Commit edecbd06 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

staging: comedi: rtd520: remove the board attach noise

Remove all the kernel noise that is output as the board is
attached. Leave a simple dev_info() after the attach is complete.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 60aeb080
...@@ -1431,8 +1431,6 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it) ...@@ -1431,8 +1431,6 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
struct comedi_subdevice *s; struct comedi_subdevice *s;
int ret; int ret;
dev_info(dev->class_dev, "rtd520 attaching.\n");
devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL); devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
if (!devpriv) if (!devpriv)
return -ENOMEM; return -ENOMEM;
...@@ -1447,11 +1445,8 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it) ...@@ -1447,11 +1445,8 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
dev->board_name = thisboard->name; dev->board_name = thisboard->name;
ret = comedi_pci_enable(pcidev, DRV_NAME); ret = comedi_pci_enable(pcidev, DRV_NAME);
if (ret < 0) { if (ret)
dev_info(dev->class_dev,
"Failed to enable PCI device and request regions.\n");
return ret; return ret;
}
dev->iobase = 1; /* the "detach" needs this */ dev->iobase = 1; /* the "detach" needs this */
devpriv->las0 = ioremap_nocache(pci_resource_start(pcidev, 2), devpriv->las0 = ioremap_nocache(pci_resource_start(pcidev, 2),
...@@ -1465,9 +1460,6 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it) ...@@ -1465,9 +1460,6 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
rtd_pci_latency_quirk(dev, pcidev); rtd_pci_latency_quirk(dev, pcidev);
/* Show board configuration */
dev_info(dev->class_dev, "%s:", dev->board_name);
ret = comedi_alloc_subdevices(dev, 4); ret = comedi_alloc_subdevices(dev, 4);
if (ret) if (ret)
return ret; return ret;
...@@ -1525,28 +1517,21 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it) ...@@ -1525,28 +1517,21 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* check if our interrupt is available and get it */ /* check if our interrupt is available and get it */
ret = request_irq(pcidev->irq, rtd_interrupt, ret = request_irq(pcidev->irq, rtd_interrupt,
IRQF_SHARED, DRV_NAME, dev); IRQF_SHARED, DRV_NAME, dev);
if (ret < 0)
if (ret < 0) {
printk("Could not get interrupt! (%u)\n",
pcidev->irq);
return ret; return ret;
}
dev->irq = pcidev->irq; dev->irq = pcidev->irq;
dev_info(dev->class_dev, "( irq=%u )", dev->irq);
ret = rtd520_probe_fifo_depth(dev); ret = rtd520_probe_fifo_depth(dev);
if (ret < 0) if (ret < 0)
return ret; return ret;
devpriv->fifoLen = ret; devpriv->fifoLen = ret;
printk("( fifoLen=%d )", devpriv->fifoLen);
if (dev->irq) if (dev->irq)
writel(ICS_PIE | ICS_PLIE, devpriv->lcfg + LCFG_ITCSR); writel(ICS_PIE | ICS_PLIE, devpriv->lcfg + LCFG_ITCSR);
printk("\ncomedi%d: rtd520 driver attached.\n", dev->minor); dev_info(dev->class_dev, "%s attached\n", dev->board_name);
return 1; return 0;
} }
static void rtd_detach(struct comedi_device *dev) static void rtd_detach(struct comedi_device *dev)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment