include/asm-mips/: Spelling fixes

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

include/asm-mips/mach-excite/excite_fpga.h

@@ -3,7 +3,7 @@
 
 
 /**
- * Adress alignment of the individual FPGA bytes.
+ * Address alignment of the individual FPGA bytes.
  * The address arrangement of the individual bytes of the FPGA is two
  * byte aligned at the embedded MK2 platform.
  */

include/asm-mips/mach-wrppmc/mach-gt64120.h

@@ -45,7 +45,7 @@
 #define GT_PCI_IO_SIZE	0x02000000UL
 
 /*
- * PCI interrupts will come in on either the INTA or INTD interrups lines,
+ * PCI interrupts will come in on either the INTA or INTD interrupt lines,
  * which are mapped to the #2 and #5 interrupt pins of the MIPS.  On our
  * boards, they all either come in on IntD or they all come in on IntA, they
  * aren't mixed. There can be numerous PCI interrupts, so we keep a list of the

include/asm-mips/sgi/ip22.h

@@ -15,7 +15,7 @@
 /*
  * These are the virtual IRQ numbers, we divide all IRQ's into
  * 'spaces', the 'space' determines where and how to enable/disable
- * that particular IRQ on an SGI machine. HPC DMA and MC DMA interrups
+ * that particular IRQ on an SGI machine. HPC DMA and MC DMA interrupts
  * are not supported this way. Driver is supposed to allocate HPC/MC
  * interrupt as shareable and then look to proper status bit (see
  * HAL2 driver). This will prevent many complications, trust me ;-)

include/asm-mips/sn/sn0/hubio.h

@@ -338,7 +338,7 @@ typedef union io_perf_cnt {
 #define IIO_IFDR	0x400398	/* IOQ FIFO Depth */
 #define IIO_IIAP	0x4003a0	/* IIQ Arbitration Parameters */
 #define IIO_IMMR	IIO_IIAP
-#define IIO_ICMR	0x4003a8	/* CRB Managment Register */
+#define IIO_ICMR	0x4003a8	/* CRB Management Register */
 #define IIO_ICCR	0x4003b0	/* CRB Control Register */
 #define IIO_ICTO	0x4003b8	/* CRB Time Out Register */
 #define IIO_ICTP	0x4003c0	/* CRB Time Out Prescalar */