staging: comedi: ni_atmio16d: use cfc_check_trigger_arg_*() helpers

Use the new helpers in the step 3 tests of atmio16d_ai_cmdtest().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/ni_atmio16d.c

@@ -271,51 +271,32 @@ static int atmio16d_ai_cmdtest(struct comedi_device *dev,
 	if (err)
 		return 2;
 
-	/* step 3: make sure arguments are trivially compatible */
+	/* Step 3: check if arguments are trivially valid */
+
+	err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
 
-	if (cmd->start_arg != 0) {
-		cmd->start_arg = 0;
-		err++;
-	}
 	if (cmd->scan_begin_src == TRIG_FOLLOW) {
 		/* internal trigger */
-		if (cmd->scan_begin_arg != 0) {
-			cmd->scan_begin_arg = 0;
-			err++;
-		}
+		err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
 	} else {
 #if 0
 		/* external trigger */
 		/* should be level/edge, hi/lo specification here */
-		if (cmd->scan_begin_arg != 0) {
-			cmd->scan_begin_arg = 0;
-			err++;
-		}
+		err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
 #endif
 	}
 
-	if (cmd->convert_arg < 10000) {
-		cmd->convert_arg = 10000;
-		err++;
-	}
+	err |= cfc_check_trigger_arg_min(&cmd->convert_arg, 10000);
 #if 0
-	if (cmd->convert_arg > SLOWEST_TIMER) {
-		cmd->convert_arg = SLOWEST_TIMER;
-		err++;
-	}
+	err |= cfc_check_trigger_arg_max(&cmd->convert_arg, SLOWEST_TIMER);
 #endif
-	if (cmd->scan_end_arg != cmd->chanlist_len) {
-		cmd->scan_end_arg = cmd->chanlist_len;
-		err++;
-	}
+
+	err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
+
 	if (cmd->stop_src == TRIG_COUNT) {
 		/* any count is allowed */
-	} else {
-		/* TRIG_NONE */
-		if (cmd->stop_arg != 0) {
-			cmd->stop_arg = 0;
-			err++;
-		}
+	} else {	/* TRIG_NONE */
+		err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
 	}
 
 	if (err)