Commit ef0459c7 authored by Thomas Petazzoni's avatar Thomas Petazzoni Committed by Greg Kroah-Hartman

staging: fbtft: add fb_upd161704 driver

This commit adds the fb_upd161704 driver from the fbtft project at
https://github.com/notro/fbtft.
Signed-off-by: default avatarThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: default avatarNoralf Tronnes <notro@tronnes.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 5741ecd6
...@@ -145,3 +145,9 @@ config FB_TFT_UC1701 ...@@ -145,3 +145,9 @@ config FB_TFT_UC1701
depends on FB_TFT depends on FB_TFT
help help
Generic Framebuffer support for UC1701 Generic Framebuffer support for UC1701
config FB_TFT_UPD161704
tristate "FB driver for the uPD161704 LCD Controller"
depends on FB_TFT
help
Generic Framebuffer support for uPD161704
...@@ -26,3 +26,4 @@ obj-$(CONFIG_FB_TFT_ST7735R) += fb_st7735r.o ...@@ -26,3 +26,4 @@ obj-$(CONFIG_FB_TFT_ST7735R) += fb_st7735r.o
obj-$(CONFIG_FB_TFT_TINYLCD) += fb_tinylcd.o obj-$(CONFIG_FB_TFT_TINYLCD) += fb_tinylcd.o
obj-$(CONFIG_FB_TFT_TLS8204) += fb_tls8204.o obj-$(CONFIG_FB_TFT_TLS8204) += fb_tls8204.o
obj-$(CONFIG_FB_TFT_UC1701) += fb_uc1701.o obj-$(CONFIG_FB_TFT_UC1701) += fb_uc1701.o
obj-$(CONFIG_FB_TFT_UPD161704) += fb_upd161704.o
/*
* FB driver for the uPD161704 LCD Controller
*
* Copyright (C) 2014 Seong-Woo Kim
*
* Based on fb_ili9325.c by Noralf Tronnes
* Based on ili9325.c by Jeroen Domburg
* Init code from UTFT library by Henning Karlsen
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include "fbtft.h"
#define DRVNAME "fb_upd161704"
#define WIDTH 240
#define HEIGHT 320
#define BPP 16
static int init_display(struct fbtft_par *par)
{
fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__);
par->fbtftops.reset(par);
if (par->gpio.cs != -1)
gpio_set_value(par->gpio.cs, 0); /* Activate chip */
/* Initialization sequence from Lib_UTFT */
/* register reset */
write_reg(par, 0x0003,0x0001); /* Soft reset */
/* oscillator start */
write_reg(par, 0x003A,0x0001); /*Oscillator 0: stop, 1: operation */
udelay(100);
/* y-setting */
write_reg(par, 0x0024,0x007B); /* amplitude setting */
udelay(10);
write_reg(par, 0x0025,0x003B); /* amplitude setting */
write_reg(par, 0x0026,0x0034); /* amplitude setting */
udelay(10);
write_reg(par, 0x0027,0x0004); /* amplitude setting */
write_reg(par, 0x0052,0x0025); /* circuit setting 1 */
udelay(10);
write_reg(par, 0x0053,0x0033); /* circuit setting 2 */
write_reg(par, 0x0061,0x001C); /* adjustment V10 positive polarity */
udelay(10);
write_reg(par, 0x0062,0x002C); /* adjustment V9 negative polarity */
write_reg(par, 0x0063,0x0022); /* adjustment V34 positive polarity */
udelay(10);
write_reg(par, 0x0064,0x0027); /* adjustment V31 negative polarity */
udelay(10);
write_reg(par, 0x0065,0x0014); /* adjustment V61 negative polarity */
udelay(10);
write_reg(par, 0x0066,0x0010); /* adjustment V61 negative polarity */
/* Basical clock for 1 line (BASECOUNT[7:0]) number specified */
write_reg(par, 0x002E,0x002D);
/* Power supply setting */
write_reg(par, 0x0019,0x0000); /* DC/DC output setting */
udelay(200);
write_reg(par, 0x001A,0x1000); /* DC/DC frequency setting */
write_reg(par, 0x001B,0x0023); /* DC/DC rising setting */
write_reg(par, 0x001C,0x0C01); /* Regulator voltage setting */
write_reg(par, 0x001D,0x0000); /* Regulator current setting */
write_reg(par, 0x001E,0x0009); /* VCOM output setting */
write_reg(par, 0x001F,0x0035); /* VCOM amplitude setting */
write_reg(par, 0x0020,0x0015); /* VCOMM cencter setting */
write_reg(par, 0x0018,0x1E7B); /* DC/DC operation setting */
/* windows setting */
write_reg(par, 0x0008,0x0000); /* Minimum X address */
write_reg(par, 0x0009,0x00EF); /* Maximum X address */
write_reg(par, 0x000a,0x0000); /* Minimum Y address */
write_reg(par, 0x000b,0x013F); /* Maximum Y address */
/* LCD display area setting */
write_reg(par, 0x0029,0x0000); /* [LCDSIZE] X MIN. size set */
write_reg(par, 0x002A,0x0000); /* [LCDSIZE] Y MIN. size set */
write_reg(par, 0x002B,0x00EF); /* [LCDSIZE] X MAX. size set */
write_reg(par, 0x002C,0x013F); /* [LCDSIZE] Y MAX. size set */
/* Gate scan setting */
write_reg(par, 0x0032,0x0002);
/* n line inversion line number */
write_reg(par, 0x0033,0x0000);
/* Line inversion/frame inversion/interlace setting */
write_reg(par, 0x0037,0x0000);
/* Gate scan operation setting register */
write_reg(par, 0x003B,0x0001);
/* Color mode */
/*GS = 0: 260-k color (64 gray scale), GS = 1: 8 color (2 gray scale) */
write_reg(par, 0x0004,0x0000);
/* RAM control register */
write_reg(par, 0x0005,0x0000); /*Window access 00:Normal, 10:Window */
/* Display setting register 2 */
write_reg(par, 0x0001,0x0000);
/* display setting */
write_reg(par, 0x0000,0x0000); /* display on */
return 0;
}
static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
{
fbtft_par_dbg(DEBUG_SET_ADDR_WIN, par,
"%s(xs=%d, ys=%d, xe=%d, ye=%d)\n", __func__, xs, ys, xe, ye);
switch (par->info->var.rotate) {
/* R20h = Horizontal GRAM Start Address */
/* R21h = Vertical GRAM Start Address */
case 0:
write_reg(par, 0x0006, xs);
write_reg(par, 0x0007, ys);
break;
case 180:
write_reg(par, 0x0006, WIDTH - 1 - xs);
write_reg(par, 0x0007, HEIGHT - 1 - ys);
break;
case 270:
write_reg(par, 0x0006, WIDTH - 1 - ys);
write_reg(par, 0x0007, xs);
break;
case 90:
write_reg(par, 0x0006, ys);
write_reg(par, 0x0007, HEIGHT - 1 - xs);
break;
}
write_reg(par, 0x0e); /* Write Data to GRAM */
}
static int set_var(struct fbtft_par *par)
{
fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__);
switch (par->info->var.rotate) {
/* AM: GRAM update direction */
case 0:
write_reg(par, 0x01, 0x0000);
write_reg(par, 0x05, 0x0000);
break;
case 180:
write_reg(par, 0x01, 0x00C0);
write_reg(par, 0x05, 0x0000);
break;
case 270:
write_reg(par, 0x01, 0x0080);
write_reg(par, 0x05, 0x0001);
break;
case 90:
write_reg(par, 0x01, 0x0040);
write_reg(par, 0x05, 0x0001);
break;
}
return 0;
}
static struct fbtft_display display = {
.regwidth = 16,
.width = WIDTH,
.height = HEIGHT,
.fbtftops = {
.init_display = init_display,
.set_addr_win = set_addr_win,
.set_var = set_var,
},
};
FBTFT_REGISTER_DRIVER(DRVNAME, "nec,upd161704", &display);
MODULE_ALIAS("spi:" DRVNAME);
MODULE_ALIAS("platform:" DRVNAME);
MODULE_ALIAS("spi:upd161704");
MODULE_ALIAS("platform:upd161704");
MODULE_DESCRIPTION("FB driver for the uPD161704 LCD Controller");
MODULE_AUTHOR("Seong-Woo Kim");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment