Commit e9cfa167 authored by Dirk Teurlings's avatar Dirk Teurlings Committed by Nicolas Pitre

[ARM] Orion5x: add GPIO LED and buttons for wrt350n v2

Signed-off-by: default avatarDirk Teurlings <dirk@upexia.nl>
Signed-off-by: default avatarLennert Buytenhek <buytenh@marvell.com>
Signed-off-by: default avatarNicolas Pitre <nico@marvell.com>
parent 81143d2a
......@@ -15,6 +15,9 @@
#include <linux/mtd/physmap.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <linux/leds.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
......@@ -24,6 +27,80 @@
#include "common.h"
#include "mpp.h"
/*
* LEDs attached to GPIO
*/
static struct gpio_led wrt350n_v2_led_pins[] = {
{
.name = "wrt350nv2:green:power",
.gpio = 0,
.active_low = 1,
}, {
.name = "wrt350nv2:green:security",
.gpio = 1,
.active_low = 1,
}, {
.name = "wrt350nv2:orange:power",
.gpio = 5,
.active_low = 1,
}, {
.name = "wrt350nv2:green:usb",
.gpio = 6,
.active_low = 1,
}, {
.name = "wrt350nv2:green:wireless",
.gpio = 7,
.active_low = 1,
},
};
static struct gpio_led_platform_data wrt350n_v2_led_data = {
.leds = wrt350n_v2_led_pins,
.num_leds = ARRAY_SIZE(wrt350n_v2_led_pins),
};
static struct platform_device wrt350n_v2_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &wrt350n_v2_led_data,
},
};
/*
* Buttons attached to GPIO
*/
static struct gpio_keys_button wrt350n_v2_buttons[] = {
{
.code = KEY_RESTART,
.gpio = 3,
.desc = "Reset Button",
.active_low = 1,
}, {
.code = KEY_WLAN,
.gpio = 2,
.desc = "WPS Button",
.active_low = 1,
},
};
static struct gpio_keys_platform_data wrt350n_v2_button_data = {
.buttons = wrt350n_v2_buttons,
.nbuttons = ARRAY_SIZE(wrt350n_v2_buttons),
};
static struct platform_device wrt350n_v2_button_device = {
.name = "gpio-keys",
.id = -1,
.num_resources = 0,
.dev = {
.platform_data = &wrt350n_v2_button_data,
},
};
/*
* General setup
*/
static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = {
{ 0, MPP_GPIO }, /* Power LED green (0=on) */
{ 1, MPP_GPIO }, /* Security LED (0=on) */
......@@ -140,6 +217,8 @@ static void __init wrt350n_v2_init(void)
orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
WRT350N_V2_NOR_BOOT_SIZE);
platform_device_register(&wrt350n_v2_nor_flash);
platform_device_register(&wrt350n_v2_leds);
platform_device_register(&wrt350n_v2_button_device);
}
static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment