Commit ed473ebd authored by Chen-Yu Tsai's avatar Chen-Yu Tsai Committed by Maxime Ripard

ARM: dts: sun9i: Add Reduced Serial Bus controller device node to A80 dtsi

This patch adds a device node for the Reduced Serial Bus (RSB)
controller and the defacto pinmux setting to the A80 dtsi.

Since there is only one possible pinmux setting for RSB, just
set it in the dtsi.
Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent 969c9687
...@@ -900,6 +900,27 @@ r_ir_pins: r_ir { ...@@ -900,6 +900,27 @@ r_ir_pins: r_ir {
allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
}; };
r_rsb_pins: r_rsb {
allwinner,pins = "PN0", "PN1";
allwinner,function = "s_rsb";
allwinner,drive = <SUN4I_PINCTRL_20_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
r_rsb: i2c@08003400 {
compatible = "allwinner,sun8i-a23-rsb";
reg = <0x08003400 0x400>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apbs_gates 3>;
clock-frequency = <3000000>;
resets = <&apbs_rst 3>;
pinctrl-names = "default";
pinctrl-0 = <&r_rsb_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
}; };
}; };
}; };
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment