Merge branches 'for-rc' and 'thermal-core' into next

drivers/thermal/Kconfig

@@ -326,84 +326,6 @@ config DA9062_THERMAL
 	  zone.
 	  Compatible with the DA9062 and DA9061 PMICs.
 
-config INTEL_POWERCLAMP
-	tristate "Intel PowerClamp idle injection driver"
-	depends on THERMAL
-	depends on X86
-	depends on CPU_SUP_INTEL
-	help
-	  Enable this to enable Intel PowerClamp idle injection driver. This
-	  enforce idle time which results in more package C-state residency. The
-	  user interface is exposed via generic thermal framework.
-
-config X86_PKG_TEMP_THERMAL
-	tristate "X86 package temperature thermal driver"
-	depends on X86_THERMAL_VECTOR
-	select THERMAL_GOV_USER_SPACE
-	select THERMAL_WRITABLE_TRIPS
-	default m
-	help
-	  Enable this to register CPU digital sensor for package temperature as
-	  thermal zone. Each package will have its own thermal zone. There are
-	  two trip points which can be set by user to get notifications via thermal
-	  notification methods.
-
-config INTEL_SOC_DTS_IOSF_CORE
-	tristate
-	depends on X86 && PCI
-	select IOSF_MBI
-	help
-	  This is becoming a common feature for Intel SoCs to expose the additional
-	  digital temperature sensors (DTSs) using side band interface (IOSF). This
-	  implements the common set of helper functions to register, get temperature
-	  and get/set thresholds on DTSs.
-
-config INTEL_SOC_DTS_THERMAL
-	tristate "Intel SoCs DTS thermal driver"
-	depends on X86 && PCI && ACPI
-	select INTEL_SOC_DTS_IOSF_CORE
-	select THERMAL_WRITABLE_TRIPS
-	help
-	  Enable this to register Intel SoCs (e.g. Bay Trail) platform digital
-	  temperature sensor (DTS). These SoCs have two additional DTSs in
-	  addition to DTSs on CPU cores. Each DTS will be registered as a
-	  thermal zone. There are two trip points. One of the trip point can
-	  be set by user mode programs to get notifications via Linux thermal
-	  notification methods.The other trip is a critical trip point, which
-	  was set by the driver based on the TJ MAX temperature.
-
-config INTEL_QUARK_DTS_THERMAL
-	tristate "Intel Quark DTS thermal driver"
-	depends on X86_INTEL_QUARK
-	help
-	  Enable this to register Intel Quark SoC (e.g. X1000) platform digital
-	  temperature sensor (DTS). For X1000 SoC, it has one on-die DTS.
-	  The DTS will be registered as a thermal zone. There are two trip points:
-	  hot & critical. The critical trip point default value is set by
-	  underlying BIOS/Firmware.
-
-menu "ACPI INT340X thermal drivers"
-source drivers/thermal/int340x_thermal/Kconfig
-endmenu
-
-config INTEL_BXT_PMIC_THERMAL
-	tristate "Intel Broxton PMIC thermal driver"
-	depends on X86 && INTEL_SOC_PMIC_BXTWC && REGMAP
-	help
-	  Select this driver for Intel Broxton PMIC with ADC channels monitoring
-	  system temperature measurements and alerts.
-	  This driver is used for monitoring the ADC channels of PMIC and handles
-	  the alert trip point interrupts and notifies the thermal framework with
-	  the trip point and temperature details of the zone.
-
-config INTEL_PCH_THERMAL
-	tristate "Intel PCH Thermal Reporting Driver"
-	depends on X86 && PCI
-	help
-	  Enable this to support thermal reporting on certain intel PCHs.
-	  Thermal reporting device will provide temperature reading,
-	  programmable trip points and other information.
-
 config MTK_THERMAL
 	tristate "Temperature sensor driver for mediatek SoCs"
 	depends on ARCH_MEDIATEK || COMPILE_TEST
@@ -415,6 +337,11 @@ config MTK_THERMAL
 	  Enable this option if you want to have support for thermal management
 	  controller present in Mediatek SoCs
 
+menu "Intel thermal drivers"
+depends on X86 || X86_INTEL_QUARK || COMPILE_TEST
+source "drivers/thermal/intel/Kconfig"
+endmenu
+
 menu "Broadcom thermal drivers"
 depends on ARCH_BCM || ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST
 source "drivers/thermal/broadcom/Kconfig"
@@ -447,17 +374,6 @@ config TANGO_THERMAL
 
 source "drivers/thermal/tegra/Kconfig"
 
-config QCOM_SPMI_TEMP_ALARM
-	tristate "Qualcomm SPMI PMIC Temperature Alarm"
-	depends on OF && SPMI && IIO
-	select REGMAP_SPMI
-	help
-	  This enables a thermal sysfs driver for Qualcomm plug-and-play (QPNP)
-	  PMIC devices. It shows up in sysfs as a thermal sensor with multiple
-	  trip points. The temperature reported by the thermal sensor reflects the
-	  real time die temperature if an ADC is present or an estimate of the
-	  temperature based upon the over temperature stage value.
-
 config GENERIC_ADC_THERMAL
 	tristate "Generic ADC based thermal sensor"
 	depends on IIO

drivers/thermal/Makefile

@@ -29,7 +29,6 @@ thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o
 
 # platform thermal drivers
 obj-y				+= broadcom/
-obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM)	+= qcom-spmi-temp-alarm.o
 obj-$(CONFIG_SPEAR_THERMAL)	+= spear_thermal.o
 obj-$(CONFIG_ROCKCHIP_THERMAL)	+= rockchip_thermal.o
 obj-$(CONFIG_RCAR_THERMAL)	+= rcar_thermal.o
@@ -44,15 +43,8 @@ obj-$(CONFIG_IMX_THERMAL)	+= imx_thermal.o
 obj-$(CONFIG_MAX77620_THERMAL)	+= max77620_thermal.o
 obj-$(CONFIG_QORIQ_THERMAL)	+= qoriq_thermal.o
 obj-$(CONFIG_DA9062_THERMAL)	+= da9062-thermal.o
-obj-$(CONFIG_INTEL_POWERCLAMP)	+= intel_powerclamp.o
-obj-$(CONFIG_X86_PKG_TEMP_THERMAL)	+= x86_pkg_temp_thermal.o
-obj-$(CONFIG_INTEL_SOC_DTS_IOSF_CORE)	+= intel_soc_dts_iosf.o
-obj-$(CONFIG_INTEL_SOC_DTS_THERMAL)	+= intel_soc_dts_thermal.o
-obj-$(CONFIG_INTEL_QUARK_DTS_THERMAL)	+= intel_quark_dts_thermal.o
+obj-y				+= intel/
 obj-$(CONFIG_TI_SOC_THERMAL)	+= ti-soc-thermal/
-obj-$(CONFIG_INT340X_THERMAL)  += int340x_thermal/
-obj-$(CONFIG_INTEL_BXT_PMIC_THERMAL) += intel_bxt_pmic_thermal.o
-obj-$(CONFIG_INTEL_PCH_THERMAL)	+= intel_pch_thermal.o
 obj-y				+= st/
 obj-$(CONFIG_QCOM_TSENS)	+= qcom/
 obj-y				+= tegra/

drivers/thermal/intel/Kconfig

+config INTEL_POWERCLAMP
+	tristate "Intel PowerClamp idle injection driver"
+	depends on THERMAL
+	depends on X86
+	depends on CPU_SUP_INTEL
+	help
+	  Enable this to enable Intel PowerClamp idle injection driver. This
+	  enforce idle time which results in more package C-state residency. The
+	  user interface is exposed via generic thermal framework.
+
+config X86_PKG_TEMP_THERMAL
+	tristate "X86 package temperature thermal driver"
+	depends on X86_THERMAL_VECTOR
+	select THERMAL_GOV_USER_SPACE
+	select THERMAL_WRITABLE_TRIPS
+	default m
+	help
+	  Enable this to register CPU digital sensor for package temperature as
+	  thermal zone. Each package will have its own thermal zone. There are
+	  two trip points which can be set by user to get notifications via thermal
+	  notification methods.
+
+config INTEL_SOC_DTS_IOSF_CORE
+	tristate
+	depends on X86 && PCI
+	select IOSF_MBI
+	help
+	  This is becoming a common feature for Intel SoCs to expose the additional
+	  digital temperature sensors (DTSs) using side band interface (IOSF). This
+	  implements the common set of helper functions to register, get temperature
+	  and get/set thresholds on DTSs.
+
+config INTEL_SOC_DTS_THERMAL
+	tristate "Intel SoCs DTS thermal driver"
+	depends on X86 && PCI && ACPI
+	select INTEL_SOC_DTS_IOSF_CORE
+	select THERMAL_WRITABLE_TRIPS
+	help
+	  Enable this to register Intel SoCs (e.g. Bay Trail) platform digital
+	  temperature sensor (DTS). These SoCs have two additional DTSs in
+	  addition to DTSs on CPU cores. Each DTS will be registered as a
+	  thermal zone. There are two trip points. One of the trip point can
+	  be set by user mode programs to get notifications via Linux thermal
+	  notification methods.The other trip is a critical trip point, which
+	  was set by the driver based on the TJ MAX temperature.
+
+config INTEL_QUARK_DTS_THERMAL
+	tristate "Intel Quark DTS thermal driver"
+	depends on X86_INTEL_QUARK
+	help
+	  Enable this to register Intel Quark SoC (e.g. X1000) platform digital
+	  temperature sensor (DTS). For X1000 SoC, it has one on-die DTS.
+	  The DTS will be registered as a thermal zone. There are two trip points:
+	  hot & critical. The critical trip point default value is set by
+	  underlying BIOS/Firmware.
+
+menu "ACPI INT340X thermal drivers"
+source drivers/thermal/intel/int340x_thermal/Kconfig
+endmenu
+
+config INTEL_BXT_PMIC_THERMAL
+	tristate "Intel Broxton PMIC thermal driver"
+	depends on X86 && INTEL_SOC_PMIC_BXTWC && REGMAP
+	help
+	  Select this driver for Intel Broxton PMIC with ADC channels monitoring
+	  system temperature measurements and alerts.
+	  This driver is used for monitoring the ADC channels of PMIC and handles
+	  the alert trip point interrupts and notifies the thermal framework with
+	  the trip point and temperature details of the zone.
+
+config INTEL_PCH_THERMAL
+	tristate "Intel PCH Thermal Reporting Driver"
+	depends on X86 && PCI
+	help
+	  Enable this to support thermal reporting on certain intel PCHs.
+	  Thermal reporting device will provide temperature reading,
+	  programmable trip points and other information.

drivers/thermal/intel/Makefile

+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for various Intel thermal drivers.
+
+obj-$(CONFIG_INTEL_POWERCLAMP)	+= intel_powerclamp.o
+obj-$(CONFIG_X86_PKG_TEMP_THERMAL)	+= x86_pkg_temp_thermal.o
+obj-$(CONFIG_INTEL_SOC_DTS_IOSF_CORE)	+= intel_soc_dts_iosf.o
+obj-$(CONFIG_INTEL_SOC_DTS_THERMAL)	+= intel_soc_dts_thermal.o
+obj-$(CONFIG_INTEL_QUARK_DTS_THERMAL)	+= intel_quark_dts_thermal.o
+obj-$(CONFIG_INT340X_THERMAL)  += int340x_thermal/
+obj-$(CONFIG_INTEL_BXT_PMIC_THERMAL) += intel_bxt_pmic_thermal.o
+obj-$(CONFIG_INTEL_PCH_THERMAL)	+= intel_pch_thermal.o

drivers/thermal/int340x_thermal/int3400_thermal.c → drivers/thermal/intel/int340x_thermal/int3400_thermal.c

@@ -48,8 +48,7 @@ static ssize_t available_uuids_show(struct device *dev,
 				    struct device_attribute *attr,
 				    char *buf)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct int3400_thermal_priv *priv = platform_get_drvdata(pdev);
+	struct int3400_thermal_priv *priv = dev_get_drvdata(dev);
 	int i;
 	int length = 0;
 
@@ -68,8 +67,7 @@ static ssize_t available_uuids_show(struct device *dev,
 static ssize_t current_uuid_show(struct device *dev,
 				 struct device_attribute *devattr, char *buf)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct int3400_thermal_priv *priv = platform_get_drvdata(pdev);
+	struct int3400_thermal_priv *priv = dev_get_drvdata(dev);
 
 	if (priv->uuid_bitmap & (1 << priv->current_uuid_index))
 		return sprintf(buf, "%s\n",
@@ -82,8 +80,7 @@ static ssize_t current_uuid_store(struct device *dev,
 				  struct device_attribute *attr,
 				  const char *buf, size_t count)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct int3400_thermal_priv *priv = platform_get_drvdata(pdev);
+	struct int3400_thermal_priv *priv = dev_get_drvdata(dev);
 	int i;
 
 	for (i = 0; i < INT3400_THERMAL_MAXIMUM_UUID; ++i) {

drivers/thermal/qcom/Kconfig

@@ -9,3 +9,14 @@ config QCOM_TSENS
 	  thermal zone device via the mode file results in disabling the sensor.
 	  Also able to set threshold temperature for both hot and cold and update
 	  when a threshold is reached.
+
+config QCOM_SPMI_TEMP_ALARM
+	tristate "Qualcomm SPMI PMIC Temperature Alarm"
+	depends on OF && SPMI && IIO
+	select REGMAP_SPMI
+	help
+	  This enables a thermal sysfs driver for Qualcomm plug-and-play (QPNP)
+	  PMIC devices. It shows up in sysfs as a thermal sensor with multiple
+	  trip points. The temperature reported by the thermal sensor reflects the
+	  real time die temperature if an ADC is present or an estimate of the
+	  temperature based upon the over temperature stage value.

drivers/thermal/qcom/Makefile

 obj-$(CONFIG_QCOM_TSENS)	+= qcom_tsens.o
 qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-v2.o
+obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM)	+= qcom-spmi-temp-alarm.o

drivers/thermal/qcom-spmi-temp-alarm.c → drivers/thermal/qcom/qcom-spmi-temp-alarm.c

@@ -23,7 +23,7 @@
 #include <linux/regmap.h>
 #include <linux/thermal.h>
 
-#include "thermal_core.h"
+#include "../thermal_core.h"
 
 #define QPNP_TM_REG_TYPE		0x04
 #define QPNP_TM_REG_SUBTYPE		0x05

drivers/thermal/rockchip_thermal.c

@@ -1327,8 +1327,7 @@ static int rockchip_thermal_remove(struct platform_device *pdev)
 
 static int __maybe_unused rockchip_thermal_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct rockchip_thermal_data *thermal = platform_get_drvdata(pdev);
+	struct rockchip_thermal_data *thermal = dev_get_drvdata(dev);
 	int i;
 
 	for (i = 0; i < thermal->chip->chn_num; i++)
@@ -1346,8 +1345,7 @@ static int __maybe_unused rockchip_thermal_suspend(struct device *dev)
 
 static int __maybe_unused rockchip_thermal_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct rockchip_thermal_data *thermal = platform_get_drvdata(pdev);
+	struct rockchip_thermal_data *thermal = dev_get_drvdata(dev);
 	int i;
 	int error;
 
@@ -1376,7 +1374,7 @@ static int __maybe_unused rockchip_thermal_resume(struct device *dev)
 					      id, thermal->regs,
 					      thermal->tshut_temp);
 		if (error)
-			dev_err(&pdev->dev, "%s: invalid tshut=%d, error=%d\n",
+			dev_err(dev, "%s: invalid tshut=%d, error=%d\n",
 				__func__, thermal->tshut_temp, error);
 	}
 

drivers/thermal/spear_thermal.c

@@ -56,8 +56,7 @@ static struct thermal_zone_device_ops ops = {
 
 static int __maybe_unused spear_thermal_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev);
+	struct thermal_zone_device *spear_thermal = dev_get_drvdata(dev);
 	struct spear_thermal_dev *stdev = spear_thermal->devdata;
 	unsigned int actual_mask = 0;
 
@@ -73,15 +72,14 @@ static int __maybe_unused spear_thermal_suspend(struct device *dev)
 
 static int __maybe_unused spear_thermal_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev);
+	struct thermal_zone_device *spear_thermal = dev_get_drvdata(dev);
 	struct spear_thermal_dev *stdev = spear_thermal->devdata;
 	unsigned int actual_mask = 0;
 	int ret = 0;
 
 	ret = clk_enable(stdev->clk);
 	if (ret) {
-		dev_err(&pdev->dev, "Can't enable clock\n");
+		dev_err(dev, "Can't enable clock\n");
 		return ret;
 	}
 

drivers/thermal/st/st_thermal.c

@@ -277,8 +277,7 @@ EXPORT_SYMBOL_GPL(st_thermal_unregister);
 #ifdef CONFIG_PM_SLEEP
 static int st_thermal_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct st_thermal_sensor *sensor = platform_get_drvdata(pdev);
+	struct st_thermal_sensor *sensor = dev_get_drvdata(dev);
 
 	return st_thermal_sensor_off(sensor);
 }
@@ -286,8 +285,7 @@ static int st_thermal_suspend(struct device *dev)
 static int st_thermal_resume(struct device *dev)
 {
 	int ret;
-	struct platform_device *pdev = to_platform_device(dev);
-	struct st_thermal_sensor *sensor = platform_get_drvdata(pdev);
+	struct st_thermal_sensor *sensor = dev_get_drvdata(dev);
 
 	ret = st_thermal_sensor_on(sensor);
 	if (ret)

drivers/thermal/zx2967_thermal.c

@@ -207,8 +207,7 @@ MODULE_DEVICE_TABLE(of, zx2967_thermal_id_table);
 #ifdef CONFIG_PM_SLEEP
 static int zx2967_thermal_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct zx2967_thermal_priv *priv = platform_get_drvdata(pdev);
+	struct zx2967_thermal_priv *priv = dev_get_drvdata(dev);
 
 	if (priv && priv->clk_topcrm)
 		clk_disable_unprepare(priv->clk_topcrm);
@@ -221,8 +220,7 @@ static int zx2967_thermal_suspend(struct device *dev)
 
 static int zx2967_thermal_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct zx2967_thermal_priv *priv = platform_get_drvdata(pdev);
+	struct zx2967_thermal_priv *priv = dev_get_drvdata(dev);
 	int error;
 
 	error = clk_prepare_enable(priv->clk_topcrm);