Commit ecb8486d authored by Frank Mori Hess's avatar Frank Mori Hess Committed by Greg Kroah-Hartman

Staging: comedi: ni_pcimio: Added device id for pxi-6225.

Signed-off-by: default avatarFrank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 078a10df
......@@ -29,7 +29,7 @@ Devices: [National Instruments] PCI-MIO-16XE-50 (ni_pcimio),
PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1, PCI-MIO-16E-4, PCI-6014, PCI-6040E,
PXI-6040E, PCI-6030E, PCI-6031E, PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E,
PCI-6024E, PCI-6025E, PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E,
PCI-6110, PCI-6111, PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225,
PCI-6110, PCI-6111, PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225, PXI-6225,
PCI-6229, PCI-6250, PCI-6251, PCIe-6251, PCI-6254, PCI-6259, PCIe-6259,
PCI-6280, PCI-6281, PXI-6281, PCI-6284, PCI-6289,
PCI-6711, PXI-6711, PCI-6713, PXI-6713,
......@@ -179,6 +179,7 @@ static DEFINE_PCI_DEVICE_TABLE(ni_pci_table) = {
PCI_VENDOR_ID_NATINST, 0x70f2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
PCI_VENDOR_ID_NATINST, 0x710d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
PCI_VENDOR_ID_NATINST, 0x716c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
PCI_VENDOR_ID_NATINST, 0x716d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
PCI_VENDOR_ID_NATINST, 0x717f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
PCI_VENDOR_ID_NATINST, 0x71bc, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
PCI_VENDOR_ID_NATINST, 0x717d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
......@@ -952,6 +953,25 @@ static const struct ni_board_struct ni_boards[] = {
.caldac = {caldac_none},
.has_8255 = 0,
},
{
.device_id = 0x716d,
.name = "pxi-6225",
.n_adchan = 80,
.adbits = 16,
.ai_fifo_depth = 4095,
.gainlkup = ai_gain_622x,
.ai_speed = 4000,
.n_aochan = 2,
.aobits = 16,
.ao_fifo_depth = 8191,
.ao_range_table = &range_ni_M_622x_ao,
.reg_type = ni_reg_622x,
.ao_unipolar = 0,
.ao_speed = 1200,
.num_p0_dio_channels = 32,
.caldac = {caldac_none},
.has_8255 = 0,
},
{
.device_id = 0x70aa,
.name = "pci-6229",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment