,6 @@ static void __init db8500_add_gpios(void)
*/ */
void __init u8500_init_devices(void) void __init u8500_init_devices(void)
{ {
/* Display some ASIC boilerplate */
pr_info("DB8500: process: %02x, revision ID: 0x%02x\n",
db8500_id.process, db8500_id.revision);
if (cpu_is_u8500ed())
pr_info("DB8500: Early Drop (ED)\n");
else if (cpu_is_u8500v10())
pr_info("DB8500: version 1.0\n");
else if (cpu_is_u8500v11())
pr_info("DB8500: version 1.1\n");
else if (cpu_is_u8500v20())
pr_info("DB8500: version 2.0\n");
else
pr_warning("ASIC: UNKNOWN SILICON VERSION!\n");
if (cpu_is_u8500ed()) if (cpu_is_u8500ed())
dma40_u8500ed_fixup(); dma40_u8500ed_fixup();
......
...@@ -23,37 +23,25 @@ ...@@ -23,37 +23,25 @@
#include "clock.h" #include "clock.h"
static struct map_desc ux500_io_desc[] __initdata = { #ifdef CONFIG_CACHE_L2X0
__IO_DEV_DESC(UX500_UART0_BASE, SZ_4K), static void __iomem *l2x0_base;
__IO_DEV_DESC(UX500_UART2_BASE, SZ_4K), #endif
__IO_DEV_DESC(UX500_GIC_CPU_BASE, SZ_4K),
__IO_DEV_DESC(UX500_GIC_DIST_BASE, SZ_4K),
__IO_DEV_DESC(UX500_L2CC_BASE, SZ_4K),
__IO_DEV_DESC(UX500_TWD_BASE, SZ_4K),
__IO_DEV_DESC(UX500_SCU_BASE, SZ_4K),
__IO_DEV_DESC(UX500_CLKRST1_BASE, SZ_4K),
__IO_DEV_DESC(UX500_CLKRST2_BASE, SZ_4K),
__IO_DEV_DESC(UX500_CLKRST3_BASE, SZ_4K),
__IO_DEV_DESC(UX500_CLKRST5_BASE, SZ_4K),
__IO_DEV_DESC(UX500_CLKRST6_BASE, SZ_4K),
__IO_DEV_DESC(UX500_MTU0_BASE, SZ_4K),
__IO_DEV_DESC(UX500_MTU1_BASE, SZ_4K),
__IO_DEV_DESC(UX500_BACKUPRAM0_BASE, SZ_8K),
};
void __init ux500_map_io(void)
{
iotable_init(ux500_io_desc, ARRAY_SIZE(ux500_io_desc));
}
void __init ux500_init_irq(void) void __init ux500_init_irq(void)
{ {
gic_init(0, 29, __io_address(UX500_GIC_DIST_BASE), void __iomem *dist_base;
__io_address(UX500_GIC_CPU_BASE)); void __iomem *cpu_base;
if (cpu_is_u5500()) {
dist_base = __io_address(U5500_GIC_DIST_BASE);
cpu_base = __io_address(U5500_GIC_CPU_BASE);
} else if (cpu_is_u8500()) {
dist_base = __io_address(U8500_GIC_DIST_BASE);
cpu_base = __io_address(U8500_GIC_CPU_BASE);
} else
ux500_unknown_soc();
gic_init(0, 29, dist_base, cpu_base);
/* /*
* Init clocks here so that they are available for system timer * Init clocks here so that they are available for system timer
...@@ -74,7 +62,8 @@ static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask) ...@@ -74,7 +62,8 @@ static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
static inline void ux500_cache_sync(void) static inline void ux500_cache_sync(void)
{ {
void __iomem *base = __io_address(UX500_L2CC_BASE); void __iomem *base = l2x0_base;
writel_relaxed(0, base + L2X0_CACHE_SYNC); writel_relaxed(0, base + L2X0_CACHE_SYNC);
ux500_cache_wait(base + L2X0_CACHE_SYNC, 1); ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
} }
...@@ -96,20 +85,23 @@ static void ux500_l2x0_disable(void) ...@@ -96,20 +85,23 @@ static void ux500_l2x0_disable(void)
*/ */
static void ux500_l2x0_inv_all(void) static void ux500_l2x0_inv_all(void)
{ {
void __iomem *l2x0_base = __io_address(UX500_L2CC_BASE); void __iomem *base = l2x0_base;
uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */ uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */
/* invalidate all ways */ /* invalidate all ways */
writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); writel_relaxed(l2x0_way_mask, base + L2X0_INV_WAY);
ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask); ux500_cache_wait(base + L2X0_INV_WAY, l2x0_way_mask);
ux500_cache_sync(); ux500_cache_sync();
} }
static int ux500_l2x0_init(void) static int ux500_l2x0_init(void)
{ {
void __iomem *l2x0_base; if (cpu_is_u5500())
l2x0_base = __io_address(U5500_L2CC_BASE);
l2x0_base = __io_address(UX500_L2CC_BASE); else if (cpu_is_u8500())
l2x0_base = __io_address(U8500_L2CC_BASE);
else
ux500_unknown_soc();
/* 64KB way size, 8 way associativity, force WA */ /* 64KB way size, 8 way associativity, force WA */
l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff); l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
...@@ -127,13 +119,21 @@ static void __init ux500_timer_init(void) ...@@ -127,13 +119,21 @@ static void __init ux500_timer_init(void)
{ {
#ifdef CONFIG_LOCAL_TIMERS #ifdef CONFIG_LOCAL_TIMERS
/* Setup the local timer base */ /* Setup the local timer base */
twd_base = __io_address(UX500_TWD_BASE); if (cpu_is_u5500())
twd_base = __io_address(U5500_TWD_BASE);
else if (cpu_is_u8500())
twd_base = __io_address(U8500_TWD_BASE);
else
ux500_unknown_soc();
#endif #endif
/* Setup the MTU base */ if (cpu_is_u5500())
if (cpu_is_u8500ed()) mtu_base = __io_address(U5500_MTU0_BASE);
else if (cpu_is_u8500ed())
mtu_base = __io_address(U8500_MTU0_BASE_ED); mtu_base = __io_address(U8500_MTU0_BASE_ED);
else if (cpu_is_u8500())
mtu_base = __io_address(U8500_MTU0_BASE);
else else
mtu_base = __io_address(UX500_MTU0_BASE); ux500_unknown_soc();
nmdk_timer_init(); nmdk_timer_init();
} }
......
/*
* Copyright (C) ST-Ericsson SA 2010
*
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
* License terms: GNU General Public License (GPL) version 2
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <asm/cputype.h>
#include <asm/tlbflush.h>
#include <asm/cacheflush.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/setup.h>
struct dbx500_asic_id dbx500_id;
static unsigned int ux500_read_asicid(phys_addr_t addr)
{
phys_addr_t base = addr & ~0xfff;
struct map_desc desc = {
.virtual = IO_ADDRESS(base),
.pfn = __phys_to_pfn(base),
.length = SZ_16K,
.type = MT_DEVICE,
};
iotable_init(&desc, 1);
/* As in devicemaps_init() */
local_flush_tlb_all();
flush_cache_all();
return readl(__io_address(addr));
}
static void ux500_print_soc_info(unsigned int asicid)
{
unsigned int rev = dbx500_revision();
pr_info("DB%4x ", dbx500_partnumber());
if (rev == 0x01)
pr_cont("Early Drop");
else if (rev >= 0xA0)
pr_cont("v%d.%d" , (rev >> 4) - 0xA + 1, rev & 0xf);
else
pr_cont("Unknown");
pr_cont(" [%#010x]\n", asicid);
}
static unsigned int partnumber(unsigned int asicid)
{
return (asicid >> 8) & 0xffff;
}
/*
* SOC MIDR ASICID ADDRESS ASICID VALUE
* DB8500ed 0x410fc090 0x9001FFF4 0x00850001
* DB8500v1 0x411fc091 0x9001FFF4 0x008500A0
* DB8500v1.1 0x411fc091 0x9001FFF4 0x008500A1
* DB8500v2 0x412fc091 0x9001DBF4 0x008500B0
* DB5500v1 0x412fc091 0x9001FFF4 0x005500A0
*/
void __init ux500_map_io(void)
{
unsigned int cpuid = read_cpuid_id();
unsigned int asicid = 0;
phys_addr_t addr = 0;
switch (cpuid) {
case 0x410fc090: /* DB8500ed */
case 0x411fc091: /* DB8500v1 */
addr = 0x9001FFF4;
break;
case 0x412fc091: /* DB8500v2 / DB5500v1 */
asicid = ux500_read_asicid(0x9001DBF4);
if (partnumber(asicid) == 0x8500)
/* DB8500v2 */
break;
/* DB5500v1 */
addr = 0x9001FFF4;
break;
}
if (addr)
asicid = ux500_read_asicid(addr);
if (!asicid) {
pr_err("Unable to identify SoC\n");
ux500_unknown_soc();
}
dbx500_id.process = asicid >> 24;
dbx500_id.partnumber = partnumber(asicid);
dbx500_id.revision = asicid & 0xff;
ux500_print_soc_info(asicid);
}
...@@ -14,7 +14,24 @@ ...@@ -14,7 +14,24 @@
#error Invalid Ux500 debug UART #error Invalid Ux500 debug UART
#endif #endif
#define __UX500_UART(n) UX500_UART##n##_BASE /*
* DEBUG_LL only works if only one SOC is built in. We don't use #else below
* in order to get "__UX500_UART redefined" warnings if more than one SOC is
* built, so that there's some hint during the build that something is wrong.
*/
#ifdef CONFIG_UX500_SOC_DB5500
#define __UX500_UART(n) U5500_UART##n##_BASE
#endif
#ifdef CONFIG_UX500_SOC_DB8500
#define __UX500_UART(n) U8500_UART##n##_BASE
#endif
#ifndef __UX500_UART
#error Unknown SOC
#endif
#define UX500_UART(n) __UX500_UART(n) #define UX500_UART(n) __UX500_UART(n)
#define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART) #define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART)
......
...@@ -11,15 +11,10 @@ ...@@ -11,15 +11,10 @@
* warranty of any kind, whether express or implied. * warranty of any kind, whether express or implied.
*/ */
#include <mach/hardware.h> #include <mach/hardware.h>
#define HAVE_GET_IRQNR_PREAMBLE
#include <asm/hardware/entry-macro-gic.S> #include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq .macro disable_fiq
.endm .endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =IO_ADDRESS(UX500_GIC_CPU_BASE)
.endm
.macro arch_ret_to_user, tmp1, tmp2 .macro arch_ret_to_user, tmp1, tmp2
.endm .endm
...@@ -29,118 +29,12 @@ ...@@ -29,118 +29,12 @@
#include <mach/db8500-regs.h> #include <mach/db8500-regs.h>
#include <mach/db5500-regs.h> #include <mach/db5500-regs.h>
#ifdef CONFIG_UX500_SOC_DB8500
#define UX500(periph) U8500_##periph##_BASE
#elif defined(CONFIG_UX500_SOC_DB5500)
#define UX500(periph) U5500_##periph##_BASE
#endif
#define UX500_BACKUPRAM0_BASE UX500(BACKUPRAM0)
#define UX500_BACKUPRAM1_BASE UX500(BACKUPRAM1)
#define UX500_B2R2_BASE UX500(B2R2)
#define UX500_CLKRST1_BASE UX500(CLKRST1)
#define UX500_CLKRST2_BASE UX500(CLKRST2)
#define UX500_CLKRST3_BASE UX500(CLKRST3)
#define UX500_CLKRST5_BASE UX500(CLKRST5)
#define UX500_CLKRST6_BASE UX500(CLKRST6)
#define UX500_DMA_BASE UX500(DMA)
#define UX500_FSMC_BASE UX500(FSMC)
#define UX500_GIC_CPU_BASE UX500(GIC_CPU)
#define UX500_GIC_DIST_BASE UX500(GIC_DIST)
#define UX500_I2C1_BASE UX500(I2C1)
#define UX500_I2C2_BASE UX500(I2C2)
#define UX500_I2C3_BASE UX500(I2C3)
#define UX500_L2CC_BASE UX500(L2CC)
#define UX500_MCDE_BASE UX500(MCDE)
#define UX500_MTU0_BASE UX500(MTU0)
#define UX500_MTU1_BASE UX500(MTU1)
#define UX500_PRCMU_BASE UX500(PRCMU)
#define UX500_RNG_BASE UX500(RNG)
#define UX500_RTC_BASE UX500(RTC)
#define UX500_SCU_BASE UX500(SCU)
#define UX500_SDI0_BASE UX500(SDI0)
#define UX500_SDI1_BASE UX500(SDI1)
#define UX500_SDI2_BASE UX500(SDI2)
#define UX500_SDI3_BASE UX500(SDI3)
#define UX500_SDI4_BASE UX500(SDI4)
#define UX500_SPI0_BASE UX500(SPI0)
#define UX500_SPI1_BASE UX500(SPI1)
#define UX500_SPI2_BASE UX500(SPI2)
#define UX500_SPI3_BASE UX500(SPI3)
#define UX500_SIA_BASE UX500(SIA)
#define UX500_SVA_BASE UX500(SVA)
#define UX500_TWD_BASE UX500(TWD)
#define UX500_UART0_BASE UX500(UART0)
#define UX500_UART1_BASE UX500(UART1)
#define UX500_UART2_BASE UX500(UART2)
#define UX500_USBOTG_BASE UX500(USBOTG)
/* ST-Ericsson modified pl022 id */ /* ST-Ericsson modified pl022 id */
#define SSP_PER_ID 0x01080022 #define SSP_PER_ID 0x01080022
#ifndef __ASSEMBLY__ #ifndef __ASSEMBLY__
#include <asm/cputype.h> #include <mach/id.h>
static inline bool cpu_is_u8500(void)
{
#ifdef CONFIG_UX500_SOC_DB8500
return 1;
#else
return 0;
#endif
}
#define CPUID_DB8500ED 0x410fc090
#define CPUID_DB8500V1 0x411fc091
#define CPUID_DB8500V2 0x412fc091
static inline bool cpu_is_u8500ed(void)
{
return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500ED);
}
static inline bool cpu_is_u8500v1(void)
{
return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500V1);
}
static inline bool cpu_is_u8500v2(void)
{
return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500V2);
}
#ifdef CONFIG_UX500_SOC_DB8500
bool cpu_is_u8500v10(void);
bool cpu_is_u8500v11(void);
bool cpu_is_u8500v20(void);
#else
static inline bool cpu_is_u8500v10(void) { return false; }
static inline bool cpu_is_u8500v11(void) { return false; }
static inline bool cpu_is_u8500v20(void) { return false; }
#endif
static inline bool cpu_is_u5500(void)
{
#ifdef CONFIG_UX500_SOC_DB5500
return 1;
#else
return 0;
#endif
}
#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) #define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
......
/*
* Copyright (C) ST-Ericsson SA 2010
*
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
* License terms: GNU General Public License (GPL) version 2
*/
#ifndef __MACH_UX500_ID
#define __MACH_UX500_ID
/**
* struct dbx500_asic_id - fields of the ASIC ID
* @process: the manufacturing process, 0x40 is 40 nm 0x00 is "standard"
* @partnumber: hithereto 0x8500 for DB8500
* @revision: version code in the series
*/
struct dbx500_asic_id {
u16 partnumber;
u8 revision;
u8 process;
};
extern struct dbx500_asic_id dbx500_id;
static inline unsigned int __attribute_const__ dbx500_partnumber(void)
{
return dbx500_id.partnumber;
}
static inline unsigned int __attribute_const__ dbx500_revision(void)
{
return dbx500_id.revision;
}
/*
* SOCs
*/
static inline bool __attribute_const__ cpu_is_u8500(void)
{
return dbx500_partnumber() == 0x8500;
}
static inline bool __attribute_const__ cpu_is_u5500(void)
{
return dbx500_partnumber() == 0x5500;
}
/*
* 8500 revisions
*/
static inline bool __attribute_const__ cpu_is_u8500ed(void)
{
return cpu_is_u8500() && dbx500_revision() == 0x00;
}
static inline bool __attribute_const__ cpu_is_u8500v1(void)
{
return cpu_is_u8500() && (dbx500_revision() & 0xf0) == 0xA0;
}
static inline bool __attribute_const__ cpu_is_u8500v10(void)
{
return cpu_is_u8500() && dbx500_revision() == 0xA0;
}
static inline bool __attribute_const__ cpu_is_u8500v11(void)
{
return cpu_is_u8500() && dbx500_revision() == 0xA1;
}
static inline bool __attribute_const__ cpu_is_u8500v2(void)
{
return cpu_is_u8500() && ((dbx500_revision() & 0xf0) == 0xB0);
}
#define ux500_unknown_soc() BUG()
#endif
...@@ -36,7 +36,7 @@ ...@@ -36,7 +36,7 @@
/* This will be overridden by board-specific irq headers */ /* This will be overridden by board-specific irq headers */
#define IRQ_BOARD_END IRQ_BOARD_START #define IRQ_BOARD_END IRQ_BOARD_START
#ifdef CONFIG_MACH_U8500_MOP #ifdef CONFIG_MACH_U8500
#include <mach/irqs-board-mop500.h> #include <mach/irqs-board-mop500.h>
#endif #endif
......
...@@ -14,7 +14,7 @@ ...@@ -14,7 +14,7 @@
#include <asm/mach/time.h> #include <asm/mach/time.h>
#include <linux/init.h> #include <linux/init.h>
extern void __init ux500_map_io(void); void __init ux500_map_io(void);
extern void __init u5500_map_io(void); extern void __init u5500_map_io(void);
extern void __init u8500_map_io(void); extern void __init u8500_map_io(void);
......
...@@ -12,6 +12,8 @@ ...@@ -12,6 +12,8 @@
#include <linux/io.h> #include <linux/io.h>
#include <linux/slab.h> #include <linux/slab.h>
#include <mach/id.h>
#define MODEM_INTCON_BASE_ADDR 0xBFFD3000 #define MODEM_INTCON_BASE_ADDR 0xBFFD3000
#define MODEM_INTCON_SIZE 0xFFF #define MODEM_INTCON_SIZE 0xFFF
...@@ -101,6 +103,9 @@ static int modem_irq_init(void) ...@@ -101,6 +103,9 @@ static int modem_irq_init(void)
static struct irq_chip modem_irq_chip; static struct irq_chip modem_irq_chip;
struct modem_irq *mi; struct modem_irq *mi;
if (!cpu_is_u5500())
return -ENODEV;
pr_info("modem_irq: Set up IRQ handler for incoming modem IRQ %d\n", pr_info("modem_irq: Set up IRQ handler for incoming modem IRQ %d\n",
IRQ_DB5500_MODEM); IRQ_DB5500_MODEM);
......
...@@ -20,6 +20,7 @@ ...@@ -20,6 +20,7 @@
#include <asm/cacheflush.h> #include <asm/cacheflush.h>
#include <asm/smp_scu.h> #include <asm/smp_scu.h>
#include <mach/hardware.h> #include <mach/hardware.h>
#include <mach/setup.h>
/* /*
* control for which core is the next to come out of the secondary * control for which core is the next to come out of the secondary
...@@ -40,6 +41,18 @@ static void write_pen_release(int val) ...@@ -40,6 +41,18 @@ static void write_pen_release(int val)
outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
} }
static void __iomem *scu_base_addr(void)
{
if (cpu_is_u5500())
return __io_address(U5500_SCU_BASE);
else if (cpu_is_u8500())
return __io_address(U8500_SCU_BASE);
else
ux500_unknown_soc();
return NULL;
}
static DEFINE_SPINLOCK(boot_lock); static DEFINE_SPINLOCK(boot_lock);
void __cpuinit platform_secondary_init(unsigned int cpu) void __cpuinit platform_secondary_init(unsigned int cpu)
...@@ -100,21 +113,28 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) ...@@ -100,21 +113,28 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
static void __init wakeup_secondary(void) static void __init wakeup_secondary(void)
{ {
void __iomem *backupram;
if (cpu_is_u5500())
backupram = __io_address(U5500_BACKUPRAM0_BASE);
else if (cpu_is_u8500())
backupram = __io_address(U8500_BACKUPRAM0_BASE);
else
ux500_unknown_soc();
/* /*
* write the address of secondary startup into the backup ram register * write the address of secondary startup into the backup ram register
* at offset 0x1FF4, then write the magic number 0xA1FEED01 to the * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
* backup ram register at offset 0x1FF0, which is what boot rom code * backup ram register at offset 0x1FF0, which is what boot rom code
* is waiting for. This would wake up the secondary core from WFE * is waiting for. This would wake up the secondary core from WFE
*/ */
#define U8500_CPU1_JUMPADDR_OFFSET 0x1FF4 #define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4
__raw_writel(virt_to_phys(u8500_secondary_startup), __raw_writel(virt_to_phys(u8500_secondary_startup),
__io_address(UX500_BACKUPRAM0_BASE) + backupram + UX500_CPU1_JUMPADDR_OFFSET);
U8500_CPU1_JUMPADDR_OFFSET);
#define U8500_CPU1_WAKEMAGIC_OFFSET 0x1FF0 #define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
__raw_writel(0xA1FEED01, __raw_writel(0xA1FEED01,
__io_address(UX500_BACKUPRAM0_BASE) + backupram + UX500_CPU1_WAKEMAGIC_OFFSET);
U8500_CPU1_WAKEMAGIC_OFFSET);
/* make sure write buffer is drained */ /* make sure write buffer is drained */
mb(); mb();
...@@ -126,9 +146,10 @@ static void __init wakeup_secondary(void) ...@@ -126,9 +146,10 @@ static void __init wakeup_secondary(void)
*/ */
void __init smp_init_cpus(void) void __init smp_init_cpus(void)
{ {
void __iomem *scu_base = scu_base_addr();
unsigned int i, ncores; unsigned int i, ncores;
ncores = scu_get_core_count(__io_address(UX500_SCU_BASE)); ncores = scu_base ? scu_get_core_count(scu_base) : 1;
/* sanity check */ /* sanity check */
if (ncores > NR_CPUS) { if (ncores > NR_CPUS) {
...@@ -154,6 +175,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) ...@@ -154,6 +175,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
for (i = 0; i < max_cpus; i++) for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true); set_cpu_present(i, true);
scu_enable(__io_address(UX500_SCU_BASE)); scu_enable(scu_base_addr());
wakeup_secondary(); wakeup_secondary();
} }
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment