Merge tag 'fixes-for-v3.4-rc3' of...

Merge tag 'fixes-for-v3.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

usb: fixes for v3.4-rc cycle

Here are the fixes I have queued for v3.4-rc cycle so far.

It includes fixes on many of the gadget drivers and a few
of the UDC controller drivers.

For musb we have a fix for a kernel oops when unloading
omap2430.ko glue layer, proper error checking for pm_runtime_*,
fix for the ULPI transfer block, and a bug fix in musb_cleanup_urb
routine.

For s3c-hsotg we have mostly FIFO-related fixes (proper TX FIFO
allocation, TX FIFO corruption fix in DMA mode) but also a couple
of minor fixes (fixing maximum packet size for ep0 and fix for
big transfers with DMA).

For the dwc3 driver we have a memory leak fix, a very important
fix for USB30CV with SetFeature tests and the hability to handle
ep0 requests bigger than wMaxPacketSize.

On top of that there's a bunch of gadget driver minor fixes adding
proper section annotations, and fixing up the sysfs interface for
doing device-initiated connect/disconnect and so on.

All patches have been pending on the mailing list for quite a while
and look good for your for-linus branch.

drivers/usb/dwc3/core.c

@@ -206,11 +206,11 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc)
 
 	for (i = 0; i < dwc->num_event_buffers; i++) {
 		evt = dwc->ev_buffs[i];
-		if (evt) {
+		if (evt)
 			dwc3_free_one_event_buffer(dwc, evt);
-			dwc->ev_buffs[i] = NULL;
-		}
 	}
+
+	kfree(dwc->ev_buffs);
 }
 
 /**

drivers/usb/dwc3/ep0.c

@@ -353,6 +353,9 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
 
 			dwc->test_mode_nr = wIndex >> 8;
 			dwc->test_mode = true;
+			break;
+		default:
+			return -EINVAL;
 		}
 		break;
 
@@ -559,15 +562,20 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
 	length = trb->size & DWC3_TRB_SIZE_MASK;
 
 	if (dwc->ep0_bounced) {
+		unsigned transfer_size = ur->length;
+		unsigned maxp = ep0->endpoint.maxpacket;
+
+		transfer_size += (maxp - (transfer_size % maxp));
 		transferred = min_t(u32, ur->length,
-				ep0->endpoint.maxpacket - length);
+				transfer_size - length);
 		memcpy(ur->buf, dwc->ep0_bounce, transferred);
 		dwc->ep0_bounced = false;
 	} else {
 		transferred = ur->length - length;
-		ur->actual += transferred;
 	}
 
+	ur->actual += transferred;
+
 	if ((epnum & 1) && ur->actual < ur->length) {
 		/* for some reason we did not get everything out */
 

drivers/usb/gadget/f_fs.c

@@ -712,7 +712,7 @@ static long ffs_ep0_ioctl(struct file *file, unsigned code, unsigned long value)
 	if (code == FUNCTIONFS_INTERFACE_REVMAP) {
 		struct ffs_function *func = ffs->func;
 		ret = func ? ffs_func_revmap_intf(func, value) : -ENODEV;
-	} else if (gadget->ops->ioctl) {
+	} else if (gadget && gadget->ops->ioctl) {
 		ret = gadget->ops->ioctl(gadget, code, value);
 	} else {
 		ret = -ENOTTY;
@@ -1382,6 +1382,7 @@ static void functionfs_unbind(struct ffs_data *ffs)
 		ffs->ep0req = NULL;
 		ffs->gadget = NULL;
 		ffs_data_put(ffs);
+		clear_bit(FFS_FL_BOUND, &ffs->flags);
 	}
 }
 

drivers/usb/gadget/f_rndis.c

@@ -500,6 +500,7 @@ rndis_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
 			if (buf) {
 				memcpy(req->buf, buf, n);
 				req->complete = rndis_response_complete;
+				req->context = rndis;
 				rndis_free_response(rndis->config, buf);
 				value = n;
 			}

drivers/usb/gadget/fsl_udc_core.c

@@ -730,7 +730,7 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
 		: (1 << (ep_index(ep)));
 
 	/* check if the pipe is empty */
-	if (!(list_empty(&ep->queue))) {
+	if (!(list_empty(&ep->queue)) && !(ep_index(ep) == 0)) {
 		/* Add td to the end */
 		struct fsl_req *lastreq;
 		lastreq = list_entry(ep->queue.prev, struct fsl_req, queue);
@@ -918,10 +918,6 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 		return -ENOMEM;
 	}
 
-	/* Update ep0 state */
-	if ((ep_index(ep) == 0))
-		udc->ep0_state = DATA_STATE_XMIT;
-
 	/* irq handler advances the queue */
 	if (req != NULL)
 		list_add_tail(&req->queue, &ep->queue);
@@ -1279,7 +1275,8 @@ static int ep0_prime_status(struct fsl_udc *udc, int direction)
 		udc->ep0_dir = USB_DIR_OUT;
 
 	ep = &udc->eps[0];
-	udc->ep0_state = WAIT_FOR_OUT_STATUS;
+	if (udc->ep0_state != DATA_STATE_XMIT)
+		udc->ep0_state = WAIT_FOR_OUT_STATUS;
 
 	req->ep = ep;
 	req->req.length = 0;
@@ -1384,6 +1381,9 @@ static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value,
 
 	list_add_tail(&req->queue, &ep->queue);
 	udc->ep0_state = DATA_STATE_XMIT;
+	if (ep0_prime_status(udc, EP_DIR_OUT))
+		ep0stall(udc);
+
 	return;
 stall:
 	ep0stall(udc);
@@ -1492,6 +1492,14 @@ static void setup_received_irq(struct fsl_udc *udc,
 		spin_lock(&udc->lock);
 		udc->ep0_state = (setup->bRequestType & USB_DIR_IN)
 				?  DATA_STATE_XMIT : DATA_STATE_RECV;
+		/*
+		 * If the data stage is IN, send status prime immediately.
+		 * See 2.0 Spec chapter 8.5.3.3 for detail.
+		 */
+		if (udc->ep0_state == DATA_STATE_XMIT)
+			if (ep0_prime_status(udc, EP_DIR_OUT))
+				ep0stall(udc);
+
 	} else {
 		/* No data phase, IN status from gadget */
 		udc->ep0_dir = USB_DIR_IN;
@@ -1520,9 +1528,8 @@ static void ep0_req_complete(struct fsl_udc *udc, struct fsl_ep *ep0,
 
 	switch (udc->ep0_state) {
 	case DATA_STATE_XMIT:
-		/* receive status phase */
-		if (ep0_prime_status(udc, EP_DIR_OUT))
-			ep0stall(udc);
+		/* already primed at setup_received_irq */
+		udc->ep0_state = WAIT_FOR_OUT_STATUS;
 		break;
 	case DATA_STATE_RECV:
 		/* send status phase */

drivers/usb/gadget/g_ffs.c

@@ -161,7 +161,7 @@ static struct usb_composite_driver gfs_driver = {
 static struct ffs_data *gfs_ffs_data;
 static unsigned long gfs_registered;
 
-static int  gfs_init(void)
+static int __init gfs_init(void)
 {
 	ENTER();
 
@@ -169,7 +169,7 @@ static int  gfs_init(void)
 }
 module_init(gfs_init);
 
-static void  gfs_exit(void)
+static void __exit gfs_exit(void)
 {
 	ENTER();
 

drivers/usb/gadget/s3c-hsotg.c

@@ -340,7 +340,7 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg)
 	/* currently we allocate TX FIFOs for all possible endpoints,
 	 * and assume that they are all the same size. */
 
-	for (ep = 0; ep <= 15; ep++) {
+	for (ep = 1; ep <= 15; ep++) {
 		val = addr;
 		val |= size << S3C_DPTXFSIZn_DPTxFSize_SHIFT;
 		addr += size;
@@ -741,7 +741,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
 	/* write size / packets */
 	writel(epsize, hsotg->regs + epsize_reg);
 
-	if (using_dma(hsotg)) {
+	if (using_dma(hsotg) && !continuing) {
 		unsigned int dma_reg;
 
 		/* write DMA address to control register, buffer already
@@ -1696,10 +1696,12 @@ static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg,
 	reg |= mpsval;
 	writel(reg, regs + S3C_DIEPCTL(ep));
 
-	reg = readl(regs + S3C_DOEPCTL(ep));
-	reg &= ~S3C_DxEPCTL_MPS_MASK;
-	reg |= mpsval;
-	writel(reg, regs + S3C_DOEPCTL(ep));
+	if (ep) {
+		reg = readl(regs + S3C_DOEPCTL(ep));
+		reg &= ~S3C_DxEPCTL_MPS_MASK;
+		reg |= mpsval;
+		writel(reg, regs + S3C_DOEPCTL(ep));
+	}
 
 	return;
 
@@ -1919,7 +1921,8 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
 		    ints & S3C_DIEPMSK_TxFIFOEmpty) {
 			dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n",
 				__func__, idx);
-			s3c_hsotg_trytx(hsotg, hs_ep);
+			if (!using_dma(hsotg))
+				s3c_hsotg_trytx(hsotg, hs_ep);
 		}
 	}
 }

drivers/usb/gadget/udc-core.c

@@ -264,8 +264,8 @@ static void usb_gadget_remove_driver(struct usb_udc *udc)
 	if (udc_is_newstyle(udc)) {
 		udc->driver->disconnect(udc->gadget);
 		udc->driver->unbind(udc->gadget);
-		usb_gadget_udc_stop(udc->gadget, udc->driver);
 		usb_gadget_disconnect(udc->gadget);
+		usb_gadget_udc_stop(udc->gadget, udc->driver);
 	} else {
 		usb_gadget_stop(udc->gadget, udc->driver);
 	}
@@ -411,8 +411,12 @@ static ssize_t usb_udc_softconn_store(struct device *dev,
 	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
 
 	if (sysfs_streq(buf, "connect")) {
+		if (udc_is_newstyle(udc))
+			usb_gadget_udc_start(udc->gadget, udc->driver);
 		usb_gadget_connect(udc->gadget);
 	} else if (sysfs_streq(buf, "disconnect")) {
+		if (udc_is_newstyle(udc))
+			usb_gadget_udc_stop(udc->gadget, udc->driver);
 		usb_gadget_disconnect(udc->gadget);
 	} else {
 		dev_err(dev, "unsupported command '%s'\n", buf);

drivers/usb/gadget/uvc_queue.c

@@ -543,11 +543,11 @@ static int uvc_queue_enable(struct uvc_video_queue *queue, int enable)
 	return ret;
 }
 
+/* called with queue->irqlock held.. */
 static struct uvc_buffer *
 uvc_queue_next_buffer(struct uvc_video_queue *queue, struct uvc_buffer *buf)
 {
 	struct uvc_buffer *nextbuf;
-	unsigned long flags;
 
 	if ((queue->flags & UVC_QUEUE_DROP_INCOMPLETE) &&
 	    buf->buf.length != buf->buf.bytesused) {
@@ -556,14 +556,12 @@ uvc_queue_next_buffer(struct uvc_video_queue *queue, struct uvc_buffer *buf)
 		return buf;
 	}
 
-	spin_lock_irqsave(&queue->irqlock, flags);
 	list_del(&buf->queue);
 	if (!list_empty(&queue->irqqueue))
 		nextbuf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
 					   queue);
 	else
 		nextbuf = NULL;
-	spin_unlock_irqrestore(&queue->irqlock, flags);
 
 	buf->buf.sequence = queue->sequence++;
 	do_gettimeofday(&buf->buf.timestamp);

drivers/usb/musb/musb_core.c

@@ -137,6 +137,9 @@ static int musb_ulpi_read(struct usb_phy *phy, u32 offset)
 	int	i = 0;
 	u8	r;
 	u8	power;
+	int	ret;
+
+	pm_runtime_get_sync(phy->io_dev);
 
 	/* Make sure the transceiver is not in low power mode */
 	power = musb_readb(addr, MUSB_POWER);
@@ -154,15 +157,22 @@ static int musb_ulpi_read(struct usb_phy *phy, u32 offset)
 	while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
 				& MUSB_ULPI_REG_CMPLT)) {
 		i++;
-		if (i == 10000)
-			return -ETIMEDOUT;
+		if (i == 10000) {
+			ret = -ETIMEDOUT;
+			goto out;
+		}
 
 	}
 	r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
 	r &= ~MUSB_ULPI_REG_CMPLT;
 	musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
 
-	return musb_readb(addr, MUSB_ULPI_REG_DATA);
+	ret = musb_readb(addr, MUSB_ULPI_REG_DATA);
+
+out:
+	pm_runtime_put(phy->io_dev);
+
+	return ret;
 }
 
 static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
@@ -171,6 +181,9 @@ static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
 	int	i = 0;
 	u8	r = 0;
 	u8	power;
+	int	ret = 0;
+
+	pm_runtime_get_sync(phy->io_dev);
 
 	/* Make sure the transceiver is not in low power mode */
 	power = musb_readb(addr, MUSB_POWER);
@@ -184,15 +197,20 @@ static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
 	while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
 				& MUSB_ULPI_REG_CMPLT)) {
 		i++;
-		if (i == 10000)
-			return -ETIMEDOUT;
+		if (i == 10000) {
+			ret = -ETIMEDOUT;
+			goto out;
+		}
 	}
 
 	r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
 	r &= ~MUSB_ULPI_REG_CMPLT;
 	musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
 
-	return 0;
+out:
+	pm_runtime_put(phy->io_dev);
+
+	return ret;
 }
 #else
 #define musb_ulpi_read		NULL
@@ -1904,14 +1922,17 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 
 	if (!musb->isr) {
 		status = -ENODEV;
-		goto fail3;
+		goto fail2;
 	}
 
 	if (!musb->xceiv->io_ops) {
+		musb->xceiv->io_dev = musb->controller;
 		musb->xceiv->io_priv = musb->mregs;
 		musb->xceiv->io_ops = &musb_ulpi_access;
 	}
 
+	pm_runtime_get_sync(musb->controller);
+
 #ifndef CONFIG_MUSB_PIO_ONLY
 	if (use_dma && dev->dma_mask) {
 		struct dma_controller	*c;
@@ -2023,6 +2044,8 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 		goto fail5;
 #endif
 
+	pm_runtime_put(musb->controller);
+
 	dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n",
 			({char *s;
 			 switch (musb->board_mode) {
@@ -2047,6 +2070,9 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 		musb_gadget_cleanup(musb);
 
 fail3:
+	pm_runtime_put_sync(musb->controller);
+
+fail2:
 	if (musb->irq_wake)
 		device_init_wakeup(dev, 0);
 	musb_platform_exit(musb);

drivers/usb/musb/musb_host.c

@@ -2098,7 +2098,7 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh)
 	}
 
 	/* turn off DMA requests, discard state, stop polling ... */
-	if (is_in) {
+	if (ep->epnum && is_in) {
 		/* giveback saves bulk toggle */
 		csr = musb_h_flush_rxfifo(ep, 0);
 

drivers/usb/musb/omap2430.c

@@ -282,7 +282,8 @@ static void musb_otg_notifier_work(struct work_struct *data_notifier_work)
 
 static int omap2430_musb_init(struct musb *musb)
 {
-	u32 l, status = 0;
+	u32 l;
+	int status = 0;
 	struct device *dev = musb->controller;
 	struct musb_hdrc_platform_data *plat = dev->platform_data;
 	struct omap_musb_board_data *data = plat->board_data;
@@ -301,7 +302,7 @@ static int omap2430_musb_init(struct musb *musb)
 
 	status = pm_runtime_get_sync(dev);
 	if (status < 0) {
-		dev_err(dev, "pm_runtime_get_sync FAILED");
+		dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status);
 		goto err1;
 	}
 
@@ -333,6 +334,7 @@ static int omap2430_musb_init(struct musb *musb)
 
 	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
 
+	pm_runtime_put_noidle(musb->controller);
 	return 0;
 
 err1:
@@ -452,14 +454,14 @@ static int __devinit omap2430_probe(struct platform_device *pdev)
 		goto err2;
 	}
 
+	pm_runtime_enable(&pdev->dev);
+
 	ret = platform_device_add(musb);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register musb device\n");
 		goto err2;
 	}
 
-	pm_runtime_enable(&pdev->dev);
-
 	return 0;
 
 err2:
@@ -478,7 +480,6 @@ static int __devexit omap2430_remove(struct platform_device *pdev)
 
 	platform_device_del(glue->musb);
 	platform_device_put(glue->musb);
-	pm_runtime_put(&pdev->dev);
 	kfree(glue);
 
 	return 0;
@@ -491,11 +492,13 @@ static int omap2430_runtime_suspend(struct device *dev)
 	struct omap2430_glue		*glue = dev_get_drvdata(dev);
 	struct musb			*musb = glue_to_musb(glue);
 
-	musb->context.otg_interfsel = musb_readl(musb->mregs,
-						OTG_INTERFSEL);
+	if (musb) {
+		musb->context.otg_interfsel = musb_readl(musb->mregs,
+				OTG_INTERFSEL);
 
-	omap2430_low_level_exit(musb);
-	usb_phy_set_suspend(musb->xceiv, 1);
+		omap2430_low_level_exit(musb);
+		usb_phy_set_suspend(musb->xceiv, 1);
+	}
 
 	return 0;
 }
@@ -505,11 +508,13 @@ static int omap2430_runtime_resume(struct device *dev)
 	struct omap2430_glue		*glue = dev_get_drvdata(dev);
 	struct musb			*musb = glue_to_musb(glue);
 
-	omap2430_low_level_init(musb);
-	musb_writel(musb->mregs, OTG_INTERFSEL,
-					musb->context.otg_interfsel);
+	if (musb) {
+		omap2430_low_level_init(musb);
+		musb_writel(musb->mregs, OTG_INTERFSEL,
+				musb->context.otg_interfsel);
 
-	usb_phy_set_suspend(musb->xceiv, 0);
+		usb_phy_set_suspend(musb->xceiv, 0);
+	}
 
 	return 0;
 }

include/linux/usb/otg.h

@@ -94,6 +94,7 @@ struct usb_phy {
 
 	struct usb_otg		*otg;
 
+	struct device		*io_dev;
 	struct usb_phy_io_ops	*io_ops;
 	void __iomem		*io_priv;