Commit ee353e45 authored by Marek Vasut's avatar Marek Vasut Committed by David S. Miller

net: dsa: microchip: Replace bit RMW with regmap

Regmap provides read-modify-write function to update bitfields in
registers. Replace ad-hoc read-modify-write with regmap_update_bits()
where applicable.
Signed-off-by: default avatarMarek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Woojung Huh <Woojung.Huh@microchip.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 3371efbc
......@@ -197,16 +197,14 @@ static int ksz9477_wait_alu_sta_ready(struct ksz_device *dev)
static int ksz9477_reset_switch(struct ksz_device *dev)
{
u8 data8;
u16 data16;
u32 data32;
/* reset switch */
ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true);
/* turn off SPI DO Edge select */
ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
data8 &= ~SPI_AUTO_EDGE_DETECTION;
ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
regmap_update_bits(dev->regmap[0], REG_SW_GLOBAL_SERIAL_CTRL_0,
SPI_AUTO_EDGE_DETECTION, 0);
/* default configuration */
ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
......@@ -220,10 +218,10 @@ static int ksz9477_reset_switch(struct ksz_device *dev)
ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
/* set broadcast storm protection 10% rate */
ksz_read16(dev, REG_SW_MAC_CTRL_2, &data16);
data16 &= ~BROADCAST_STORM_RATE;
data16 |= (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100;
ksz_write16(dev, REG_SW_MAC_CTRL_2, data16);
regmap_update_bits(dev->regmap[1], REG_SW_MAC_CTRL_2,
BROADCAST_STORM_RATE,
(BROADCAST_STORM_VALUE *
BROADCAST_STORM_PROT_RATE) / 100);
if (dev->synclko_125)
ksz_write8(dev, REG_SW_GLOBAL_OUTPUT_CTRL__1,
......@@ -485,10 +483,10 @@ static void ksz9477_flush_dyn_mac_table(struct ksz_device *dev, int port)
{
u8 data;
ksz_read8(dev, REG_SW_LUE_CTRL_2, &data);
data &= ~(SW_FLUSH_OPTION_M << SW_FLUSH_OPTION_S);
data |= (SW_FLUSH_OPTION_DYN_MAC << SW_FLUSH_OPTION_S);
ksz_write8(dev, REG_SW_LUE_CTRL_2, data);
regmap_update_bits(dev->regmap[0], REG_SW_LUE_CTRL_2,
SW_FLUSH_OPTION_M << SW_FLUSH_OPTION_S,
SW_FLUSH_OPTION_DYN_MAC << SW_FLUSH_OPTION_S);
if (port < dev->mib_port_cnt) {
/* flush individual port */
ksz_pread8(dev, port, P_STP_CTRL, &data);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment