arm64: dts: marvell: armada-cp110: change the PPv2 IRQ names

This patch changes the PPv2 IRQ names in the CP110 device tree to match
a corresponding change in the Marvell PPv2 driver. The reason this was
updated is the IRQ where names after Tx/Rx interrupts, but this is not
true and can be configured. A following patch will add more of them and
the names wouldn't make sense.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

arch/arm64/boot/dts/marvell/armada-cp110.dtsi

@@ -71,8 +71,8 @@ CP110_LABEL(eth0): eth0 {
 					<ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
 					<ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
 					<ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
-					"tx-cpu3", "rx-shared", "link";
+				interrupt-names = "hif0", "hif1", "hif2",
+					"hif3", "hif4", "link";
 				port-id = <0>;
 				gop-port-id = <0>;
 				status = "disabled";
@@ -85,8 +85,8 @@ CP110_LABEL(eth1): eth1 {
 					<ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
 					<ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
 					<ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
-					"tx-cpu3", "rx-shared", "link";
+				interrupt-names = "hif0", "hif1", "hif2",
+					"hif3", "hif4", "link";
 				port-id = <1>;
 				gop-port-id = <2>;
 				status = "disabled";
@@ -99,8 +99,8 @@ CP110_LABEL(eth2): eth2 {
 					<ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
 					<ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
 					<ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
-					"tx-cpu3", "rx-shared", "link";
+				interrupt-names = "hif0", "hif1", "hif2",
+					"hif3", "hif4", "link";
 				port-id = <2>;
 				gop-port-id = <3>;
 				status = "disabled";