Commit eaeed5d3 authored by Steve Glendinning's avatar Steve Glendinning Committed by Paul Mundt

sh: add support for SMSC Polaris platform

Polaris is an SMSC reference platform with a SH7709S CPU and LAN9118
ethernet controller.  This patch adds support for it.

Updated following feedback from Nobuhiro Iwamatsu.
Signed-off-by: default avatarSteve Glendinning <steve.glendinning@smsc.com>
Reviewed-by: default avatarNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent 3bf50923
...@@ -261,6 +261,13 @@ config SH_CAYMAN ...@@ -261,6 +261,13 @@ config SH_CAYMAN
depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
select SYS_SUPPORTS_PCI select SYS_SUPPORTS_PCI
config SH_POLARIS
bool "SMSC Polaris"
select CPU_HAS_IPR_IRQ
depends on CPU_SUBTYPE_SH7709
help
Select if configuring for an SMSC Polaris development board
endmenu endmenu
source "arch/sh/boards/mach-r2d/Kconfig" source "arch/sh/boards/mach-r2d/Kconfig"
......
...@@ -8,3 +8,4 @@ obj-$(CONFIG_SH_URQUELL) += board-urquell.o ...@@ -8,3 +8,4 @@ obj-$(CONFIG_SH_URQUELL) += board-urquell.o
obj-$(CONFIG_SH_SHMIN) += board-shmin.o obj-$(CONFIG_SH_SHMIN) += board-shmin.o
obj-$(CONFIG_SH_EDOSK7760) += board-edosk7760.o obj-$(CONFIG_SH_EDOSK7760) += board-edosk7760.o
obj-$(CONFIG_SH_ESPT) += board-espt.o obj-$(CONFIG_SH_ESPT) += board-espt.o
obj-$(CONFIG_SH_POLARIS) += board-polaris.o
/*
* June 2006 steve.glendinning@smsc.com
*
* Polaris-specific resource declaration
*
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/smsc911x.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <asm/machvec.h>
#include <asm/heartbeat.h>
#include <cpu/gpio.h>
#include <mach-se/mach/se.h>
#define BCR2 (0xFFFFFF62)
#define WCR2 (0xFFFFFF66)
#define AREA5_WAIT_CTRL (0x1C00)
#define WAIT_STATES_10 (0x7)
static struct resource smsc911x_resources[] = {
[0] = {
.name = "smsc911x-memory",
.start = PA_EXT5,
.end = PA_EXT5 + 0x1fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.name = "smsc911x-irq",
.start = IRQ0_IRQ,
.end = IRQ0_IRQ,
.flags = IORESOURCE_IRQ,
},
};
static struct smsc911x_platform_config smsc911x_config = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
.flags = SMSC911X_USE_32BIT,
.phy_interface = PHY_INTERFACE_MODE_MII,
};
static struct platform_device smsc911x_device = {
.name = "smsc911x",
.id = 0,
.num_resources = ARRAY_SIZE(smsc911x_resources),
.resource = smsc911x_resources,
.dev = {
.platform_data = &smsc911x_config,
},
};
static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 };
static struct heartbeat_data heartbeat_data = {
.bit_pos = heartbeat_bit_pos,
.nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
.regsize = 8,
};
static struct resource heartbeat_resources[] = {
[0] = {
.start = PORT_PCDR,
.end = PORT_PCDR,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
.dev = {
.platform_data = &heartbeat_data,
},
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
static struct platform_device *polaris_devices[] __initdata = {
&smsc911x_device,
&heartbeat_device,
};
static int __init polaris_initialise(void)
{
u16 wcr, bcr_mask;
printk(KERN_INFO "Configuring Polaris external bus\n");
/* Configure area 5 with 2 wait states */
wcr = ctrl_inw(WCR2);
wcr &= (~AREA5_WAIT_CTRL);
wcr |= (WAIT_STATES_10 << 10);
ctrl_outw(wcr, WCR2);
/* Configure area 5 for 32-bit access */
bcr_mask = ctrl_inw(BCR2);
bcr_mask |= 1 << 10;
ctrl_outw(bcr_mask, BCR2);
return platform_add_devices(polaris_devices,
ARRAY_SIZE(polaris_devices));
}
arch_initcall(polaris_initialise);
static struct ipr_data ipr_irq_table[] = {
/* External IRQs */
{ IRQ0_IRQ, 0, 0, 1, }, /* IRQ0 */
{ IRQ1_IRQ, 0, 4, 1, }, /* IRQ1 */
};
static unsigned long ipr_offsets[] = {
INTC_IPRC
};
static struct ipr_desc ipr_irq_desc = {
.ipr_offsets = ipr_offsets,
.nr_offsets = ARRAY_SIZE(ipr_offsets),
.ipr_data = ipr_irq_table,
.nr_irqs = ARRAY_SIZE(ipr_irq_table),
.chip = {
.name = "sh7709-ext",
},
};
static void __init init_polaris_irq(void)
{
/* Disable all interrupts */
ctrl_outw(0, BCR_ILCRA);
ctrl_outw(0, BCR_ILCRB);
ctrl_outw(0, BCR_ILCRC);
ctrl_outw(0, BCR_ILCRD);
ctrl_outw(0, BCR_ILCRE);
ctrl_outw(0, BCR_ILCRF);
ctrl_outw(0, BCR_ILCRG);
register_ipr_controller(&ipr_irq_desc);
}
static struct sh_machine_vector mv_polaris __initmv = {
.mv_name = "Polaris",
.mv_nr_irqs = 61,
.mv_init_irq = init_polaris_irq,
};
This diff is collapsed.
...@@ -54,3 +54,4 @@ SH7763RDP SH_SH7763RDP ...@@ -54,3 +54,4 @@ SH7763RDP SH_SH7763RDP
SH7785LCR SH_SH7785LCR SH7785LCR SH_SH7785LCR
URQUELL SH_URQUELL URQUELL SH_URQUELL
ESPT SH_ESPT ESPT SH_ESPT
POLARIS SH_POLARIS
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment