Skip to content

L
linux
Commit ed0fe3b9 authored by Jean Tourrilhes's avatar Jean Tourrilhes Committed by Jeff Garzik
Browse files
Options

Convert hp100 net driver to PCI DMA mapping API. (fixes build)

parent 7e701c2b
Hide whitespace changes
Inline Side-by-side
Showing with 46 additions and 13 deletions
drivers/net/hp100.c
View file @ ed0fe3b9
......@@ -83,8 +83,6 @@
**
*/
#error Please convert me to Documentation/DMA-mapping.txt
#define HP100_DEFAULT_PRIORITY_TX 0
#undef HP100_DEBUG
......@@ -212,8 +210,8 @@ struct hp100_private {
hp100_ring_t rxring[MAX_RX_PDL];
hp100_ring_t txring[MAX_TX_PDL];
u_int *page_vaddr; /* Virtual address of allocated page */
u_int *page_vaddr_algn; /* Aligned virtual address of allocated page */
u_long whatever_offset; /* Offset to bus/phys/dma address */
int rxrcommit; /* # Rx PDLs commited to adapter */
int txrcommit; /* # Tx PDLs commited to adapter */
};
......@@ -350,6 +348,18 @@ static void hp100_clean_txring(struct net_device *dev);
static void hp100_RegisterDump(struct net_device *dev);
#endif
/* Conversion to new PCI API :
* Convert an address in a kernel buffer to a bus/phys/dma address.
* This work *only* for memory fragments part of lp->page_vaddr,
* because it was properly DMA allocated via pci_alloc_consistent(),
* so we just need to "retreive" the original mapping to bus/phys/dma
* address - Jean II */
static inline dma_addr_t virt_to_whatever(struct net_device *dev, u32 * ptr)
{
return ((u_long) ptr) +
((struct hp100_private *) (dev->priv))->whatever_offset;
}
/* TODO: This function should not really be needed in a good design... */
static void wait(void)
{
......@@ -627,9 +637,20 @@ static int __init hp100_probe1(struct net_device *dev, int ioaddr,
local_mode = 3;
} else if (chip == HP100_CHIPID_LASSEN &&
(lsw & (HP100_BM_WRITE | HP100_BM_READ)) == (HP100_BM_WRITE | HP100_BM_READ)) {
/* Conversion to new PCI API :
* I don't have the doc, but I assume that the card
* can map the full 32bit address space.
* Also, we can have EISA Busmaster cards (not tested),
* so beware !!! - Jean II */
if((bus == HP100_BUS_PCI) &&
(pci_set_dma_mask(pci_dev, 0xffffffff))) {
/* Gracefully fallback to shared memory */
goto busmasterfail;
}
printk("hp100: %s: Busmaster mode enabled.\n", dev->name);
hp100_outw(HP100_MEM_EN | HP100_IO_EN | HP100_RESET_LB, OPTION_LSW);
} else {
busmasterfail:
#ifdef HP100_DEBUG
printk("hp100: %s: Card not configured for BM or BM not supported with this card.\n", dev->name);
printk("hp100: %s: Trying shared memory mode.\n", dev->name);
......@@ -772,11 +793,14 @@ static int __init hp100_probe1(struct net_device *dev, int ioaddr,
* in the cards shared memory area. But currently, busmaster has been
* implemented/tested only with the lassen chip anyway... */
if (lp->mode == 1) { /* busmaster */
dma_addr_t page_baddr;
/* Get physically continous memory for TX & RX PDLs */
if ((lp->page_vaddr = kmalloc(MAX_RINGSIZE + 0x0f, GFP_KERNEL)) == NULL)
/* Conversion to new PCI API :
* Pages are always aligned and zeroed, no need to it ourself.
* Doc says should be OK for EISA bus as well - Jean II */
if ((lp->page_vaddr_algn = pci_alloc_consistent(lp->pci_dev, MAX_RINGSIZE, &page_baddr)) == NULL)
return -ENOMEM;
lp->page_vaddr_algn = ((u_int *) (((u_int) (lp->page_vaddr) + 0x0f) & ~0x0f));
memset(lp->page_vaddr, 0, MAX_RINGSIZE + 0x0f);
lp->whatever_offset = ((u_long) page_baddr) - ((u_long) lp->page_vaddr_algn);
#ifdef HP100_DEBUG_BM
printk("hp100: %s: Reserved DMA memory from 0x%x to 0x%x\n", dev->name, (u_int) lp->page_vaddr_algn, (u_int) lp->page_vaddr_algn + MAX_RINGSIZE);
......@@ -1189,7 +1213,7 @@ static void hp100_init_pdls(struct net_device *dev)
{
struct hp100_private *lp = (struct hp100_private *) dev->priv;
hp100_ring_t *ringptr;
u_int *pageptr;
u_int *pageptr; /* Warning : increment by 4 - Jean II */
int i;
#ifdef HP100_DEBUG_B
......@@ -1246,7 +1270,7 @@ static int hp100_init_rxpdl(struct net_device *dev,
dev->name, (unsigned) pdlptr);
ringptr->pdl = pdlptr + 1;
ringptr->pdl_paddr = virt_to_bus(pdlptr + 1);
ringptr->pdl_paddr = virt_to_whatever(dev, pdlptr + 1);
ringptr->skb = (void *) NULL;
/*
......@@ -1257,7 +1281,7 @@ static int hp100_init_rxpdl(struct net_device *dev,
*/
/* Note that pdlptr+1 and not pdlptr is the pointer to the PDH */
*(pdlptr + 2) = (u_int) virt_to_bus(pdlptr); /* Address Frag 1 */
*(pdlptr + 2) = (u_int) virt_to_whatever(dev, pdlptr); /* Address Frag 1 */
*(pdlptr + 3) = 4; /* Length Frag 1 */
return ((((MAX_RX_FRAG * 2 + 2) + 3) / 4) * 4);
......@@ -1272,7 +1296,7 @@ static int hp100_init_txpdl(struct net_device *dev,
printk("hp100: %s: Init txpdl: Unaligned pdlptr 0x%x.\n", dev->name, (unsigned) pdlptr);
ringptr->pdl = pdlptr; /* +1; */
ringptr->pdl_paddr = virt_to_bus(pdlptr); /* +1 */
ringptr->pdl_paddr = virt_to_whatever(dev, pdlptr); /* +1 */
ringptr->skb = (void *) NULL;
return ((((MAX_TX_FRAG * 2 + 2) + 3) / 4) * 4);
......@@ -1331,8 +1355,10 @@ static int hp100_build_rx_pdl(hp100_ring_t * ringptr,
(unsigned int) ringptr->skb->data);
#endif
/* Conversion to new PCI API : map skbuf data to PCI bus.
* Doc says it's OK for EISA as well - Jean II */
ringptr->pdl[0] = 0x00020000; /* Write PDH */
ringptr->pdl[3] = ((u_int) virt_to_bus(ringptr->skb->data));
ringptr->pdl[3] = ((u_int) pci_map_single(((struct hp100_private *) (dev->priv))->pci_dev, ringptr->skb->data, MAX_ETHER_SIZE, PCI_DMA_FROMDEVICE));
ringptr->pdl[4] = MAX_ETHER_SIZE; /* Length of Data */
#ifdef HP100_DEBUG_BM
......@@ -1585,7 +1611,6 @@ static int hp100_start_xmit_bm(struct sk_buff *skb, struct net_device *dev)
ringptr->skb = skb;
ringptr->pdl[0] = ((1 << 16) | i); /* PDH: 1 Fragment & length */
ringptr->pdl[1] = (u32) virt_to_bus(skb->data); /* 1st Frag: Adr. of data */
if (lp->chip == HP100_CHIPID_SHASTA) {
/* TODO:Could someone who has the EISA card please check if this works? */
ringptr->pdl[2] = i;
......@@ -1593,6 +1618,9 @@ static int hp100_start_xmit_bm(struct sk_buff *skb, struct net_device *dev)
/* In the PDL, don't use the padded size but the real packet size: */
ringptr->pdl[2] = skb->len; /* 1st Frag: Length of frag */
}
/* Conversion to new PCI API : map skbuf data to PCI bus.
* Doc says it's OK for EISA as well - Jean II */
ringptr->pdl[1] = ((u32) pci_map_single(lp->pci_dev, skb->data, ringptr->pdl[2], PCI_DMA_TODEVICE)); /* 1st Frag: Adr. of data */
/* Hand this PDL to the card. */
hp100_outl(ringptr->pdl_paddr, TX_PDA_L); /* Low Prio. Queue */
......@@ -1641,6 +1669,8 @@ static void hp100_clean_txring(struct net_device *dev)
dev->name, (u_int) lp->txrhead->skb->data,
lp->txrcommit, hp100_inb(TX_PDL), donecount);
#endif
/* Conversion to new PCI API : NOP */
pci_unmap_single(lp->pci_dev, (dma_addr_t) lp->txrhead->pdl[1], lp->txrhead->pdl[2], PCI_DMA_TODEVICE);
dev_kfree_skb_any(lp->txrhead->skb);
lp->txrhead->skb = (void *) NULL;
lp->txrhead = lp->txrhead->next;
......@@ -1950,6 +1980,9 @@ static void hp100_rx_bm(struct net_device *dev)
header = *(ptr->pdl - 1);
pkt_len = (header & HP100_PKT_LEN_MASK);
/* Conversion to new PCI API : NOP */
pci_unmap_single(lp->pci_dev, (dma_addr_t) ptr->pdl[3], MAX_ETHER_SIZE, PCI_DMA_FROMDEVICE);
#ifdef HP100_DEBUG_BM
printk("hp100: %s: rx_bm: header@0x%x=0x%x length=%d, errors=0x%x, dest=0x%x\n",
dev->name, (u_int) (ptr->pdl - 1), (u_int) header,
......@@ -2910,7 +2943,7 @@ static void release_dev(int i)
release_region(d->base_addr, HP100_REGION_SIZE);
if (p->mode == 1) /* busmaster */
kfree(p->page_vaddr);
pci_free_consistent(p->pci_dev, MAX_RINGSIZE + 0x0f, p->page_vaddr_algn, virt_to_whatever(d, p->page_vaddr_algn));
if (p->mem_ptr_virt)
iounmap(p->mem_ptr_virt);
kfree(d->priv);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7