Commit eb736679 authored by Ville Syrjälä's avatar Ville Syrjälä Committed by Daniel Vetter

drm/i915: Engage the DP scramble reset for pipe C on CHV

To get stable CRCs from the DP CRC source we need to reset the
scrambler for each frame. Enable the reset feature when grabbing
CRCs for pipe C on CHV. Pipes A and B were already covered due
sharing the code with VLV.

We can safely extend PIPE_SCRAMBLE_RESET_MASK to deal with CHV since
the extra bit was MBZ on the older platforms.
Signed-off-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent 16e5ab14
......@@ -3120,11 +3120,19 @@ static int vlv_pipe_crc_ctl_reg(struct drm_device *dev,
uint32_t tmp = I915_READ(PORT_DFT2_G4X);
tmp |= DC_BALANCE_RESET_VLV;
if (pipe == PIPE_A)
switch (pipe) {
case PIPE_A:
tmp |= PIPE_A_SCRAMBLE_RESET;
else
break;
case PIPE_B:
tmp |= PIPE_B_SCRAMBLE_RESET;
break;
case PIPE_C:
tmp |= PIPE_C_SCRAMBLE_RESET;
break;
default:
return -EINVAL;
}
I915_WRITE(PORT_DFT2_G4X, tmp);
}
......@@ -3213,10 +3221,19 @@ static void vlv_undo_pipe_scramble_reset(struct drm_device *dev,
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t tmp = I915_READ(PORT_DFT2_G4X);
if (pipe == PIPE_A)
switch (pipe) {
case PIPE_A:
tmp &= ~PIPE_A_SCRAMBLE_RESET;
else
break;
case PIPE_B:
tmp &= ~PIPE_B_SCRAMBLE_RESET;
break;
case PIPE_C:
tmp &= ~PIPE_C_SCRAMBLE_RESET;
break;
default:
return;
}
if (!(tmp & PIPE_SCRAMBLE_RESET_MASK))
tmp &= ~DC_BALANCE_RESET_VLV;
I915_WRITE(PORT_DFT2_G4X, tmp);
......
......@@ -2789,7 +2789,8 @@ enum punit_power_well {
#define DC_BALANCE_RESET (1 << 25)
#define PORT_DFT2_G4X (dev_priv->info.display_mmio_offset + 0x61154)
#define DC_BALANCE_RESET_VLV (1 << 31)
#define PIPE_SCRAMBLE_RESET_MASK (0x3 << 0)
#define PIPE_SCRAMBLE_RESET_MASK ((1 << 14) | (0x3 << 0))
#define PIPE_C_SCRAMBLE_RESET (1 << 14) /* chv */
#define PIPE_B_SCRAMBLE_RESET (1 << 1)
#define PIPE_A_SCRAMBLE_RESET (1 << 0)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment