arm64: dts: mt8173: fix some indentation

Fix indentation nits to make mt8173.dtsi more consistent.
Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

arch/arm64/boot/dts/mediatek/mt8173.dtsi

@@ -91,13 +91,13 @@ timer {
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&gic>;
 		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14
-			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11
-			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10
-			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	soc {
@@ -131,7 +131,7 @@ syscfg_pctl_a: syscfg_pctl_a@10005000 {
 
 		sysirq: intpol-controller@10200620 {
 			compatible = "mediatek,mt8173-sysirq",
-					"mediatek,mt6577-sysirq";
+				     "mediatek,mt6577-sysirq";
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			interrupt-parent = <&gic>;
@@ -153,7 +153,7 @@ gic: interrupt-controller@10220000 {
 
 		uart0: serial@11002000 {
 			compatible = "mediatek,mt8173-uart",
-					"mediatek,mt6577-uart";
+				     "mediatek,mt6577-uart";
 			reg = <0 0x11002000 0 0x400>;
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&uart_clk>;
@@ -162,7 +162,7 @@ uart0: serial@11002000 {
 
 		uart1: serial@11003000 {
 			compatible = "mediatek,mt8173-uart",
-					"mediatek,mt6577-uart";
+				     "mediatek,mt6577-uart";
 			reg = <0 0x11003000 0 0x400>;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&uart_clk>;
@@ -171,7 +171,7 @@ uart1: serial@11003000 {
 
 		uart2: serial@11004000 {
 			compatible = "mediatek,mt8173-uart",
-					"mediatek,mt6577-uart";
+				     "mediatek,mt6577-uart";
 			reg = <0 0x11004000 0 0x400>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&uart_clk>;
@@ -180,13 +180,12 @@ uart2: serial@11004000 {
 
 		uart3: serial@11005000 {
 			compatible = "mediatek,mt8173-uart",
-					"mediatek,mt6577-uart";
+				     "mediatek,mt6577-uart";
 			reg = <0 0x11005000 0 0x400>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&uart_clk>;
 			status = "disabled";
 		};
 	};
-
 };