[PATCH] e1000: Fix regression: garbled stats and irq allocation during swsusp

e1000: Fix suspend/resume powerup and irq allocation

From: Auke Kok <auke-jan.h.kok@intel.com>

After 7.0.33/2.6.16, e1000 suspend/resume left the user with an enabled
device showing garbled statistics and undetermined irq allocation state,
where `ifconfig eth0 down` would display `trying to free already freed irq`.

Explicitly free and allocate irq as well as powerup the PHY during resume
fixes when needed.
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

drivers/net/e1000/e1000_main.c

@@ -4800,6 +4800,9 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
 	if (adapter->hw.phy_type == e1000_phy_igp_3)
 		e1000_phy_powerdown_workaround(&adapter->hw);
 
+	if (netif_running(netdev))
+		e1000_free_irq(adapter);
+
 	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
 	 * would have already happened in close and is redundant. */
 	e1000_release_hw_control(adapter);
@@ -4830,6 +4833,10 @@ e1000_resume(struct pci_dev *pdev)
 	pci_enable_wake(pdev, PCI_D3hot, 0);
 	pci_enable_wake(pdev, PCI_D3cold, 0);
 
+	if (netif_running(netdev) && (err = e1000_request_irq(adapter)))
+		return err;
+
+	e1000_power_up_phy(adapter);
 	e1000_reset(adapter);
 	E1000_WRITE_REG(&adapter->hw, WUS, ~0);