Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (88 commits)
  powerpc: Fix lwsync feature fixup vs. modules on 64-bit
  powerpc: Convert pmc_owner_lock to raw_spinlock
  powerpc: Convert die.lock to raw_spinlock
  powerpc: Convert tlbivax_lock to raw_spinlock
  powerpc: Convert mpic locks to raw_spinlock
  powerpc: Convert pmac_pic_lock to raw_spinlock
  powerpc: Convert big_irq_lock to raw_spinlock
  powerpc: Convert feature_lock to raw_spinlock
  powerpc: Convert i8259_lock to raw_spinlock
  powerpc: Convert beat_htab_lock to raw_spinlock
  powerpc: Convert confirm_error_lock to raw_spinlock
  powerpc: Convert ipic_lock to raw_spinlock
  powerpc: Convert native_tlbie_lock to raw_spinlock
  powerpc: Convert beatic_irq_mask_lock to raw_spinlock
  powerpc: Convert nv_lock to raw_spinlock
  powerpc: Convert context_lock to raw_spinlock
  powerpc/85xx: Add NOR, LEDs and PIB support for MPC8568E-MDS boards
  powerpc/86xx: Enable VME driver on the GE SBC610
  powerpc/86xx: Enable VME driver on the GE PPC9A
  powerpc/86xx: Add MSI section to GE PPC9A DTS
  ...

Documentation/powerpc/dts-bindings/fsl/mpc5121-psc.txt

+MPC5121 PSC Device Tree Bindings
+
+PSC in UART mode
+----------------
+
+For PSC in UART mode the needed PSC serial devices
+are specified by fsl,mpc5121-psc-uart nodes in the
+fsl,mpc5121-immr SoC node. Additionally the PSC FIFO
+Controller node fsl,mpc5121-psc-fifo is requered there:
+
+fsl,mpc5121-psc-uart nodes
+--------------------------
+
+Required properties :
+ - compatible : Should contain "fsl,mpc5121-psc-uart" and "fsl,mpc5121-psc"
+ - cell-index : Index of the PSC in hardware
+ - reg : Offset and length of the register set for the PSC device
+ - interrupts : <a b> where a is the interrupt number of the
+   PSC FIFO Controller and b is a field that represents an
+   encoding of the sense and level information for the interrupt.
+ - interrupt-parent : the phandle for the interrupt controller that
+   services interrupts for this device.
+
+Recommended properties :
+ - fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4)
+ - fsl,tx-fifo-size : the size of the TX fifo slice (a multiple of 4)
+
+
+fsl,mpc5121-psc-fifo node
+-------------------------
+
+Required properties :
+ - compatible : Should be "fsl,mpc5121-psc-fifo"
+ - reg : Offset and length of the register set for the PSC
+         FIFO Controller
+ - interrupts : <a b> where a is the interrupt number of the
+   PSC FIFO Controller and b is a field that represents an
+   encoding of the sense and level information for the interrupt.
+ - interrupt-parent : the phandle for the interrupt controller that
+   services interrupts for this device.
+
+
+Example for a board using PSC0 and PSC1 devices in serial mode:
+
+serial@11000 {
+	compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+	cell-index = <0>;
+	reg = <0x11000 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+	fsl,rx-fifo-size = <16>;
+	fsl,tx-fifo-size = <16>;
+};
+
+serial@11100 {
+	compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+	cell-index = <1>;
+	reg = <0x11100 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+	fsl,rx-fifo-size = <16>;
+	fsl,tx-fifo-size = <16>;
+};
+
+pscfifo@11f00 {
+	compatible = "fsl,mpc5121-psc-fifo";
+	reg = <0x11f00 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+};

Documentation/powerpc/dts-bindings/fsl/spi.txt

@@ -13,6 +13,11 @@ Required properties:
 - interrupt-parent : the phandle for the interrupt controller that
   services interrupts for this device.
 
+Optional properties:
+- gpios : specifies the gpio pins to be used for chipselects.
+  The gpios will be referred to as reg = <index> in the SPI child nodes.
+  If unspecified, a single SPI device without a chip select can be used.
+
 Example:
 	spi@4c0 {
 		cell-index = <0>;
@@ -21,4 +26,6 @@ Example:
 		interrupts = <82 0>;
 		interrupt-parent = <700>;
 		mode = "cpu";
+		gpios = <&gpio 18 1	// device reg=<0>
+			 &gpio 19 1>;	// device reg=<1>
 	};

Documentation/powerpc/ptrace.txt

+GDB intends to support the following hardware debug features of BookE
+processors:
+
+4 hardware breakpoints (IAC)
+2 hardware watchpoints (read, write and read-write) (DAC)
+2 value conditions for the hardware watchpoints (DVC)
+
+For that, we need to extend ptrace so that GDB can query and set these
+resources. Since we're extending, we're trying to create an interface
+that's extendable and that covers both BookE and server processors, so
+that GDB doesn't need to special-case each of them. We added the
+following 3 new ptrace requests.
+
+1. PTRACE_PPC_GETHWDEBUGINFO
+
+Query for GDB to discover the hardware debug features. The main info to
+be returned here is the minimum alignment for the hardware watchpoints.
+BookE processors don't have restrictions here, but server processors have
+an 8-byte alignment restriction for hardware watchpoints. We'd like to avoid
+adding special cases to GDB based on what it sees in AUXV.
+
+Since we're at it, we added other useful info that the kernel can return to
+GDB: this query will return the number of hardware breakpoints, hardware
+watchpoints and whether it supports a range of addresses and a condition.
+The query will fill the following structure provided by the requesting process:
+
+struct ppc_debug_info {
+       unit32_t version;
+       unit32_t num_instruction_bps;
+       unit32_t num_data_bps;
+       unit32_t num_condition_regs;
+       unit32_t data_bp_alignment;
+       unit32_t sizeof_condition; /* size of the DVC register */
+       uint64_t features; /* bitmask of the individual flags */
+};
+
+features will have bits indicating whether there is support for:
+
+#define PPC_DEBUG_FEATURE_INSN_BP_RANGE		0x1
+#define PPC_DEBUG_FEATURE_INSN_BP_MASK		0x2
+#define PPC_DEBUG_FEATURE_DATA_BP_RANGE		0x4
+#define PPC_DEBUG_FEATURE_DATA_BP_MASK		0x8
+
+2. PTRACE_SETHWDEBUG
+
+Sets a hardware breakpoint or watchpoint, according to the provided structure:
+
+struct ppc_hw_breakpoint {
+        uint32_t version;
+#define PPC_BREAKPOINT_TRIGGER_EXECUTE  0x1
+#define PPC_BREAKPOINT_TRIGGER_READ     0x2
+#define PPC_BREAKPOINT_TRIGGER_WRITE    0x4
+        uint32_t trigger_type;       /* only some combinations allowed */
+#define PPC_BREAKPOINT_MODE_EXACT               0x0
+#define PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE     0x1
+#define PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE     0x2
+#define PPC_BREAKPOINT_MODE_MASK                0x3
+        uint32_t addr_mode;          /* address match mode */
+
+#define PPC_BREAKPOINT_CONDITION_MODE   0x3
+#define PPC_BREAKPOINT_CONDITION_NONE   0x0
+#define PPC_BREAKPOINT_CONDITION_AND    0x1
+#define PPC_BREAKPOINT_CONDITION_EXACT  0x1	/* different name for the same thing as above */
+#define PPC_BREAKPOINT_CONDITION_OR     0x2
+#define PPC_BREAKPOINT_CONDITION_AND_OR 0x3
+#define PPC_BREAKPOINT_CONDITION_BE_ALL 0x00ff0000	/* byte enable bits */
+#define PPC_BREAKPOINT_CONDITION_BE(n)  (1<<((n)+16))
+        uint32_t condition_mode;     /* break/watchpoint condition flags */
+
+        uint64_t addr;
+        uint64_t addr2;
+        uint64_t condition_value;
+};
+
+A request specifies one event, not necessarily just one register to be set.
+For instance, if the request is for a watchpoint with a condition, both the
+DAC and DVC registers will be set in the same request.
+
+With this GDB can ask for all kinds of hardware breakpoints and watchpoints
+that the BookE supports. COMEFROM breakpoints available in server processors
+are not contemplated, but that is out of the scope of this work.
+
+ptrace will return an integer (handle) uniquely identifying the breakpoint or
+watchpoint just created. This integer will be used in the PTRACE_DELHWDEBUG
+request to ask for its removal. Return -ENOSPC if the requested breakpoint
+can't be allocated on the registers.
+
+Some examples of using the structure to:
+
+- set a breakpoint in the first breakpoint register
+
+  p.version         = PPC_DEBUG_CURRENT_VERSION;
+  p.trigger_type    = PPC_BREAKPOINT_TRIGGER_EXECUTE;
+  p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
+  p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
+  p.addr            = (uint64_t) address;
+  p.addr2           = 0;
+  p.condition_value = 0;
+
+- set a watchpoint which triggers on reads in the second watchpoint register
+
+  p.version         = PPC_DEBUG_CURRENT_VERSION;
+  p.trigger_type    = PPC_BREAKPOINT_TRIGGER_READ;
+  p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
+  p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
+  p.addr            = (uint64_t) address;
+  p.addr2           = 0;
+  p.condition_value = 0;
+
+- set a watchpoint which triggers only with a specific value
+
+  p.version         = PPC_DEBUG_CURRENT_VERSION;
+  p.trigger_type    = PPC_BREAKPOINT_TRIGGER_READ;
+  p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
+  p.condition_mode  = PPC_BREAKPOINT_CONDITION_AND | PPC_BREAKPOINT_CONDITION_BE_ALL;
+  p.addr            = (uint64_t) address;
+  p.addr2           = 0;
+  p.condition_value = (uint64_t) condition;
+
+- set a ranged hardware breakpoint
+
+  p.version         = PPC_DEBUG_CURRENT_VERSION;
+  p.trigger_type    = PPC_BREAKPOINT_TRIGGER_EXECUTE;
+  p.addr_mode       = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
+  p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
+  p.addr            = (uint64_t) begin_range;
+  p.addr2           = (uint64_t) end_range;
+  p.condition_value = 0;
+
+3. PTRACE_DELHWDEBUG
+
+Takes an integer which identifies an existing breakpoint or watchpoint
+(i.e., the value returned from PTRACE_SETHWDEBUG), and deletes the
+corresponding breakpoint or watchpoint..

arch/powerpc/Kconfig

@@ -58,7 +58,7 @@ config IRQ_PER_CPU
 
 config NR_IRQS
 	int "Number of virtual interrupt numbers"
-	range 32 512
+	range 32 32768
 	default "512"
 	help
 	  This defines the number of virtual interrupt numbers the kernel
@@ -241,6 +241,33 @@ config PPC_OF_PLATFORM_PCI
 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
 	def_bool y
 
+config PPC_ADV_DEBUG_REGS
+	bool
+	depends on 40x || BOOKE
+	default y
+
+config PPC_ADV_DEBUG_IACS
+	int
+	depends on PPC_ADV_DEBUG_REGS
+	default 4 if 44x
+	default 2
+
+config PPC_ADV_DEBUG_DACS
+	int
+	depends on PPC_ADV_DEBUG_REGS
+	default 2
+
+config PPC_ADV_DEBUG_DVCS
+	int
+	depends on PPC_ADV_DEBUG_REGS
+	default 2 if 44x
+	default 0
+
+config PPC_ADV_DEBUG_DAC_RANGE
+	bool
+	depends on PPC_ADV_DEBUG_REGS && 44x
+	default y
+
 source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"

arch/powerpc/boot/dts/arches.dts

@@ -60,6 +60,7 @@ cpu@0 {
 			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
+			next-level-cache = <&L2C0>;
 		};
 	};
 
@@ -146,6 +147,13 @@ SDRAM0: sdram {
 			dcr-reg = <0x010 0x002>;
 		};
 
+		CRYPTO: crypto@180000 {
+			compatible = "amcc,ppc460gt-crypto", "amcc,ppc4xx-crypto";
+			reg = <4 0x00180000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x1d 0x4>;
+		};
+
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
 			dcr-reg = <0x180 0x062>;
@@ -274,6 +282,7 @@ EMAC0: ethernet@ef600e00 {
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
 				phy-mode = "sgmii";
 				phy-map = <0xffffffff>;
 				gpcs-address = <0x0000000a>;
@@ -302,6 +311,7 @@ EMAC1: ethernet@ef600f00 {
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
 				phy-mode = "sgmii";
 				phy-map = <0x00000000>;
 				gpcs-address = <0x0000000b>;
@@ -331,6 +341,8 @@ EMAC2: ethernet@ef601100 {
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>; /* emac2&3 only */
 				phy-mode = "sgmii";
 				phy-map = <0x00000001>;
 				gpcs-address = <0x0000000C>;

arch/powerpc/boot/dts/gef_ppc9a.dts

@@ -341,6 +341,22 @@ mpic: pic@40000 {
 			device_type = "open-pic";
 		};
 
+		msi@41600 {
+			compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
 		global-utilities@e0000 {
 			compatible = "fsl,mpc8641-guts";
 			reg = <0xe0000 0x1000>;

arch/powerpc/boot/dts/gef_sbc310.dts

@@ -32,6 +32,7 @@ aliases {
 		serial0 = &serial0;
 		serial1 = &serial1;
 		pci0 = &pci0;
+		pci1 = &pci1;
 	};
 
 	cpus {
@@ -338,6 +339,22 @@ mpic: pic@40000 {
 			device_type = "open-pic";
 		};
 
+		msi@41600 {
+			compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
 		global-utilities@e0000 {
 			compatible = "fsl,mpc8641-guts";
 			reg = <0xe0000 0x1000>;
@@ -358,7 +375,7 @@ pci0: pcie@fef08000 {
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <0x18 0x2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
 		interrupt-map = <
 			0x0000 0x0 0x0 0x1 &mpic 0x0 0x2
 			0x0000 0x0 0x0 0x2 &mpic 0x1 0x2

arch/powerpc/boot/dts/gef_sbc610.dts

@@ -75,14 +75,48 @@ localbus@fef05000 {
 		interrupts = <19 2>;
 		interrupt-parent = <&mpic>;
 
-		ranges = <0 0 0xff000000 0x01000000     // 16MB Boot flash
-			  1 0 0xe8000000 0x08000000     // Paged Flash 0
-			  2 0 0xe0000000 0x08000000     // Paged Flash 1
-			  3 0 0xfc100000 0x00020000     // NVRAM
-			  4 0 0xfc000000 0x00008000     // FPGA
-			  5 0 0xfc008000 0x00008000     // AFIX FPGA
-			  6 0 0xfd000000 0x00800000     // IO FPGA (8-bit)
-			  7 0 0xfd800000 0x00800000>;   // IO FPGA (32-bit)
+		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
+			  1 0 0xe8000000 0x08000000	// Paged Flash 0
+			  2 0 0xe0000000 0x08000000	// Paged Flash 1
+			  3 0 0xfc100000 0x00020000	// NVRAM
+			  4 0 0xfc000000 0x00008000	// FPGA
+			  5 0 0xfc008000 0x00008000	// AFIX FPGA
+			  6 0 0xfd000000 0x00800000	// IO FPGA (8-bit)
+			  7 0 0xfd800000 0x00800000>;	// IO FPGA (32-bit)
+
+		/* flash@0,0 is a mirror of part of the memory in flash@1,0
+		flash@0,0 {
+			compatible = "gef,sbc610-firmware-mirror", "cfi-flash";
+			reg = <0x0 0x0 0x1000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x1000000>;
+				read-only;
+			};
+		};
+		*/
+
+		flash@1,0 {
+			compatible = "gef,sbc610-paged-flash", "cfi-flash";
+			reg = <0x1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "user";
+				reg = <0x0 0x7800000>;
+			};
+			partition@7800000 {
+				label = "firmware";
+				reg = <0x7800000 0x800000>;
+				read-only;
+			};
+		};
 
 		nvram@3,0 {
 			device_type = "nvram";
@@ -305,6 +339,22 @@ mpic: pic@40000 {
 			device_type = "open-pic";
 		};
 
+		msi@41600 {
+			compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
 		global-utilities@e0000 {
 			compatible = "fsl,mpc8641-guts";
 			reg = <0xe0000 0x1000>;

arch/powerpc/boot/dts/glacier.dts

 /*
  * Device Tree Source for AMCC Glacier (460GT)
  *
- * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ * Copyright 2008-2010 DENX Software Engineering, Stefan Roese <sr@denx.de>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without
@@ -42,6 +42,7 @@ cpu@0 {
 			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
+			next-level-cache = <&L2C0>;
 		};
 	};
 
@@ -106,6 +107,16 @@ CPR0: cpr {
 		dcr-reg = <0x00c 0x002>;
 	};
 
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-460gt", "ibm,l2-cache";
+		dcr-reg = <0x020 0x008		/* Internal SRAM DCR's */
+			   0x030 0x008>;	/* L2 cache DCR's */
+		cache-line-size = <32>;		/* 32 bytes */
+		cache-size = <262144>;		/* L2, 256K */
+		interrupt-parent = <&UIC1>;
+		interrupts = <11 1>;
+	};
+
 	plb {
 		compatible = "ibm,plb-460gt", "ibm,plb4";
 		#address-cells = <2>;
@@ -118,6 +129,13 @@ SDRAM0: sdram {
 			dcr-reg = <0x010 0x002>;
 		};
 
+		CRYPTO: crypto@180000 {
+			compatible = "amcc,ppc460gt-crypto", "amcc,ppc4xx-crypto";
+			reg = <4 0x00180000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x1d 0x4>;
+		};
+
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
 			dcr-reg = <0x180 0x062>;
@@ -186,6 +204,29 @@ partition@3fa0000 {
 						reg = <0x03fa0000 0x00060000>;
 					};
 				};
+
+				ndfc@3,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000003 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x00100000>;
+						};
+						partition@100000 {
+							label = "user";
+							reg = <0x00000000 0x03f00000>;
+						};
+					};
+				};
 			};
 
 			UART0: serial@ef600300 {
@@ -237,6 +278,20 @@ IIC0: i2c@ef600700 {
 				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rtc@68 {
+					compatible = "stm,m41t80";
+					reg = <0x68>;
+					interrupt-parent = <&UIC2>;
+					interrupts = <0x19 0x8>;
+				};
+				sttm@48 {
+					compatible = "ad,ad7414";
+					reg = <0x48>;
+					interrupt-parent = <&UIC1>;
+					interrupts = <0x14 0x8>;
+				};
 			};
 
 			IIC1: i2c@ef600800 {
@@ -275,7 +330,7 @@ TAH1: emac-tah@ef601450 {
 
 			EMAC0: ethernet@ef600e00 {
 				device_type = "network";
-				compatible = "ibm,emac-460gt", "ibm,emac4";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
 				interrupt-parent = <&EMAC0>;
 				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
@@ -283,7 +338,7 @@ EMAC0: ethernet@ef600e00 {
 				#size-cells = <0>;
 				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
 						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
-				reg = <0xef600e00 0x00000074>;
+				reg = <0xef600e00 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
@@ -305,7 +360,7 @@ EMAC0: ethernet@ef600e00 {
 
 			EMAC1: ethernet@ef600f00 {
 				device_type = "network";
-				compatible = "ibm,emac-460gt", "ibm,emac4";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
 				interrupt-parent = <&EMAC1>;
 				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
@@ -313,7 +368,7 @@ EMAC1: ethernet@ef600f00 {
 				#size-cells = <0>;
 				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
 						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
-				reg = <0xef600f00 0x00000074>;
+				reg = <0xef600f00 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
@@ -336,7 +391,7 @@ EMAC1: ethernet@ef600f00 {
 
 			EMAC2: ethernet@ef601100 {
 				device_type = "network";
-				compatible = "ibm,emac-460gt", "ibm,emac4";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
 				interrupt-parent = <&EMAC2>;
 				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
@@ -344,7 +399,7 @@ EMAC2: ethernet@ef601100 {
 				#size-cells = <0>;
 				interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
 						 /*Wake*/   0x1 &UIC2 0x16 0x4>;
-				reg = <0xef601100 0x00000074>;
+				reg = <0xef601100 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2>;
@@ -366,7 +421,7 @@ EMAC2: ethernet@ef601100 {
 
 			EMAC3: ethernet@ef601200 {
 				device_type = "network";
-				compatible = "ibm,emac-460gt", "ibm,emac4";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
 				interrupt-parent = <&EMAC3>;
 				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
@@ -374,7 +429,7 @@ EMAC3: ethernet@ef601200 {
 				#size-cells = <0>;
 				interrupt-map = </*Status*/ 0x0 &UIC2 0x13 0x4
 						 /*Wake*/   0x1 &UIC2 0x17 0x4>;
-				reg = <0xef601200 0x00000074>;
+				reg = <0xef601200 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <3>;
@@ -414,6 +469,7 @@ PCIX0: pci@c0ec00000 {
 			 * later cannot be changed
 			 */
 			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000
 				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
@@ -444,6 +500,7 @@ PCIE0: pciex@d00000000 {
 			 * later cannot be changed
 			 */
 			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
 				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
@@ -485,6 +542,7 @@ PCIE1: pciex@d20000000 {
 			 * later cannot be changed
 			 */
 			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000
 				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */

arch/powerpc/boot/dts/katmai.dts

@@ -156,7 +156,7 @@ POB0: opb {
 			compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0x00000000 0x00000004 0xe0000000 0x20000000>;
+			ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
@@ -165,14 +165,47 @@ EBC0: ebc {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
+				/* ranges property is supplied by U-Boot */
 				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x01000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "root";
+						reg = <0x00200000 0x00200000>;
+					};
+					partition@400000 {
+						label = "user";
+						reg = <0x00400000 0x00b60000>;
+					};
+					partition@f60000 {
+						label = "env";
+						reg = <0x00f60000 0x00040000>;
+					};
+					partition@fa0000 {
+						label = "u-boot";
+						reg = <0x00fa0000 0x00060000>;
+					};
+				};
 			};
 
-			UART0: serial@10000200 {
+			UART0: serial@f0000200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <0x10000200 0x00000008>;
+				reg = <0xf0000200 0x00000008>;
 				virtual-reg = <0xa0000200>;
 				clock-frequency = <0>; /* Filled in by zImage */
 				current-speed = <115200>;
@@ -180,10 +213,10 @@ UART0: serial@10000200 {
 				interrupts = <0x0 0x4>;
 			};
 
-			UART1: serial@10000300 {
+			UART1: serial@f0000300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <0x10000300 0x00000008>;
+				reg = <0xf0000300 0x00000008>;
 				virtual-reg = <0xa0000300>;
 				clock-frequency = <0>;
 				current-speed = <0>;
@@ -192,10 +225,10 @@ UART1: serial@10000300 {
 			};
 
 
-			UART2: serial@10000600 {
+			UART2: serial@f0000600 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <0x10000600 0x00000008>;
+				reg = <0xf0000600 0x00000008>;
 				virtual-reg = <0xa0000600>;
 				clock-frequency = <0>;
 				current-speed = <0>;
@@ -203,27 +236,27 @@ UART2: serial@10000600 {
 				interrupts = <0x5 0x4>;
 			};
 
-			IIC0: i2c@10000400 {
+			IIC0: i2c@f0000400 {
 				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
-				reg = <0x10000400 0x00000014>;
+				reg = <0xf0000400 0x00000014>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x2 0x4>;
 			};
 
-			IIC1: i2c@10000500 {
+			IIC1: i2c@f0000500 {
 				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
-				reg = <0x10000500 0x00000014>;
+				reg = <0xf0000500 0x00000014>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x3 0x4>;
 			};
 
-			EMAC0: ethernet@10000800 {
+			EMAC0: ethernet@f0000800 {
 				linux,network-index = <0x0>;
 				device_type = "network";
 				compatible = "ibm,emac-440spe", "ibm,emac4";
 				interrupt-parent = <&UIC1>;
 				interrupts = <0x1c 0x4 0x1d 0x4>;
-				reg = <0x10000800 0x00000074>;
+				reg = <0xf0000800 0x00000074>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
@@ -248,11 +281,11 @@ PCIX0: pci@c0ec00000 {
 			primary;
 			large-inbound-windows;
 			enable-msi-hole;
-			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
-			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
-			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
-			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
-			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
+			reg = <0x0000000c 0x0ec00000 0x00000008   /* Config space access */
+			       0x00000000 0x00000000 0x00000000   /* no IACK cycles */
+			       0x0000000c 0x0ed00000 0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100   /* Internal registers */
+			       0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
@@ -453,6 +486,6 @@ xor-accel@400200000 {
 	};
 
 	chosen {
-		linux,stdout-path = "/plb/opb/serial@10000200";
+		linux,stdout-path = "/plb/opb/serial@f0000200";
 	};
 };

arch/powerpc/boot/dts/mpc5121ads.dts

@@ -62,17 +62,12 @@ nfc@40000000 {
 		interrupt-parent = < &ipic >;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		bank-width = <1>;
 		// ADS has two Hynix 512MB Nand flash chips in a single
-		// stacked package .
+		// stacked package.
 		chips = <2>;
-		nand0@0 {
-			label = "nand0";
-			reg = <0x00000000 0x02000000>; 	// first 32 MB of chip 0
-		};
-		nand1@20000000 {
-			label = "nand1";
-			reg = <0x20000000 0x02000000>; 	// first 32 MB of chip 1
+		nand@0 {
+			label = "nand";
+			reg = <0x00000000 0x40000000>;	// 512MB + 512MB
 		};
 	};
 
@@ -166,6 +161,11 @@ rtc@a00 {	// Real time clock
 			interrupt-parent = < &ipic >;
 		};
 
+		reset@e00 {	// Reset module
+			compatible = "fsl,mpc5121-reset";
+			reg = <0xe00 0x100>;
+		};
+
 		clock@f00 {	// Clock control
 			compatible = "fsl,mpc5121-clock";
 			reg = <0xf00 0x100>;
@@ -185,17 +185,15 @@ gpio@1100 {
 			interrupt-parent = < &ipic >;
 		};
 
-		mscan@1300 {
+		can@1300 {
 			compatible = "fsl,mpc5121-mscan";
-			cell-index = <0>;
 			interrupts = <12 0x8>;
 			interrupt-parent = < &ipic >;
 			reg = <0x1300 0x80>;
 		};
 
-		mscan@1380 {
+		can@1380 {
 			compatible = "fsl,mpc5121-mscan";
-			cell-index = <1>;
 			interrupts = <13 0x8>;
 			interrupt-parent = < &ipic >;
 			reg = <0x1380 0x80>;
@@ -205,17 +203,31 @@ i2c@1700 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			cell-index = <0>;
 			reg = <0x1700 0x20>;
 			interrupts = <9 0x8>;
 			interrupt-parent = < &ipic >;
+			fsl,preserve-clocking;
+
+			hwmon@4a {
+				compatible = "adi,ad7414";
+				reg = <0x4a>;
+			};
+
+			eeprom@50 {
+				compatible = "at,24c32";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "stm,m41t62";
+				reg = <0x68>;
+			};
 		};
 
 		i2c@1720 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			cell-index = <1>;
 			reg = <0x1720 0x20>;
 			interrupts = <10 0x8>;
 			interrupt-parent = < &ipic >;
@@ -225,7 +237,6 @@ i2c@1740 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			cell-index = <2>;
 			reg = <0x1740 0x20>;
 			interrupts = <11 0x8>;
 			interrupt-parent = < &ipic >;
@@ -244,7 +255,7 @@ axe@2000 {
 		};
 
 		display@2100 {
-			compatible = "fsl,mpc5121-diu", "fsl-diu";
+			compatible = "fsl,mpc5121-diu";
 			reg = <0x2100 0x100>;
 			interrupts = <64 0x8>;
 			interrupt-parent = < &ipic >;
@@ -277,7 +288,7 @@ ethernet@2800 {
 
 		// USB1 using external ULPI PHY
 		//usb@3000 {
-		//	compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+		//	compatible = "fsl,mpc5121-usb2-dr";
 		//	reg = <0x3000 0x1000>;
 		//	#address-cells = <1>;
 		//	#size-cells = <0>;
@@ -285,12 +296,11 @@ ethernet@2800 {
 		//	interrupts = <43 0x8>;
 		//	dr_mode = "otg";
 		//	phy_type = "ulpi";
-		//	port1;
 		//};
 
 		// USB0 using internal UTMI PHY
 		usb@4000 {
-			compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+			compatible = "fsl,mpc5121-usb2-dr";
 			reg = <0x4000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -298,7 +308,8 @@ usb@4000 {
 			interrupts = <44 0x8>;
 			dr_mode = "otg";
 			phy_type = "utmi_wide";
-			port0;
+			fsl,invert-drvvbus;
+			fsl,invert-pwr-fault;
 		};
 
 		// IO control
@@ -365,7 +376,7 @@ pscfifo@11f00 {
 		};
 
 		dma@14000 {
-			compatible = "fsl,mpc5121-dma2";
+			compatible = "fsl,mpc5121-dma";
 			reg = <0x14000 0x1800>;
 			interrupts = <65 0x8>;
 			interrupt-parent = < &ipic >;

arch/powerpc/boot/dts/mpc8568mds.dts

@@ -54,9 +54,52 @@ memory {
 		reg = <0x0 0x10000000>;
 	};
 
-	bcsr@f8000000 {
-		compatible = "fsl,mpc8568mds-bcsr";
-		reg = <0xf8000000 0x8000>;
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		reg = <0xe0005000 0x1000>;
+
+		ranges = <0x0 0x0 0xfe000000 0x02000000
+			  0x1 0x0 0xf8000000 0x00008000
+			  0x2 0x0 0xf0000000 0x04000000
+			  0x4 0x0 0xf8008000 0x00008000
+			  0x5 0x0 0xf8010000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x02000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+
+		bcsr@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8568mds-bcsr";
+			reg = <1 0 0x8000>;
+			ranges = <0 1 0 0x8000>;
+
+			bcsr5: gpio-controller@11 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8568mds-bcsr-gpio";
+				reg = <0x5 0x1>;
+				gpio-controller;
+			};
+		};
+
+		pib@4,0 {
+			compatible = "fsl,mpc8568mds-pib";
+			reg = <4 0 0x8000>;
+		};
+
+		pib@5,0 {
+			compatible = "fsl,mpc8568mds-pib";
+			reg = <5 0 0x8000>;
+		};
 	};
 
 	soc8568@e0000000 {
@@ -610,4 +653,20 @@ rio0: rapidio@e00c00000 {
 		sleep = <&pmc 0x00080000   /* controller */
 			 &pmc 0x00040000>; /* message unit */
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			gpios = <&bcsr5 1 0>;
+		};
+
+		amber {
+			gpios = <&bcsr5 2 0>;
+		};
+
+		red {
+			gpios = <&bcsr5 3 0>;
+		};
+	};
 };

arch/powerpc/configs/44x/katmai_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc1
-# Mon Jan  4 14:55:34 2010
+# Linux kernel version: 2.6.33-rc5
+# Tue Jan 26 14:40:58 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -106,6 +106,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -442,7 +443,90 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -500,7 +584,7 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -763,7 +847,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -820,6 +903,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set

arch/powerpc/configs/86xx/gef_ppc9a_defconfig

@@ -1557,7 +1557,52 @@ CONFIG_RTC_DRV_RX8581=y
 #
 # TI VLYNQ
 #
-# CONFIG_STAGING is not set
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+# CONFIG_ET131X is not set
+# CONFIG_ME4000 is not set
+# CONFIG_MEILHAUS is not set
+# CONFIG_USB_IP_COMMON is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+# CONFIG_ASUS_OLED is not set
+# CONFIG_ALTERA_PCIE_CHDMA is not set
+# CONFIG_INPUT_MIMIO is not set
+# CONFIG_TRANZPORT is not set
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+# CONFIG_DST is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_B3DFG is not set
+# CONFIG_IDE_PHISON is not set
+# CONFIG_PLAN9AUTH is not set
+# CONFIG_HECI is not set
+# CONFIG_USB_CPC is not set
+
+#
+# Qualcomm MSM Camera And Video
+#
+
+#
+# Camera Sensor Selection
+#
+# CONFIG_HYPERV_STORAGE is not set
+# CONFIG_HYPERV_BLOCK is not set
+# CONFIG_HYPERV_NET is not set
+CONFIG_VME_BUS=y
+
+#
+# VME Bridge Drivers
+#
+CONFIG_VME_TSI148=y
+
+#
+# VME Device Drivers
+#
+# CONFIG_VME_USER is not set
 
 #
 # File systems

arch/powerpc/configs/86xx/gef_sbc610_defconfig

@@ -265,7 +265,7 @@ CONFIG_MMIO_NVRAM=y
 #
 # Kernel options
 #
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -651,7 +651,7 @@ CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
 
 #
@@ -671,13 +671,9 @@ CONFIG_MTD_BLOCK=y
 # RAM/ROM/Flash chip drivers
 #
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_LE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -688,7 +684,6 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 # CONFIG_MTD_CFI_STAA is not set
@@ -1652,7 +1647,44 @@ CONFIG_RTC_DRV_RX8581=y
 #
 # TI VLYNQ
 #
-# CONFIG_STAGING is not set
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+# CONFIG_ET131X is not set
+# CONFIG_ME4000 is not set
+# CONFIG_MEILHAUS is not set
+# CONFIG_USB_IP_COMMON is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+# CONFIG_ASUS_OLED is not set
+# CONFIG_ALTERA_PCIE_CHDMA is not set
+# CONFIG_INPUT_MIMIO is not set
+# CONFIG_TRANZPORT is not set
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+# CONFIG_DST is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_B3DFG is not set
+# CONFIG_IDE_PHISON is not set
+# CONFIG_PLAN9AUTH is not set
+# CONFIG_HECI is not set
+# CONFIG_VT6655 is not set
+# CONFIG_USB_CPC is not set
+# CONFIG_RDC_17F3101X is not set
+CONFIG_VME_BUS=y
+
+#
+# VME Bridge Drivers
+#
+# CONFIG_VME_CA91CX42 is not set
+CONFIG_VME_TSI148=y
+
+#
+# VME Device Drivers
+#
+# CONFIG_VME_USER is not set
 
 #
 # File systems
@@ -1729,7 +1761,17 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1874,6 +1916,7 @@ CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set

arch/powerpc/configs/ppc64_defconfig

@@ -137,8 +137,9 @@ CONFIG_TRACEPOINTS=y
 CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
+CONFIG_KPROBES=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_KRETPROBES=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
@@ -191,6 +192,7 @@ CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
 CONFIG_PPC_SMLPAR=y
 CONFIG_CMM=y
+CONFIG_DTL=y
 CONFIG_PPC_ISERIES=y
 
 #
@@ -328,9 +330,10 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
 # CONFIG_PHYP_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
-# CONFIG_NUMA is not set
+CONFIG_NUMA=y
+CONFIG_NODES_SHIFT=8
+CONFIG_MAX_ACTIVE_REGIONS=256
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -339,6 +342,7 @@ CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_SPARSEMEM=y
+CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
@@ -354,11 +358,12 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_NODES_SPAN_OTHER_NODES=y
 CONFIG_ARCH_MEMORY_PROBE=y
 CONFIG_PPC_HAS_HASH_64K=y
 # CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=13
-# CONFIG_SCHED_SMT is not set
+CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 CONFIG_EXTRA_TARGETS=""
@@ -790,12 +795,12 @@ CONFIG_SCSI_IPR=y
 CONFIG_SCSI_IPR_TRACE=y
 CONFIG_SCSI_IPR_DUMP=y
 # CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
+CONFIG_SCSI_QLA_FC=m
 # CONFIG_SCSI_QLA_ISCSI is not set
 CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
-CONFIG_SCSI_DEBUG=m
+# CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
@@ -867,9 +872,8 @@ CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_RAID456=y
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
@@ -984,7 +988,7 @@ CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000E is not set
+CONFIG_E1000E=m
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -1006,19 +1010,19 @@ CONFIG_GELIC_WIRELESS=y
 # CONFIG_ATL1E is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T3=m
 CONFIG_EHEA=m
 # CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
+CONFIG_IXGBE=m
 CONFIG_IXGB=m
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
+CONFIG_S2IO=m
+CONFIG_MYRI10GE=m
+CONFIG_NETXEN_NIC=m
 # CONFIG_NIU is not set
 CONFIG_PASEMI_MAC=y
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
@@ -1169,7 +1173,7 @@ CONFIG_SERIAL_TXX9=y
 CONFIG_HAS_TXX9_SERIAL=y
 CONFIG_SERIAL_TXX9_NR_UARTS=6
 CONFIG_SERIAL_TXX9_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_JSM=m
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
@@ -1586,7 +1590,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
+CONFIG_USB_MON=m
 # CONFIG_USB_WUSB is not set
 # CONFIG_USB_WUSB_CBAF is not set
 
@@ -1686,21 +1690,22 @@ CONFIG_USB_APPLEDISPLAY=m
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_INFINIBAND=m
-# CONFIG_INFINIBAND_USER_MAD is not set
-# CONFIG_INFINIBAND_USER_ACCESS is not set
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
 CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_IPATH is not set
+CONFIG_INFINIBAND_IPATH=m
 CONFIG_INFINIBAND_EHCA=m
 # CONFIG_INFINIBAND_AMSO1100 is not set
-# CONFIG_MLX4_INFINIBAND is not set
+CONFIG_MLX4_INFINIBAND=m
 # CONFIG_INFINIBAND_NES is not set
 CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_CM=y
 CONFIG_INFINIBAND_IPOIB_DEBUG=y
 # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
-# CONFIG_INFINIBAND_SRP is not set
+CONFIG_INFINIBAND_SRP=m
 CONFIG_INFINIBAND_ISER=m
 CONFIG_EDAC=y
 
@@ -1798,7 +1803,7 @@ CONFIG_REISERFS_FS=y
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=y
+CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
 CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_DEBUG is not set
@@ -1811,14 +1816,22 @@ CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
 # CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_STATS=y
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -1851,7 +1864,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -2075,7 +2088,7 @@ CONFIG_XMON=y
 CONFIG_XMON_DISASSEMBLY=y
 CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
-# CONFIG_VIRQ_DEBUG is not set
+CONFIG_VIRQ_DEBUG=y
 CONFIG_BOOTX_TEXT=y
 # CONFIG_PPC_EARLY_DEBUG is not set
 

arch/powerpc/configs/pseries_defconfig

@@ -159,7 +159,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
@@ -191,6 +191,7 @@ CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
 CONFIG_PPC_SMLPAR=y
 CONFIG_CMM=y
+CONFIG_DTL=y
 # CONFIG_PPC_ISERIES is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
@@ -255,7 +256,8 @@ CONFIG_KEXEC=y
 # CONFIG_PHYP_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=4
+CONFIG_NODES_SHIFT=8
+CONFIG_MAX_ACTIVE_REGIONS=256
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
@@ -270,7 +272,9 @@ CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPARSEMEM_VMEMMAP=y
-# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
@@ -705,7 +709,7 @@ CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
-# CONFIG_MD_RAID456 is not set
+CONFIG_MD_RAID456=m
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
@@ -800,7 +804,7 @@ CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000E is not set
+CONFIG_E1000E=m
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -818,18 +822,18 @@ CONFIG_TIGON3=y
 # CONFIG_ATL1E is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T3=m
 CONFIG_EHEA=y
 # CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
+CONFIG_IXGBE=m
 CONFIG_IXGB=m
 CONFIG_S2IO=m
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
+CONFIG_MYRI10GE=m
+CONFIG_NETXEN_NIC=m
 # CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
@@ -894,7 +898,7 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
 #
@@ -1271,7 +1275,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_MON=y
+CONFIG_USB_MON=m
 # CONFIG_USB_WUSB is not set
 # CONFIG_USB_WUSB_CBAF is not set
 
@@ -1311,7 +1315,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # may also be needed; see USB_STORAGE Help for more information
 #
-CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
@@ -1322,7 +1326,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
-CONFIG_USB_STORAGE_ONETOUCH=y
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -1377,17 +1381,17 @@ CONFIG_INFINIBAND_USER_MEM=y
 CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_IPATH is not set
+CONFIG_INFINIBAND_IPATH=m
 CONFIG_INFINIBAND_EHCA=m
 # CONFIG_INFINIBAND_AMSO1100 is not set
-# CONFIG_MLX4_INFINIBAND is not set
+CONFIG_MLX4_INFINIBAND=m
 # CONFIG_INFINIBAND_NES is not set
 CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_CM=y
 CONFIG_INFINIBAND_IPOIB_DEBUG=y
 # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
 CONFIG_INFINIBAND_SRP=m
-# CONFIG_INFINIBAND_ISER is not set
+CONFIG_INFINIBAND_ISER=m
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
@@ -1443,6 +1447,9 @@ CONFIG_OCFS2_FS_STATS=y
 CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_OCFS2_DEBUG_FS is not set
 # CONFIG_OCFS2_COMPAT_JBD is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1455,8 +1462,8 @@ CONFIG_FUSE_FS=m
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -1508,14 +1515,14 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-CONFIG_NFSD=y
+CONFIG_NFSD=m
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
+CONFIG_EXPORTFS=m
 CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
@@ -1681,12 +1688,12 @@ CONFIG_DYNAMIC_PRINTK_DEBUG=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_HCALL_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
+CONFIG_CODE_PATCHING_SELFTEST=y
+CONFIG_FTR_FIXUP_SELFTEST=y
+CONFIG_MSI_BITMAP_SELFTEST=y
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 CONFIG_XMON_DISASSEMBLY=y

arch/powerpc/include/asm/asm-compat.h

@@ -2,6 +2,7 @@
 #define _ASM_POWERPC_ASM_COMPAT_H
 
 #include <asm/types.h>
+#include <asm/ppc-opcode.h>
 
 #ifdef __ASSEMBLY__
 #  define stringify_in_c(...)	__VA_ARGS__
@@ -24,7 +25,7 @@
 #define PPC_LONG	stringify_in_c(.llong)
 #define PPC_LONG_ALIGN	stringify_in_c(.balign 8)
 #define PPC_TLNEI	stringify_in_c(tdnei)
-#define PPC_LLARX	stringify_in_c(ldarx)
+#define PPC_LLARX(t, a, b, eh)	PPC_LDARX(t, a, b, eh)
 #define PPC_STLCX	stringify_in_c(stdcx.)
 #define PPC_CNTLZL	stringify_in_c(cntlzd)
 
@@ -46,7 +47,7 @@
 #define PPC_LONG	stringify_in_c(.long)
 #define PPC_LONG_ALIGN	stringify_in_c(.balign 4)
 #define PPC_TLNEI	stringify_in_c(twnei)
-#define PPC_LLARX	stringify_in_c(lwarx)
+#define PPC_LLARX(t, a, b, eh)	PPC_LWARX(t, a, b, eh)
 #define PPC_STLCX	stringify_in_c(stwcx.)
 #define PPC_CNTLZL	stringify_in_c(cntlzw)
 #define PPC_MTOCRF	stringify_in_c(mtcrf)

arch/powerpc/include/asm/atomic.h

@@ -49,13 +49,13 @@ static __inline__ int atomic_add_return(int a, atomic_t *v)
 	int t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%2		# atomic_add_return\n\
 	add	%0,%1,%0\n"
 	PPC405_ERR77(0,%2)
 "	stwcx.	%0,0,%2 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -85,13 +85,13 @@ static __inline__ int atomic_sub_return(int a, atomic_t *v)
 	int t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%2		# atomic_sub_return\n\
 	subf	%0,%1,%0\n"
 	PPC405_ERR77(0,%2)
 "	stwcx.	%0,0,%2 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -119,13 +119,13 @@ static __inline__ int atomic_inc_return(atomic_t *v)
 	int t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%1		# atomic_inc_return\n\
 	addic	%0,%0,1\n"
 	PPC405_ERR77(0,%1)
 "	stwcx.	%0,0,%1 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -163,13 +163,13 @@ static __inline__ int atomic_dec_return(atomic_t *v)
 	int t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%1		# atomic_dec_return\n\
 	addic	%0,%0,-1\n"
 	PPC405_ERR77(0,%1)
 "	stwcx.	%0,0,%1\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -194,7 +194,7 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 	int t;
 
 	__asm__ __volatile__ (
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%1		# atomic_add_unless\n\
 	cmpw	0,%0,%3 \n\
 	beq-	2f \n\
@@ -202,7 +202,7 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 	PPC405_ERR77(0,%2)
 "	stwcx.	%0,0,%1 \n\
 	bne-	1b \n"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 "	subf	%0,%2,%0 \n\
 2:"
 	: "=&r" (t)
@@ -227,7 +227,7 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v)
 	int t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%1		# atomic_dec_if_positive\n\
 	cmpwi	%0,1\n\
 	addi	%0,%0,-1\n\
@@ -235,7 +235,7 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v)
 	PPC405_ERR77(0,%1)
 "	stwcx.	%0,0,%1\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	"\n\
 2:"	: "=&b" (t)
 	: "r" (&v->counter)
@@ -286,12 +286,12 @@ static __inline__ long atomic64_add_return(long a, atomic64_t *v)
 	long t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%2		# atomic64_add_return\n\
 	add	%0,%1,%0\n\
 	stdcx.	%0,0,%2 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -320,12 +320,12 @@ static __inline__ long atomic64_sub_return(long a, atomic64_t *v)
 	long t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%2		# atomic64_sub_return\n\
 	subf	%0,%1,%0\n\
 	stdcx.	%0,0,%2 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -352,12 +352,12 @@ static __inline__ long atomic64_inc_return(atomic64_t *v)
 	long t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%1		# atomic64_inc_return\n\
 	addic	%0,%0,1\n\
 	stdcx.	%0,0,%1 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -394,12 +394,12 @@ static __inline__ long atomic64_dec_return(atomic64_t *v)
 	long t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%1		# atomic64_dec_return\n\
 	addic	%0,%0,-1\n\
 	stdcx.	%0,0,%1\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -419,13 +419,13 @@ static __inline__ long atomic64_dec_if_positive(atomic64_t *v)
 	long t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%1		# atomic64_dec_if_positive\n\
 	addic.	%0,%0,-1\n\
 	blt-	2f\n\
 	stdcx.	%0,0,%1\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	"\n\
 2:"	: "=&r" (t)
 	: "r" (&v->counter)
@@ -451,14 +451,14 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
 	long t;
 
 	__asm__ __volatile__ (
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%1		# atomic_add_unless\n\
 	cmpd	0,%0,%3 \n\
 	beq-	2f \n\
 	add	%0,%2,%0 \n"
 "	stdcx.	%0,0,%1 \n\
 	bne-	1b \n"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 "	subf	%0,%2,%0 \n\
 2:"
 	: "=&r" (t)

arch/powerpc/include/asm/bitops.h

@@ -65,7 +65,7 @@ static __inline__ void fn(unsigned long mask,	\
 	unsigned long *p = (unsigned long *)_p;	\
 	__asm__ __volatile__ (			\
 	prefix					\
-"1:"	PPC_LLARX "%0,0,%3\n"			\
+"1:"	PPC_LLARX(%0,0,%3,0) "\n"		\
 	stringify_in_c(op) "%0,%0,%2\n"		\
 	PPC405_ERR77(0,%3)			\
 	PPC_STLCX "%0,0,%3\n"			\
@@ -78,7 +78,7 @@ static __inline__ void fn(unsigned long mask,	\
 
 DEFINE_BITOP(set_bits, or, "", "")
 DEFINE_BITOP(clear_bits, andc, "", "")
-DEFINE_BITOP(clear_bits_unlock, andc, LWSYNC_ON_SMP, "")
+DEFINE_BITOP(clear_bits_unlock, andc, PPC_RELEASE_BARRIER, "")
 DEFINE_BITOP(change_bits, xor, "", "")
 
 static __inline__ void set_bit(int nr, volatile unsigned long *addr)
@@ -103,31 +103,35 @@ static __inline__ void change_bit(int nr, volatile unsigned long *addr)
 
 /* Like DEFINE_BITOP(), with changes to the arguments to 'op' and the output
  * operands. */
-#define DEFINE_TESTOP(fn, op, prefix, postfix)	\
-static __inline__ unsigned long fn(		\
-		unsigned long mask,		\
-		volatile unsigned long *_p)	\
-{						\
-	unsigned long old, t;			\
-	unsigned long *p = (unsigned long *)_p;	\
-	__asm__ __volatile__ (			\
-	prefix					\
-"1:"	PPC_LLARX "%0,0,%3\n"			\
-	stringify_in_c(op) "%1,%0,%2\n"		\
-	PPC405_ERR77(0,%3)			\
-	PPC_STLCX "%1,0,%3\n"			\
-	"bne- 1b\n"				\
-	postfix					\
-	: "=&r" (old), "=&r" (t)		\
-	: "r" (mask), "r" (p)			\
-	: "cc", "memory");			\
-	return (old & mask);			\
+#define DEFINE_TESTOP(fn, op, prefix, postfix, eh)	\
+static __inline__ unsigned long fn(			\
+		unsigned long mask,			\
+		volatile unsigned long *_p)		\
+{							\
+	unsigned long old, t;				\
+	unsigned long *p = (unsigned long *)_p;		\
+	__asm__ __volatile__ (				\
+	prefix						\
+"1:"	PPC_LLARX(%0,0,%3,eh) "\n"			\
+	stringify_in_c(op) "%1,%0,%2\n"			\
+	PPC405_ERR77(0,%3)				\
+	PPC_STLCX "%1,0,%3\n"				\
+	"bne- 1b\n"					\
+	postfix						\
+	: "=&r" (old), "=&r" (t)			\
+	: "r" (mask), "r" (p)				\
+	: "cc", "memory");				\
+	return (old & mask);				\
 }
 
-DEFINE_TESTOP(test_and_set_bits, or, LWSYNC_ON_SMP, ISYNC_ON_SMP)
-DEFINE_TESTOP(test_and_set_bits_lock, or, "", ISYNC_ON_SMP)
-DEFINE_TESTOP(test_and_clear_bits, andc, LWSYNC_ON_SMP, ISYNC_ON_SMP)
-DEFINE_TESTOP(test_and_change_bits, xor, LWSYNC_ON_SMP, ISYNC_ON_SMP)
+DEFINE_TESTOP(test_and_set_bits, or, PPC_RELEASE_BARRIER,
+	      PPC_ACQUIRE_BARRIER, 0)
+DEFINE_TESTOP(test_and_set_bits_lock, or, "",
+	      PPC_ACQUIRE_BARRIER, 1)
+DEFINE_TESTOP(test_and_clear_bits, andc, PPC_RELEASE_BARRIER,
+	      PPC_ACQUIRE_BARRIER, 0)
+DEFINE_TESTOP(test_and_change_bits, xor, PPC_RELEASE_BARRIER,
+	      PPC_ACQUIRE_BARRIER, 0)
 
 static __inline__ int test_and_set_bit(unsigned long nr,
 				       volatile unsigned long *addr)
@@ -158,7 +162,7 @@ static __inline__ int test_and_change_bit(unsigned long nr,
 
 static __inline__ void __clear_bit_unlock(int nr, volatile unsigned long *addr)
 {
-	__asm__ __volatile__(LWSYNC_ON_SMP "" ::: "memory");
+	__asm__ __volatile__(PPC_RELEASE_BARRIER "" ::: "memory");
 	__clear_bit(nr, addr);
 }
 

arch/powerpc/include/asm/cputable.h

@@ -381,9 +381,9 @@ extern const char *powerpc_base_platform;
 #define CPU_FTRS_GENERIC_32	(CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
 
 /* 64-bit CPUs */
-#define CPU_FTRS_POWER3	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+#define CPU_FTRS_POWER3	(CPU_FTR_USE_TB | \
 	    CPU_FTR_IABR | CPU_FTR_PPC_LE)
-#define CPU_FTRS_RS64	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+#define CPU_FTRS_RS64	(CPU_FTR_USE_TB | \
 	    CPU_FTR_IABR | \
 	    CPU_FTR_MMCRA | CPU_FTR_CTRL)
 #define CPU_FTRS_POWER4	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \

arch/powerpc/include/asm/cputime.h

@@ -73,10 +73,9 @@ static inline unsigned long cputime_to_jiffies(const cputime_t ct)
 static inline cputime_t cputime_to_scaled(const cputime_t ct)
 {
 	if (cpu_has_feature(CPU_FTR_SPURR) &&
-	    per_cpu(cputime_last_delta, smp_processor_id()))
-		return ct *
-			per_cpu(cputime_scaled_last_delta, smp_processor_id())/
-			per_cpu(cputime_last_delta, smp_processor_id());
+	    __get_cpu_var(cputime_last_delta))
+		return ct * __get_cpu_var(cputime_scaled_last_delta) /
+			    __get_cpu_var(cputime_last_delta);
 	return ct;
 }
 

arch/powerpc/include/asm/feature-fixups.h

@@ -165,7 +165,7 @@ label##2:						\
 	.pushsection sect,"a";				\
 	.align 2;					\
 label##3:					       	\
-	.long label##1b-label##3b;			\
+	FTR_ENTRY_OFFSET label##1b-label##3b;		\
 	.popsection;
 
 #endif /* __ASM_POWERPC_FEATURE_FIXUPS_H */

arch/powerpc/include/asm/futex.h

@@ -11,7 +11,7 @@
 
 #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
   __asm__ __volatile ( \
-	LWSYNC_ON_SMP \
+	PPC_RELEASE_BARRIER \
 "1:	lwarx	%0,0,%2\n" \
 	insn \
 	PPC405_ERR77(0, %2) \
@@ -90,14 +90,14 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
 		return -EFAULT;
 
         __asm__ __volatile__ (
-        LWSYNC_ON_SMP
+        PPC_RELEASE_BARRIER
 "1:     lwarx   %0,0,%2         # futex_atomic_cmpxchg_inatomic\n\
         cmpw    0,%0,%3\n\
         bne-    3f\n"
         PPC405_ERR77(0,%2)
 "2:     stwcx.  %4,0,%2\n\
         bne-    1b\n"
-        ISYNC_ON_SMP
+        PPC_ACQUIRE_BARRIER
 "3:	.section .fixup,\"ax\"\n\
 4:	li	%0,%5\n\
 	b	3b\n\

arch/powerpc/include/asm/hardirq.h

-#include <asm-generic/hardirq.h>
+#ifndef _ASM_POWERPC_HARDIRQ_H
+#define _ASM_POWERPC_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+	unsigned int timer_irqs;
+	unsigned int pmu_irqs;
+	unsigned int mce_exceptions;
+	unsigned int spurious_irqs;
+} ____cacheline_aligned irq_cpustat_t;
+
+DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
+
+#define __ARCH_IRQ_STAT
+
+#define local_softirq_pending()	__get_cpu_var(irq_stat).__softirq_pending
+
+static inline void ack_bad_irq(unsigned int irq)
+{
+	printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq);
+}
+
+extern u64 arch_irq_stat_cpu(unsigned int cpu);
+#define arch_irq_stat_cpu	arch_irq_stat_cpu
+
+#endif /* _ASM_POWERPC_HARDIRQ_H */

arch/powerpc/include/asm/local.h

@@ -24,7 +24,7 @@ static __inline__ long local_add_return(long a, local_t *l)
 	long t;
 
 	__asm__ __volatile__(
-"1:"	PPC_LLARX	"%0,0,%2		# local_add_return\n\
+"1:"	PPC_LLARX(%0,0,%2,0) "			# local_add_return\n\
 	add	%0,%1,%0\n"
 	PPC405_ERR77(0,%2)
 	PPC_STLCX	"%0,0,%2 \n\
@@ -43,7 +43,7 @@ static __inline__ long local_sub_return(long a, local_t *l)
 	long t;
 
 	__asm__ __volatile__(
-"1:"	PPC_LLARX	"%0,0,%2		# local_sub_return\n\
+"1:"	PPC_LLARX(%0,0,%2,0) "			# local_sub_return\n\
 	subf	%0,%1,%0\n"
 	PPC405_ERR77(0,%2)
 	PPC_STLCX	"%0,0,%2 \n\
@@ -60,7 +60,7 @@ static __inline__ long local_inc_return(local_t *l)
 	long t;
 
 	__asm__ __volatile__(
-"1:"	PPC_LLARX	"%0,0,%1		# local_inc_return\n\
+"1:"	PPC_LLARX(%0,0,%1,0) "			# local_inc_return\n\
 	addic	%0,%0,1\n"
 	PPC405_ERR77(0,%1)
 	PPC_STLCX	"%0,0,%1 \n\
@@ -87,7 +87,7 @@ static __inline__ long local_dec_return(local_t *l)
 	long t;
 
 	__asm__ __volatile__(
-"1:"	PPC_LLARX	"%0,0,%1		# local_dec_return\n\
+"1:"	PPC_LLARX(%0,0,%1,0) "			# local_dec_return\n\
 	addic	%0,%0,-1\n"
 	PPC405_ERR77(0,%1)
 	PPC_STLCX	"%0,0,%1\n\
@@ -117,7 +117,7 @@ static __inline__ int local_add_unless(local_t *l, long a, long u)
 	long t;
 
 	__asm__ __volatile__ (
-"1:"	PPC_LLARX	"%0,0,%1		# local_add_unless\n\
+"1:"	PPC_LLARX(%0,0,%1,0) "			# local_add_unless\n\
 	cmpw	0,%0,%3 \n\
 	beq-	2f \n\
 	add	%0,%2,%0 \n"
@@ -147,7 +147,7 @@ static __inline__ long local_dec_if_positive(local_t *l)
 	long t;
 
 	__asm__ __volatile__(
-"1:"	PPC_LLARX	"%0,0,%1		# local_dec_if_positive\n\
+"1:"	PPC_LLARX(%0,0,%1,0) "			# local_dec_if_positive\n\
 	cmpwi	%0,1\n\
 	addi	%0,%0,-1\n\
 	blt-	2f\n"

arch/powerpc/include/asm/mpc5121.h

+/*
+ * MPC5121 Prototypes and definitions
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.
+ */
+
+#ifndef __ASM_POWERPC_MPC5121_H__
+#define __ASM_POWERPC_MPC5121_H__
+
+/* MPC512x Reset module registers */
+struct mpc512x_reset_module {
+	u32	rcwlr;	/* Reset Configuration Word Low Register */
+	u32	rcwhr;	/* Reset Configuration Word High Register */
+	u32	reserved1;
+	u32	reserved2;
+	u32	rsr;	/* Reset Status Register */
+	u32	rmr;	/* Reset Mode Register */
+	u32	rpr;	/* Reset Protection Register */
+	u32	rcr;	/* Reset Control Register */
+	u32	rcer;	/* Reset Control Enable Register */
+};
+
+#endif /* __ASM_POWERPC_MPC5121_H__ */

arch/powerpc/include/asm/mpc52xx_psc.h

@@ -25,7 +25,11 @@
 #include <asm/types.h>
 
 /* Max number of PSCs */
+#ifdef CONFIG_PPC_MPC512x
+#define MPC52xx_PSC_MAXNUM     12
+#else
 #define MPC52xx_PSC_MAXNUM	6
+#endif
 
 /* Programmable Serial Controller (PSC) status register bits */
 #define MPC52xx_PSC_SR_UNEX_RX	0x0001

arch/powerpc/include/asm/mpic.h

@@ -289,7 +289,7 @@ struct mpic
 #ifdef CONFIG_MPIC_U3_HT_IRQS
 	/* The fixup table */
 	struct mpic_irq_fixup	*fixups;
-	spinlock_t		fixup_lock;
+	raw_spinlock_t	fixup_lock;
 #endif
 
 	/* Register access method */

arch/powerpc/include/asm/mutex.h

@@ -15,7 +15,7 @@ static inline int __mutex_cmpxchg_lock(atomic_t *v, int old, int new)
 	PPC405_ERR77(0,%1)
 "	stwcx.	%3,0,%1\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	"\n\
 2:"
 	: "=&r" (t)
@@ -35,7 +35,7 @@ static inline int __mutex_dec_return_lock(atomic_t *v)
 	PPC405_ERR77(0,%1)
 "	stwcx.	%0,0,%1\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "memory");
@@ -48,7 +48,7 @@ static inline int __mutex_inc_return_unlock(atomic_t *v)
 	int t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%1		# mutex unlock\n\
 	addic	%0,%0,1\n"
 	PPC405_ERR77(0,%1)

arch/powerpc/include/asm/param.h

-#ifndef _ASM_POWERPC_PARAM_H
-#define _ASM_POWERPC_PARAM_H
-
-#ifdef __KERNEL__
-#define HZ		CONFIG_HZ	/* internal kernel timer frequency */
-#define USER_HZ		100		/* for user interfaces in "ticks" */
-#define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
-#endif /* __KERNEL__ */
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif	/* _ASM_POWERPC_PARAM_H */
+#include <asm-generic/param.h>

arch/powerpc/include/asm/pmac_feature.h

@@ -378,7 +378,7 @@ extern struct macio_chip* macio_find(struct device_node* child, int type);
  * Those are exported by pmac feature for internal use by arch code
  * only like the platform function callbacks, do not use directly in drivers
  */
-extern spinlock_t feature_lock;
+extern raw_spinlock_t feature_lock;
 extern struct device_node *uninorth_node;
 extern u32 __iomem *uninorth_base;
 

arch/powerpc/include/asm/ppc-opcode.h

@@ -22,8 +22,10 @@
 #define PPC_INST_DCBZL			0x7c2007ec
 #define PPC_INST_ISEL			0x7c00001e
 #define PPC_INST_ISEL_MASK		0xfc00003e
+#define PPC_INST_LDARX			0x7c0000a8
 #define PPC_INST_LSWI			0x7c0004aa
 #define PPC_INST_LSWX			0x7c00042a
+#define PPC_INST_LWARX			0x7c000029
 #define PPC_INST_LWSYNC			0x7c2004ac
 #define PPC_INST_LXVD2X			0x7c000698
 #define PPC_INST_MCRXR			0x7c000400
@@ -55,15 +57,31 @@
 #define __PPC_RA(a)	(((a) & 0x1f) << 16)
 #define __PPC_RB(b)	(((b) & 0x1f) << 11)
 #define __PPC_RS(s)	(((s) & 0x1f) << 21)
+#define __PPC_RT(s)	__PPC_RS(s)
 #define __PPC_XS(s)	((((s) & 0x1f) << 21) | (((s) & 0x20) >> 5))
 #define __PPC_T_TLB(t)	(((t) & 0x3) << 21)
 #define __PPC_WC(w)	(((w) & 0x3) << 21)
+/*
+ * Only use the larx hint bit on 64bit CPUs. Once we verify it doesn't have
+ * any side effects on all 32bit processors, we can do this all the time.
+ */
+#ifdef CONFIG_PPC64
+#define __PPC_EH(eh)	(((eh) & 0x1) << 0)
+#else
+#define __PPC_EH(eh)	0
+#endif
 
 /* Deal with instructions that older assemblers aren't aware of */
 #define	PPC_DCBAL(a, b)		stringify_in_c(.long PPC_INST_DCBAL | \
 					__PPC_RA(a) | __PPC_RB(b))
 #define	PPC_DCBZL(a, b)		stringify_in_c(.long PPC_INST_DCBZL | \
 					__PPC_RA(a) | __PPC_RB(b))
+#define PPC_LDARX(t, a, b, eh)	stringify_in_c(.long PPC_INST_LDARX | \
+					__PPC_RT(t) | __PPC_RA(a) | \
+					__PPC_RB(b) | __PPC_EH(eh))
+#define PPC_LWARX(t, a, b, eh)	stringify_in_c(.long PPC_INST_LWARX | \
+					__PPC_RT(t) | __PPC_RA(a) | \
+					__PPC_RB(b) | __PPC_EH(eh))
 #define PPC_MSGSND(b)		stringify_in_c(.long PPC_INST_MSGSND | \
 					__PPC_RB(b))
 #define PPC_RFCI		stringify_in_c(.long PPC_INST_RFCI)

arch/powerpc/include/asm/ppc-pci.h

@@ -137,6 +137,11 @@ struct device_node * find_device_pe(struct device_node *dn);
 void eeh_sysfs_add_device(struct pci_dev *pdev);
 void eeh_sysfs_remove_device(struct pci_dev *pdev);
 
+static inline const char *eeh_pci_name(struct pci_dev *pdev) 
+{ 
+	return pdev ? pci_name(pdev) : "<null>";
+} 
+
 #endif /* CONFIG_EEH */
 
 #else /* CONFIG_PCI */

arch/powerpc/include/asm/processor.h

@@ -161,9 +161,41 @@ struct thread_struct {
 #ifdef CONFIG_PPC32
 	void		*pgdir;		/* root of page-table tree */
 #endif
-#if defined(CONFIG_4xx) || defined (CONFIG_BOOKE)
-	unsigned long	dbcr0;		/* debug control register values */
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+	/*
+	 * The following help to manage the use of Debug Control Registers
+	 * om the BookE platforms.
+	 */
+	unsigned long	dbcr0;
 	unsigned long	dbcr1;
+#ifdef CONFIG_BOOKE
+	unsigned long	dbcr2;
+#endif
+	/*
+	 * The stored value of the DBSR register will be the value at the
+	 * last debug interrupt. This register can only be read from the
+	 * user (will never be written to) and has value while helping to
+	 * describe the reason for the last debug trap.  Torez
+	 */
+	unsigned long	dbsr;
+	/*
+	 * The following will contain addresses used by debug applications
+	 * to help trace and trap on particular address locations.
+	 * The bits in the Debug Control Registers above help define which
+	 * of the following registers will contain valid data and/or addresses.
+	 */
+	unsigned long	iac1;
+	unsigned long	iac2;
+#if CONFIG_PPC_ADV_DEBUG_IACS > 2
+	unsigned long	iac3;
+	unsigned long	iac4;
+#endif
+	unsigned long	dac1;
+	unsigned long	dac2;
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+	unsigned long	dvc1;
+	unsigned long	dvc2;
+#endif
 #endif
 	/* FP and VSX 0-31 register set */
 	double		fpr[32][TS_FPRWIDTH];

arch/powerpc/include/asm/ptrace.h

@@ -24,6 +24,12 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stdint.h>
+#endif
+
 #ifndef __ASSEMBLY__
 
 struct pt_regs {
@@ -294,4 +300,75 @@ extern void user_disable_single_step(struct task_struct *);
 
 #define PTRACE_SINGLEBLOCK	0x100	/* resume execution until next branch */
 
+#define PPC_PTRACE_GETHWDBGINFO	0x89
+#define PPC_PTRACE_SETHWDEBUG	0x88
+#define PPC_PTRACE_DELHWDEBUG	0x87
+
+#ifndef __ASSEMBLY__
+
+struct ppc_debug_info {
+	uint32_t version;		/* Only version 1 exists to date */
+	uint32_t num_instruction_bps;
+	uint32_t num_data_bps;
+	uint32_t num_condition_regs;
+	uint32_t data_bp_alignment;
+	uint32_t sizeof_condition;	/* size of the DVC register */
+	uint64_t features;
+};
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * features will have bits indication whether there is support for:
+ */
+#define PPC_DEBUG_FEATURE_INSN_BP_RANGE		0x0000000000000001
+#define PPC_DEBUG_FEATURE_INSN_BP_MASK		0x0000000000000002
+#define PPC_DEBUG_FEATURE_DATA_BP_RANGE		0x0000000000000004
+#define PPC_DEBUG_FEATURE_DATA_BP_MASK		0x0000000000000008
+
+#ifndef __ASSEMBLY__
+
+struct ppc_hw_breakpoint {
+	uint32_t version;		/* currently, version must be 1 */
+	uint32_t trigger_type;		/* only some combinations allowed */
+	uint32_t addr_mode;		/* address match mode */
+	uint32_t condition_mode;	/* break/watchpoint condition flags */
+	uint64_t addr;			/* break/watchpoint address */
+	uint64_t addr2;			/* range end or mask */
+	uint64_t condition_value;	/* contents of the DVC register */
+};
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Trigger Type
+ */
+#define PPC_BREAKPOINT_TRIGGER_EXECUTE	0x00000001
+#define PPC_BREAKPOINT_TRIGGER_READ	0x00000002
+#define PPC_BREAKPOINT_TRIGGER_WRITE	0x00000004
+#define PPC_BREAKPOINT_TRIGGER_RW	\
+	(PPC_BREAKPOINT_TRIGGER_READ | PPC_BREAKPOINT_TRIGGER_WRITE)
+
+/*
+ * Address Mode
+ */
+#define PPC_BREAKPOINT_MODE_EXACT		0x00000000
+#define PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE	0x00000001
+#define PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE	0x00000002
+#define PPC_BREAKPOINT_MODE_MASK		0x00000003
+
+/*
+ * Condition Mode
+ */
+#define PPC_BREAKPOINT_CONDITION_MODE	0x00000003
+#define PPC_BREAKPOINT_CONDITION_NONE	0x00000000
+#define PPC_BREAKPOINT_CONDITION_AND	0x00000001
+#define PPC_BREAKPOINT_CONDITION_EXACT	PPC_BREAKPOINT_CONDITION_AND
+#define PPC_BREAKPOINT_CONDITION_OR	0x00000002
+#define PPC_BREAKPOINT_CONDITION_AND_OR	0x00000003
+#define PPC_BREAKPOINT_CONDITION_BE_ALL	0x00ff0000
+#define PPC_BREAKPOINT_CONDITION_BE_SHIFT	16
+#define PPC_BREAKPOINT_CONDITION_BE(n)	\
+	(1<<((n)+PPC_BREAKPOINT_CONDITION_BE_SHIFT))
+
 #endif /* _ASM_POWERPC_PTRACE_H */

arch/powerpc/include/asm/reg_booke.h

@@ -248,6 +248,8 @@
 #define DBSR_RET	0x00008000	/* Return Debug Event */
 #define DBSR_CIRPT	0x00000040	/* Critical Interrupt Taken Event */
 #define DBSR_CRET	0x00000020	/* Critical Return Debug Event */
+#define DBSR_IAC12ATS	0x00000002	/* Instr Address Compare 1/2 Toggle */
+#define DBSR_IAC34ATS	0x00000001	/* Instr Address Compare 3/4 Toggle */
 #endif
 #ifdef CONFIG_40x
 #define DBSR_IC		0x80000000	/* Instruction Completion */
@@ -313,6 +315,38 @@
 #define DBCR0_IA12T	0x00008000	/* Instr Addr 1-2 range Toggle */
 #define DBCR0_IA34T	0x00004000	/* Instr Addr 3-4 range Toggle */
 #define DBCR0_FT	0x00000001	/* Freeze Timers on debug event */
+
+#define dbcr_iac_range(task)	((task)->thread.dbcr0)
+#define DBCR_IAC12I	DBCR0_IA12			/* Range Inclusive */
+#define DBCR_IAC12X	(DBCR0_IA12 | DBCR0_IA12X)	/* Range Exclusive */
+#define DBCR_IAC12MODE	(DBCR0_IA12 | DBCR0_IA12X)	/* IAC 1-2 Mode Bits */
+#define DBCR_IAC34I	DBCR0_IA34			/* Range Inclusive */
+#define DBCR_IAC34X	(DBCR0_IA34 | DBCR0_IA34X)	/* Range Exclusive */
+#define DBCR_IAC34MODE	(DBCR0_IA34 | DBCR0_IA34X)	/* IAC 3-4 Mode Bits */
+
+/* Bit definitions related to the DBCR1. */
+#define DBCR1_DAC1R	0x80000000	/* DAC1 Read Debug Event */
+#define DBCR1_DAC2R	0x40000000	/* DAC2 Read Debug Event */
+#define DBCR1_DAC1W	0x20000000	/* DAC1 Write Debug Event */
+#define DBCR1_DAC2W	0x10000000	/* DAC2 Write Debug Event */
+
+#define dbcr_dac(task)	((task)->thread.dbcr1)
+#define DBCR_DAC1R	DBCR1_DAC1R
+#define DBCR_DAC1W	DBCR1_DAC1W
+#define DBCR_DAC2R	DBCR1_DAC2R
+#define DBCR_DAC2W	DBCR1_DAC2W
+
+/*
+ * Are there any active Debug Events represented in the
+ * Debug Control Registers?
+ */
+#define DBCR0_ACTIVE_EVENTS	(DBCR0_ICMP | DBCR0_IAC1 | DBCR0_IAC2 | \
+				 DBCR0_IAC3 | DBCR0_IAC4)
+#define DBCR1_ACTIVE_EVENTS	(DBCR1_DAC1R | DBCR1_DAC2R | \
+				 DBCR1_DAC1W | DBCR1_DAC2W)
+#define DBCR_ACTIVE_EVENTS(dbcr0, dbcr1)  (((dbcr0) & DBCR0_ACTIVE_EVENTS) || \
+					   ((dbcr1) & DBCR1_ACTIVE_EVENTS))
+
 #elif defined(CONFIG_BOOKE)
 #define DBCR0_EDM	0x80000000	/* External Debug Mode */
 #define DBCR0_IDM	0x40000000	/* Internal Debug Mode */
@@ -342,19 +376,79 @@
 #define DBCR0_CRET	0x00000020	/* Critical Return Debug Event */
 #define DBCR0_FT	0x00000001	/* Freeze Timers on debug event */
 
+#define dbcr_dac(task)	((task)->thread.dbcr0)
+#define DBCR_DAC1R	DBCR0_DAC1R
+#define DBCR_DAC1W	DBCR0_DAC1W
+#define DBCR_DAC2R	DBCR0_DAC2R
+#define DBCR_DAC2W	DBCR0_DAC2W
+
 /* Bit definitions related to the DBCR1. */
+#define DBCR1_IAC1US	0xC0000000	/* Instr Addr Cmp 1 Sup/User   */
+#define DBCR1_IAC1ER	0x30000000	/* Instr Addr Cmp 1 Eff/Real */
+#define DBCR1_IAC1ER_01	0x10000000	/* reserved */
+#define DBCR1_IAC1ER_10	0x20000000	/* Instr Addr Cmp 1 Eff/Real MSR[IS]=0 */
+#define DBCR1_IAC1ER_11	0x30000000	/* Instr Addr Cmp 1 Eff/Real MSR[IS]=1 */
+#define DBCR1_IAC2US	0x0C000000	/* Instr Addr Cmp 2 Sup/User   */
+#define DBCR1_IAC2ER	0x03000000	/* Instr Addr Cmp 2 Eff/Real */
+#define DBCR1_IAC2ER_01	0x01000000	/* reserved */
+#define DBCR1_IAC2ER_10	0x02000000	/* Instr Addr Cmp 2 Eff/Real MSR[IS]=0 */
+#define DBCR1_IAC2ER_11	0x03000000	/* Instr Addr Cmp 2 Eff/Real MSR[IS]=1 */
 #define DBCR1_IAC12M	0x00800000	/* Instr Addr 1-2 range enable */
 #define DBCR1_IAC12MX	0x00C00000	/* Instr Addr 1-2 range eXclusive */
 #define DBCR1_IAC12AT	0x00010000	/* Instr Addr 1-2 range Toggle */
+#define DBCR1_IAC3US	0x0000C000	/* Instr Addr Cmp 3 Sup/User   */
+#define DBCR1_IAC3ER	0x00003000	/* Instr Addr Cmp 3 Eff/Real */
+#define DBCR1_IAC3ER_01	0x00001000	/* reserved */
+#define DBCR1_IAC3ER_10	0x00002000	/* Instr Addr Cmp 3 Eff/Real MSR[IS]=0 */
+#define DBCR1_IAC3ER_11	0x00003000	/* Instr Addr Cmp 3 Eff/Real MSR[IS]=1 */
+#define DBCR1_IAC4US	0x00000C00	/* Instr Addr Cmp 4 Sup/User   */
+#define DBCR1_IAC4ER	0x00000300	/* Instr Addr Cmp 4 Eff/Real */
+#define DBCR1_IAC4ER_01	0x00000100	/* Instr Addr Cmp 4 Eff/Real MSR[IS]=0 */
+#define DBCR1_IAC4ER_10	0x00000200	/* Instr Addr Cmp 4 Eff/Real MSR[IS]=0 */
+#define DBCR1_IAC4ER_11	0x00000300	/* Instr Addr Cmp 4 Eff/Real MSR[IS]=1 */
 #define DBCR1_IAC34M	0x00000080	/* Instr Addr 3-4 range enable */
 #define DBCR1_IAC34MX	0x000000C0	/* Instr Addr 3-4 range eXclusive */
 #define DBCR1_IAC34AT	0x00000001	/* Instr Addr 3-4 range Toggle */
 
+#define dbcr_iac_range(task)	((task)->thread.dbcr1)
+#define DBCR_IAC12I	DBCR1_IAC12M	/* Range Inclusive */
+#define DBCR_IAC12X	DBCR1_IAC12MX	/* Range Exclusive */
+#define DBCR_IAC12MODE	DBCR1_IAC12MX	/* IAC 1-2 Mode Bits */
+#define DBCR_IAC34I	DBCR1_IAC34M	/* Range Inclusive */
+#define DBCR_IAC34X	DBCR1_IAC34MX	/* Range Exclusive */
+#define DBCR_IAC34MODE	DBCR1_IAC34MX	/* IAC 3-4 Mode Bits */
+
 /* Bit definitions related to the DBCR2. */
+#define DBCR2_DAC1US	0xC0000000	/* Data Addr Cmp 1 Sup/User   */
+#define DBCR2_DAC1ER	0x30000000	/* Data Addr Cmp 1 Eff/Real */
+#define DBCR2_DAC2US	0x00000000	/* Data Addr Cmp 2 Sup/User   */
+#define DBCR2_DAC2ER	0x00000000	/* Data Addr Cmp 2 Eff/Real */
 #define DBCR2_DAC12M	0x00800000	/* DAC 1-2 range enable */
+#define DBCR2_DAC12MM	0x00400000	/* DAC 1-2 Mask mode*/
 #define DBCR2_DAC12MX	0x00C00000	/* DAC 1-2 range eXclusive */
+#define DBCR2_DAC12MODE	0x00C00000	/* DAC 1-2 Mode Bits */
 #define DBCR2_DAC12A	0x00200000	/* DAC 1-2 Asynchronous */
-#endif
+#define DBCR2_DVC1M	0x000C0000	/* Data Value Comp 1 Mode */
+#define DBCR2_DVC1M_SHIFT	18	/* # of bits to shift DBCR2_DVC1M */
+#define DBCR2_DVC2M	0x00030000	/* Data Value Comp 2 Mode */
+#define DBCR2_DVC2M_SHIFT	16	/* # of bits to shift DBCR2_DVC2M */
+#define DBCR2_DVC1BE	0x00000F00	/* Data Value Comp 1 Byte */
+#define DBCR2_DVC1BE_SHIFT	8	/* # of bits to shift DBCR2_DVC1BE */
+#define DBCR2_DVC2BE	0x0000000F	/* Data Value Comp 2 Byte */
+#define DBCR2_DVC2BE_SHIFT	0	/* # of bits to shift DBCR2_DVC2BE */
+
+/*
+ * Are there any active Debug Events represented in the
+ * Debug Control Registers?
+ */
+#define DBCR0_ACTIVE_EVENTS  (DBCR0_ICMP | DBCR0_IAC1 | DBCR0_IAC2 | \
+			      DBCR0_IAC3 | DBCR0_IAC4 | DBCR0_DAC1R | \
+			      DBCR0_DAC1W  | DBCR0_DAC2R | DBCR0_DAC2W)
+#define DBCR1_ACTIVE_EVENTS	0
+
+#define DBCR_ACTIVE_EVENTS(dbcr0, dbcr1)  (((dbcr0) & DBCR0_ACTIVE_EVENTS) || \
+					   ((dbcr1) & DBCR1_ACTIVE_EVENTS))
+#endif /* #elif defined(CONFIG_BOOKE) */
 
 /* Bit definitions related to the TCR. */
 #define TCR_WP(x)	(((x)&0x3)<<30)	/* WDT Period */

arch/powerpc/include/asm/spinlock.h

@@ -27,6 +27,7 @@
 #endif
 #include <asm/asm-compat.h>
 #include <asm/synch.h>
+#include <asm/ppc-opcode.h>
 
 #define arch_spin_is_locked(x)		((x)->slock != 0)
 
@@ -60,13 +61,14 @@ static inline unsigned long __arch_spin_trylock(arch_spinlock_t *lock)
 
 	token = LOCK_TOKEN;
 	__asm__ __volatile__(
-"1:	lwarx		%0,0,%2\n\
+"1:	" PPC_LWARX(%0,0,%2,1) "\n\
 	cmpwi		0,%0,0\n\
 	bne-		2f\n\
 	stwcx.		%1,0,%2\n\
-	bne-		1b\n\
-	isync\n\
-2:"	: "=&r" (tmp)
+	bne-		1b\n"
+	PPC_ACQUIRE_BARRIER
+"2:"
+	: "=&r" (tmp)
 	: "r" (token), "r" (&lock->slock)
 	: "cr0", "memory");
 
@@ -144,7 +146,7 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
 {
 	SYNC_IO;
 	__asm__ __volatile__("# arch_spin_unlock\n\t"
-				LWSYNC_ON_SMP: : :"memory");
+				PPC_RELEASE_BARRIER: : :"memory");
 	lock->slock = 0;
 }
 
@@ -186,15 +188,15 @@ static inline long __arch_read_trylock(arch_rwlock_t *rw)
 	long tmp;
 
 	__asm__ __volatile__(
-"1:	lwarx		%0,0,%1\n"
+"1:	" PPC_LWARX(%0,0,%1,1) "\n"
 	__DO_SIGN_EXTEND
 "	addic.		%0,%0,1\n\
 	ble-		2f\n"
 	PPC405_ERR77(0,%1)
 "	stwcx.		%0,0,%1\n\
-	bne-		1b\n\
-	isync\n\
-2:"	: "=&r" (tmp)
+	bne-		1b\n"
+	PPC_ACQUIRE_BARRIER
+"2:"	: "=&r" (tmp)
 	: "r" (&rw->lock)
 	: "cr0", "xer", "memory");
 
@@ -211,14 +213,14 @@ static inline long __arch_write_trylock(arch_rwlock_t *rw)
 
 	token = WRLOCK_TOKEN;
 	__asm__ __volatile__(
-"1:	lwarx		%0,0,%2\n\
+"1:	" PPC_LWARX(%0,0,%2,1) "\n\
 	cmpwi		0,%0,0\n\
 	bne-		2f\n"
 	PPC405_ERR77(0,%1)
 "	stwcx.		%1,0,%2\n\
-	bne-		1b\n\
-	isync\n\
-2:"	: "=&r" (tmp)
+	bne-		1b\n"
+	PPC_ACQUIRE_BARRIER
+"2:"	: "=&r" (tmp)
 	: "r" (token), "r" (&rw->lock)
 	: "cr0", "memory");
 
@@ -269,7 +271,7 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
 
 	__asm__ __volatile__(
 	"# read_unlock\n\t"
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx		%0,0,%1\n\
 	addic		%0,%0,-1\n"
 	PPC405_ERR77(0,%1)
@@ -283,7 +285,7 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
 static inline void arch_write_unlock(arch_rwlock_t *rw)
 {
 	__asm__ __volatile__("# write_unlock\n\t"
-				LWSYNC_ON_SMP: : :"memory");
+				PPC_RELEASE_BARRIER: : :"memory");
 	rw->lock = 0;
 }
 

arch/powerpc/include/asm/synch.h

@@ -37,11 +37,15 @@ static inline void isync(void)
 #endif
 
 #ifdef CONFIG_SMP
-#define ISYNC_ON_SMP	"\n\tisync\n"
-#define LWSYNC_ON_SMP	stringify_in_c(LWSYNC) "\n"
+#define __PPC_ACQUIRE_BARRIER				\
+	START_LWSYNC_SECTION(97);			\
+	isync;						\
+	MAKE_LWSYNC_SECTION_ENTRY(97, __lwsync_fixup);
+#define PPC_ACQUIRE_BARRIER	"\n" stringify_in_c(__PPC_ACQUIRE_BARRIER)
+#define PPC_RELEASE_BARRIER	stringify_in_c(LWSYNC) "\n"
 #else
-#define ISYNC_ON_SMP
-#define LWSYNC_ON_SMP
+#define PPC_ACQUIRE_BARRIER
+#define PPC_RELEASE_BARRIER
 #endif
 
 #endif /* __KERNEL__ */

arch/powerpc/include/asm/system.h

@@ -112,8 +112,13 @@ static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; }
 #endif
 
 extern int set_dabr(unsigned long dabr);
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+extern void do_send_trap(struct pt_regs *regs, unsigned long address,
+			 unsigned long error_code, int signal_code, int brkpt);
+#else
 extern void do_dabr(struct pt_regs *regs, unsigned long address,
 		    unsigned long error_code);
+#endif
 extern void print_backtrace(unsigned long *);
 extern void show_regs(struct pt_regs * regs);
 extern void flush_instruction_cache(void);
@@ -232,12 +237,12 @@ __xchg_u32(volatile void *p, unsigned long val)
 	unsigned long prev;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%2 \n"
 	PPC405_ERR77(0,%2)
 "	stwcx.	%3,0,%2 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (prev), "+m" (*(volatile unsigned int *)p)
 	: "r" (p), "r" (val)
 	: "cc", "memory");
@@ -275,12 +280,12 @@ __xchg_u64(volatile void *p, unsigned long val)
 	unsigned long prev;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%2 \n"
 	PPC405_ERR77(0,%2)
 "	stdcx.	%3,0,%2 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (prev), "+m" (*(volatile unsigned long *)p)
 	: "r" (p), "r" (val)
 	: "cc", "memory");
@@ -366,14 +371,14 @@ __cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new)
 	unsigned int prev;
 
 	__asm__ __volatile__ (
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%2		# __cmpxchg_u32\n\
 	cmpw	0,%0,%3\n\
 	bne-	2f\n"
 	PPC405_ERR77(0,%2)
 "	stwcx.	%4,0,%2\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	"\n\
 2:"
 	: "=&r" (prev), "+m" (*p)
@@ -412,13 +417,13 @@ __cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new)
 	unsigned long prev;
 
 	__asm__ __volatile__ (
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%2		# __cmpxchg_u64\n\
 	cmpd	0,%0,%3\n\
 	bne-	2f\n\
 	stdcx.	%4,0,%2\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	"\n\
 2:"
 	: "=&r" (prev), "+m" (*p)

arch/powerpc/include/asm/topology.h

@@ -38,27 +38,33 @@ static inline int pcibus_to_node(struct pci_bus *bus)
 				 cpumask_of_node(pcibus_to_node(bus)))
 
 /* sched_domains SD_NODE_INIT for PPC64 machines */
-#define SD_NODE_INIT (struct sched_domain) {		\
-	.parent			= NULL,			\
-	.child			= NULL,			\
-	.groups			= NULL,			\
-	.min_interval		= 8,			\
-	.max_interval		= 32,			\
-	.busy_factor		= 32,			\
-	.imbalance_pct		= 125,			\
-	.cache_nice_tries	= 1,			\
-	.busy_idx		= 3,			\
-	.idle_idx		= 1,			\
-	.newidle_idx		= 0,			\
-	.wake_idx		= 0,			\
-	.flags			= SD_LOAD_BALANCE	\
-				| SD_BALANCE_EXEC	\
-				| SD_BALANCE_FORK	\
-				| SD_BALANCE_NEWIDLE	\
-				| SD_SERIALIZE,		\
-	.last_balance		= jiffies,		\
-	.balance_interval	= 1,			\
-	.nr_balance_failed	= 0,			\
+#define SD_NODE_INIT (struct sched_domain) {				\
+	.min_interval		= 8,					\
+	.max_interval		= 32,					\
+	.busy_factor		= 32,					\
+	.imbalance_pct		= 125,					\
+	.cache_nice_tries	= 1,					\
+	.busy_idx		= 3,					\
+	.idle_idx		= 1,					\
+	.newidle_idx		= 0,					\
+	.wake_idx		= 0,					\
+	.forkexec_idx		= 0,					\
+									\
+	.flags			= 1*SD_LOAD_BALANCE			\
+				| 1*SD_BALANCE_NEWIDLE			\
+				| 1*SD_BALANCE_EXEC			\
+				| 1*SD_BALANCE_FORK			\
+				| 0*SD_BALANCE_WAKE			\
+				| 0*SD_WAKE_AFFINE			\
+				| 0*SD_PREFER_LOCAL			\
+				| 0*SD_SHARE_CPUPOWER			\
+				| 0*SD_POWERSAVINGS_BALANCE		\
+				| 0*SD_SHARE_PKG_RESOURCES		\
+				| 1*SD_SERIALIZE			\
+				| 0*SD_PREFER_SIBLING			\
+				,					\
+	.last_balance		= jiffies,				\
+	.balance_interval	= 1,					\
 }
 
 extern void __init dump_numa_cpu_topology(void);

arch/powerpc/kernel/entry_64.S

@@ -791,9 +791,8 @@ _GLOBAL(enter_rtas)
 	
         li      r9,1
         rldicr  r9,r9,MSR_SF_LG,(63-MSR_SF_LG)
-	ori	r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP
+	ori	r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP|MSR_RI
 	andc	r6,r0,r9
-	ori	r6,r6,MSR_RI
 	sync				/* disable interrupts so SRR0/1 */
 	mtmsrd	r0			/* don't get trashed */
 

arch/powerpc/kernel/firmware.c

@@ -17,5 +17,5 @@
 
 #include <asm/firmware.h>
 
-unsigned long powerpc_firmware_features;
+unsigned long powerpc_firmware_features __read_mostly;
 EXPORT_SYMBOL_GPL(powerpc_firmware_features);

arch/powerpc/kernel/head_fsl_booke.S

@@ -214,11 +214,11 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	bl	1f		/* Find our address */
 1:	mflr	r9
 	rlwimi	r7,r9,0,20,31
-	addi	r7,r7,24
+	addi	r7,r7,(2f - 1b)
 	mtspr	SPRN_SRR0,r7
 	mtspr	SPRN_SRR1,r6
 	rfi
-
+2:
 /* 4. Clear out PIDs & Search info */
 	li	r6,0
 	mtspr   SPRN_MAS6,r6

arch/powerpc/kernel/irq.c

@@ -73,8 +73,10 @@
 #define CREATE_TRACE_POINTS
 #include <asm/trace.h>
 
+DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
+EXPORT_PER_CPU_SYMBOL(irq_stat);
+
 int __irq_offset_value;
-static int ppc_spurious_interrupts;
 
 #ifdef CONFIG_PPC32
 EXPORT_SYMBOL(__irq_offset_value);
@@ -180,30 +182,64 @@ notrace void raw_local_irq_restore(unsigned long en)
 EXPORT_SYMBOL(raw_local_irq_restore);
 #endif /* CONFIG_PPC64 */
 
+static int show_other_interrupts(struct seq_file *p, int prec)
+{
+	int j;
+
+#if defined(CONFIG_PPC32) && defined(CONFIG_TAU_INT)
+	if (tau_initialized) {
+		seq_printf(p, "%*s: ", prec, "TAU");
+		for_each_online_cpu(j)
+			seq_printf(p, "%10u ", tau_interrupts(j));
+		seq_puts(p, "  PowerPC             Thermal Assist (cpu temp)\n");
+	}
+#endif /* CONFIG_PPC32 && CONFIG_TAU_INT */
+
+	seq_printf(p, "%*s: ", prec, "LOC");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", per_cpu(irq_stat, j).timer_irqs);
+        seq_printf(p, "  Local timer interrupts\n");
+
+	seq_printf(p, "%*s: ", prec, "SPU");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", per_cpu(irq_stat, j).spurious_irqs);
+	seq_printf(p, "  Spurious interrupts\n");
+
+	seq_printf(p, "%*s: ", prec, "CNT");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", per_cpu(irq_stat, j).pmu_irqs);
+	seq_printf(p, "  Performance monitoring interrupts\n");
+
+	seq_printf(p, "%*s: ", prec, "MCE");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", per_cpu(irq_stat, j).mce_exceptions);
+	seq_printf(p, "  Machine check exceptions\n");
+
+	return 0;
+}
+
 int show_interrupts(struct seq_file *p, void *v)
 {
-	int i = *(loff_t *)v, j;
+	unsigned long flags, any_count = 0;
+	int i = *(loff_t *) v, j, prec;
 	struct irqaction *action;
 	struct irq_desc *desc;
-	unsigned long flags;
 
+	if (i > nr_irqs)
+		return 0;
+
+	for (prec = 3, j = 1000; prec < 10 && j <= nr_irqs; ++prec)
+		j *= 10;
+
+	if (i == nr_irqs)
+		return show_other_interrupts(p, prec);
+
+	/* print header */
 	if (i == 0) {
-		seq_puts(p, "           ");
+		seq_printf(p, "%*s", prec + 8, "");
 		for_each_online_cpu(j)
-			seq_printf(p, "CPU%d       ", j);
+			seq_printf(p, "CPU%-8d", j);
 		seq_putc(p, '\n');
-	} else if (i == nr_irqs) {
-#if defined(CONFIG_PPC32) && defined(CONFIG_TAU_INT)
-		if (tau_initialized){
-			seq_puts(p, "TAU: ");
-			for_each_online_cpu(j)
-				seq_printf(p, "%10u ", tau_interrupts(j));
-			seq_puts(p, "  PowerPC             Thermal Assist (cpu temp)\n");
-		}
-#endif /* CONFIG_PPC32 && CONFIG_TAU_INT*/
-		seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts);
-
-		return 0;
 	}
 
 	desc = irq_to_desc(i);
@@ -211,37 +247,48 @@ int show_interrupts(struct seq_file *p, void *v)
 		return 0;
 
 	raw_spin_lock_irqsave(&desc->lock, flags);
-
+	for_each_online_cpu(j)
+		any_count |= kstat_irqs_cpu(i, j);
 	action = desc->action;
-	if (!action || !action->handler)
-		goto skip;
+	if (!action && !any_count)
+		goto out;
 
-	seq_printf(p, "%3d: ", i);
-#ifdef CONFIG_SMP
+	seq_printf(p, "%*d: ", prec, i);
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
-#else
-	seq_printf(p, "%10u ", kstat_irqs(i));
-#endif /* CONFIG_SMP */
 
 	if (desc->chip)
-		seq_printf(p, " %s ", desc->chip->name);
+		seq_printf(p, "  %-16s", desc->chip->name);
 	else
-		seq_puts(p, "  None      ");
+		seq_printf(p, "  %-16s", "None");
+	seq_printf(p, " %-8s", (desc->status & IRQ_LEVEL) ? "Level" : "Edge");
 
-	seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge  ");
-	seq_printf(p, "    %s", action->name);
+	if (action) {
+		seq_printf(p, "     %s", action->name);
+		while ((action = action->next) != NULL)
+			seq_printf(p, ", %s", action->name);
+	}
 
-	for (action = action->next; action; action = action->next)
-		seq_printf(p, ", %s", action->name);
 	seq_putc(p, '\n');
-
-skip:
+out:
 	raw_spin_unlock_irqrestore(&desc->lock, flags);
-
 	return 0;
 }
 
+/*
+ * /proc/stat helpers
+ */
+u64 arch_irq_stat_cpu(unsigned int cpu)
+{
+	u64 sum = per_cpu(irq_stat, cpu).timer_irqs;
+
+	sum += per_cpu(irq_stat, cpu).pmu_irqs;
+	sum += per_cpu(irq_stat, cpu).mce_exceptions;
+	sum += per_cpu(irq_stat, cpu).spurious_irqs;
+
+	return sum;
+}
+
 #ifdef CONFIG_HOTPLUG_CPU
 void fixup_irqs(cpumask_t map)
 {
@@ -353,8 +400,7 @@ void do_IRQ(struct pt_regs *regs)
 	if (irq != NO_IRQ && irq != NO_IRQ_IGNORE)
 		handle_one_irq(irq);
 	else if (irq != NO_IRQ_IGNORE)
-		/* That's not SMP safe ... but who cares ? */
-		ppc_spurious_interrupts++;
+		__get_cpu_var(irq_stat).spurious_irqs++;
 
 	irq_exit();
 	set_irq_regs(old_regs);
@@ -474,7 +520,7 @@ void do_softirq(void)
  */
 
 static LIST_HEAD(irq_hosts);
-static DEFINE_SPINLOCK(irq_big_lock);
+static DEFINE_RAW_SPINLOCK(irq_big_lock);
 static unsigned int revmap_trees_allocated;
 static DEFINE_MUTEX(revmap_trees_mutex);
 struct irq_map_entry irq_map[NR_IRQS];
@@ -520,14 +566,14 @@ struct irq_host *irq_alloc_host(struct device_node *of_node,
 	if (host->ops->match == NULL)
 		host->ops->match = default_irq_host_match;
 
-	spin_lock_irqsave(&irq_big_lock, flags);
+	raw_spin_lock_irqsave(&irq_big_lock, flags);
 
 	/* If it's a legacy controller, check for duplicates and
 	 * mark it as allocated (we use irq 0 host pointer for that
 	 */
 	if (revmap_type == IRQ_HOST_MAP_LEGACY) {
 		if (irq_map[0].host != NULL) {
-			spin_unlock_irqrestore(&irq_big_lock, flags);
+			raw_spin_unlock_irqrestore(&irq_big_lock, flags);
 			/* If we are early boot, we can't free the structure,
 			 * too bad...
 			 * this will be fixed once slab is made available early
@@ -541,7 +587,7 @@ struct irq_host *irq_alloc_host(struct device_node *of_node,
 	}
 
 	list_add(&host->link, &irq_hosts);
-	spin_unlock_irqrestore(&irq_big_lock, flags);
+	raw_spin_unlock_irqrestore(&irq_big_lock, flags);
 
 	/* Additional setups per revmap type */
 	switch(revmap_type) {
@@ -592,13 +638,13 @@ struct irq_host *irq_find_host(struct device_node *node)
 	 * the absence of a device node. This isn't a problem so far
 	 * yet though...
 	 */
-	spin_lock_irqsave(&irq_big_lock, flags);
+	raw_spin_lock_irqsave(&irq_big_lock, flags);
 	list_for_each_entry(h, &irq_hosts, link)
 		if (h->ops->match(h, node)) {
 			found = h;
 			break;
 		}
-	spin_unlock_irqrestore(&irq_big_lock, flags);
+	raw_spin_unlock_irqrestore(&irq_big_lock, flags);
 	return found;
 }
 EXPORT_SYMBOL_GPL(irq_find_host);
@@ -967,7 +1013,7 @@ unsigned int irq_alloc_virt(struct irq_host *host,
 	if (count == 0 || count > (irq_virq_count - NUM_ISA_INTERRUPTS))
 		return NO_IRQ;
 
-	spin_lock_irqsave(&irq_big_lock, flags);
+	raw_spin_lock_irqsave(&irq_big_lock, flags);
 
 	/* Use hint for 1 interrupt if any */
 	if (count == 1 && hint >= NUM_ISA_INTERRUPTS &&
@@ -991,7 +1037,7 @@ unsigned int irq_alloc_virt(struct irq_host *host,
 		}
 	}
 	if (found == NO_IRQ) {
-		spin_unlock_irqrestore(&irq_big_lock, flags);
+		raw_spin_unlock_irqrestore(&irq_big_lock, flags);
 		return NO_IRQ;
 	}
  hint_found:
@@ -1000,7 +1046,7 @@ unsigned int irq_alloc_virt(struct irq_host *host,
 		smp_wmb();
 		irq_map[i].host = host;
 	}
-	spin_unlock_irqrestore(&irq_big_lock, flags);
+	raw_spin_unlock_irqrestore(&irq_big_lock, flags);
 	return found;
 }
 
@@ -1012,7 +1058,7 @@ void irq_free_virt(unsigned int virq, unsigned int count)
 	WARN_ON (virq < NUM_ISA_INTERRUPTS);
 	WARN_ON (count == 0 || (virq + count) > irq_virq_count);
 
-	spin_lock_irqsave(&irq_big_lock, flags);
+	raw_spin_lock_irqsave(&irq_big_lock, flags);
 	for (i = virq; i < (virq + count); i++) {
 		struct irq_host *host;
 
@@ -1025,7 +1071,7 @@ void irq_free_virt(unsigned int virq, unsigned int count)
 		smp_wmb();
 		irq_map[i].host = NULL;
 	}
-	spin_unlock_irqrestore(&irq_big_lock, flags);
+	raw_spin_unlock_irqrestore(&irq_big_lock, flags);
 }
 
 int arch_early_irq_init(void)

arch/powerpc/kernel/kgdb.c

@@ -333,7 +333,7 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code,
 		atomic_set(&kgdb_cpu_doing_single_step, -1);
 		/* set the trace bit if we're stepping */
 		if (remcom_in_buffer[0] == 's') {
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 			mtspr(SPRN_DBCR0,
 			      mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
 			linux_regs->msr |= MSR_DE;

arch/powerpc/kernel/kprobes.c

@@ -36,7 +36,7 @@
 #include <asm/uaccess.h>
 #include <asm/system.h>
 
-#ifdef CONFIG_BOOKE
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 #define MSR_SINGLESTEP	(MSR_DE)
 #else
 #define MSR_SINGLESTEP	(MSR_SE)
@@ -110,7 +110,7 @@ static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 	 * like Decrementer or External Interrupt */
 	regs->msr &= ~MSR_EE;
 	regs->msr |= MSR_SINGLESTEP;
-#ifdef CONFIG_BOOKE
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 	regs->msr &= ~MSR_CE;
 	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
 #endif

arch/powerpc/kernel/lparcfg.c

@@ -359,7 +359,7 @@ static void parse_system_parameter_string(struct seq_file *m)
 
 	unsigned char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
 	if (!local_buffer) {
-		printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
+		printk(KERN_ERR "%s %s kmalloc failure at line %d\n",
 		       __FILE__, __func__, __LINE__);
 		return;
 	}
@@ -383,13 +383,13 @@ static void parse_system_parameter_string(struct seq_file *m)
 		int idx, w_idx;
 		char *workbuffer = kzalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
 		if (!workbuffer) {
-			printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
+			printk(KERN_ERR "%s %s kmalloc failure at line %d\n",
 			       __FILE__, __func__, __LINE__);
 			kfree(local_buffer);
 			return;
 		}
 #ifdef LPARCFG_DEBUG
-		printk(KERN_INFO "success calling get-system-parameter \n");
+		printk(KERN_INFO "success calling get-system-parameter\n");
 #endif
 		splpar_strlen = local_buffer[0] * 256 + local_buffer[1];
 		local_buffer += 2;	/* step over strlen value */
@@ -440,7 +440,7 @@ static int lparcfg_count_active_processors(void)
 
 	while ((cpus_dn = of_find_node_by_type(cpus_dn, "cpu"))) {
 #ifdef LPARCFG_DEBUG
-		printk(KERN_ERR "cpus_dn %p \n", cpus_dn);
+		printk(KERN_ERR "cpus_dn %p\n", cpus_dn);
 #endif
 		count++;
 	}
@@ -725,7 +725,7 @@ static int lparcfg_data(struct seq_file *m, void *v)
 	const unsigned int *lp_index_ptr;
 	unsigned int lp_index = 0;
 
-	seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS);
+	seq_printf(m, "%s %s\n", MODULE_NAME, MODULE_VERS);
 
 	rootdn = of_find_node_by_path("/");
 	if (rootdn) {

arch/powerpc/kernel/nvram_64.c

@@ -338,8 +338,8 @@ static int __init nvram_create_os_partition(void)
 
 	rc = nvram_write_header(new_part);
 	if (rc <= 0) {
-		printk(KERN_ERR "nvram_create_os_partition: nvram_write_header \
-				failed (%d)\n", rc);
+		printk(KERN_ERR "nvram_create_os_partition: nvram_write_header "
+				"failed (%d)\n", rc);
 		return rc;
 	}
 
@@ -349,7 +349,7 @@ static int __init nvram_create_os_partition(void)
 	rc = ppc_md.nvram_write((char *)&seq_init, sizeof(seq_init), &tmp_index);
 	if (rc <= 0) {
 		printk(KERN_ERR "nvram_create_os_partition: nvram_write "
-				"failed (%d)\n", rc);
+		       "failed (%d)\n", rc);
 		return rc;
 	}
 	

arch/powerpc/kernel/pci_of_scan.c

@@ -304,7 +304,7 @@ static void __devinit __of_scan_bus(struct device_node *node,
 	int reglen, devfn;
 	struct pci_dev *dev;
 
-	pr_debug("of_scan_bus(%s) bus no %d... \n",
+	pr_debug("of_scan_bus(%s) bus no %d...\n",
 		 node->full_name, bus->number);
 
 	/* Scan direct children */

arch/powerpc/kernel/pmc.c

@@ -37,7 +37,7 @@ static void dummy_perf(struct pt_regs *regs)
 }
 
 
-static DEFINE_SPINLOCK(pmc_owner_lock);
+static DEFINE_RAW_SPINLOCK(pmc_owner_lock);
 static void *pmc_owner_caller; /* mostly for debugging */
 perf_irq_t perf_irq = dummy_perf;
 
@@ -45,7 +45,7 @@ int reserve_pmc_hardware(perf_irq_t new_perf_irq)
 {
 	int err = 0;
 
-	spin_lock(&pmc_owner_lock);
+	raw_spin_lock(&pmc_owner_lock);
 
 	if (pmc_owner_caller) {
 		printk(KERN_WARNING "reserve_pmc_hardware: "
@@ -59,21 +59,21 @@ int reserve_pmc_hardware(perf_irq_t new_perf_irq)
 	perf_irq = new_perf_irq ? new_perf_irq : dummy_perf;
 
  out:
-	spin_unlock(&pmc_owner_lock);
+	raw_spin_unlock(&pmc_owner_lock);
 	return err;
 }
 EXPORT_SYMBOL_GPL(reserve_pmc_hardware);
 
 void release_pmc_hardware(void)
 {
-	spin_lock(&pmc_owner_lock);
+	raw_spin_lock(&pmc_owner_lock);
 
 	WARN_ON(! pmc_owner_caller);
 
 	pmc_owner_caller = NULL;
 	perf_irq = dummy_perf;
 
-	spin_unlock(&pmc_owner_lock);
+	raw_spin_unlock(&pmc_owner_lock);
 }
 EXPORT_SYMBOL_GPL(release_pmc_hardware);
 

arch/powerpc/kernel/process.c

@@ -245,6 +245,24 @@ void discard_lazy_cpu_state(void)
 }
 #endif /* CONFIG_SMP */
 
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+void do_send_trap(struct pt_regs *regs, unsigned long address,
+		  unsigned long error_code, int signal_code, int breakpt)
+{
+	siginfo_t info;
+
+	if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code,
+			11, SIGSEGV) == NOTIFY_STOP)
+		return;
+
+	/* Deliver the signal to userspace */
+	info.si_signo = SIGTRAP;
+	info.si_errno = breakpt;	/* breakpoint or watchpoint id */
+	info.si_code = signal_code;
+	info.si_addr = (void __user *)address;
+	force_sig_info(SIGTRAP, &info, current);
+}
+#else	/* !CONFIG_PPC_ADV_DEBUG_REGS */
 void do_dabr(struct pt_regs *regs, unsigned long address,
 		    unsigned long error_code)
 {
@@ -257,12 +275,6 @@ void do_dabr(struct pt_regs *regs, unsigned long address,
 	if (debugger_dabr_match(regs))
 		return;
 
-	/* Clear the DAC and struct entries.  One shot trigger */
-#if defined(CONFIG_BOOKE)
-	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | DBSR_DAC1W
-							| DBCR0_IDM));
-#endif
-
 	/* Clear the DABR */
 	set_dabr(0);
 
@@ -273,9 +285,82 @@ void do_dabr(struct pt_regs *regs, unsigned long address,
 	info.si_addr = (void __user *)address;
 	force_sig_info(SIGTRAP, &info, current);
 }
+#endif	/* CONFIG_PPC_ADV_DEBUG_REGS */
 
 static DEFINE_PER_CPU(unsigned long, current_dabr);
 
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+/*
+ * Set the debug registers back to their default "safe" values.
+ */
+static void set_debug_reg_defaults(struct thread_struct *thread)
+{
+	thread->iac1 = thread->iac2 = 0;
+#if CONFIG_PPC_ADV_DEBUG_IACS > 2
+	thread->iac3 = thread->iac4 = 0;
+#endif
+	thread->dac1 = thread->dac2 = 0;
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+	thread->dvc1 = thread->dvc2 = 0;
+#endif
+	thread->dbcr0 = 0;
+#ifdef CONFIG_BOOKE
+	/*
+	 * Force User/Supervisor bits to b11 (user-only MSR[PR]=1)
+	 */
+	thread->dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US |	\
+			DBCR1_IAC3US | DBCR1_IAC4US;
+	/*
+	 * Force Data Address Compare User/Supervisor bits to be User-only
+	 * (0b11 MSR[PR]=1) and set all other bits in DBCR2 register to be 0.
+	 */
+	thread->dbcr2 = DBCR2_DAC1US | DBCR2_DAC2US;
+#else
+	thread->dbcr1 = 0;
+#endif
+}
+
+static void prime_debug_regs(struct thread_struct *thread)
+{
+	mtspr(SPRN_IAC1, thread->iac1);
+	mtspr(SPRN_IAC2, thread->iac2);
+#if CONFIG_PPC_ADV_DEBUG_IACS > 2
+	mtspr(SPRN_IAC3, thread->iac3);
+	mtspr(SPRN_IAC4, thread->iac4);
+#endif
+	mtspr(SPRN_DAC1, thread->dac1);
+	mtspr(SPRN_DAC2, thread->dac2);
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+	mtspr(SPRN_DVC1, thread->dvc1);
+	mtspr(SPRN_DVC2, thread->dvc2);
+#endif
+	mtspr(SPRN_DBCR0, thread->dbcr0);
+	mtspr(SPRN_DBCR1, thread->dbcr1);
+#ifdef CONFIG_BOOKE
+	mtspr(SPRN_DBCR2, thread->dbcr2);
+#endif
+}
+/*
+ * Unless neither the old or new thread are making use of the
+ * debug registers, set the debug registers from the values
+ * stored in the new thread.
+ */
+static void switch_booke_debug_regs(struct thread_struct *new_thread)
+{
+	if ((current->thread.dbcr0 & DBCR0_IDM)
+		|| (new_thread->dbcr0 & DBCR0_IDM))
+			prime_debug_regs(new_thread);
+}
+#else	/* !CONFIG_PPC_ADV_DEBUG_REGS */
+static void set_debug_reg_defaults(struct thread_struct *thread)
+{
+	if (thread->dabr) {
+		thread->dabr = 0;
+		set_dabr(0);
+	}
+}
+#endif	/* CONFIG_PPC_ADV_DEBUG_REGS */
+
 int set_dabr(unsigned long dabr)
 {
 	__get_cpu_var(current_dabr) = dabr;
@@ -284,7 +369,7 @@ int set_dabr(unsigned long dabr)
 		return ppc_md.set_dabr(dabr);
 
 	/* XXX should we have a CPU_FTR_HAS_DABR ? */
-#if defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 	mtspr(SPRN_DAC1, dabr);
 #elif defined(CONFIG_PPC_BOOK3S)
 	mtspr(SPRN_DABR, dabr);
@@ -371,10 +456,8 @@ struct task_struct *__switch_to(struct task_struct *prev,
 
 #endif /* CONFIG_SMP */
 
-#if defined(CONFIG_BOOKE)
-	/* If new thread DAC (HW breakpoint) is the same then leave it */
-	if (new->thread.dabr)
-		set_dabr(new->thread.dabr);
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+	switch_booke_debug_regs(&new->thread);
 #else
 	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
 		set_dabr(new->thread.dabr);
@@ -514,7 +597,7 @@ void show_regs(struct pt_regs * regs)
 	printk("  CR: %08lx  XER: %08lx\n", regs->ccr, regs->xer);
 	trap = TRAP(regs);
 	if (trap == 0x300 || trap == 0x600)
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 		printk("DEAR: "REG", ESR: "REG"\n", regs->dar, regs->dsisr);
 #else
 		printk("DAR: "REG", DSISR: "REG"\n", regs->dar, regs->dsisr);
@@ -556,14 +639,7 @@ void flush_thread(void)
 {
 	discard_lazy_cpu_state();
 
-	if (current->thread.dabr) {
-		current->thread.dabr = 0;
-		set_dabr(0);
-
-#if defined(CONFIG_BOOKE)
-		current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W);
-#endif
-	}
+	set_debug_reg_defaults(&current->thread);
 }
 
 void

arch/powerpc/kernel/signal.c

@@ -140,17 +140,15 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
 		return 0;               /* no signals delivered */
 	}
 
+#ifndef CONFIG_PPC_ADV_DEBUG_REGS
         /*
 	 * Reenable the DABR before delivering the signal to
 	 * user space. The DABR will have been cleared if it
 	 * triggered inside the kernel.
 	 */
-	if (current->thread.dabr) {
+	if (current->thread.dabr)
 		set_dabr(current->thread.dabr);
-#if defined(CONFIG_BOOKE)
-		mtspr(SPRN_DBCR0, current->thread.dbcr0);
 #endif
-	}
 
 	if (is32) {
         	if (ka.sa.sa_flags & SA_SIGINFO)

arch/powerpc/lib/feature-fixups.c

@@ -112,7 +112,8 @@ void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end)
 
 void do_lwsync_fixups(unsigned long value, void *fixup_start, void *fixup_end)
 {
-	unsigned int *start, *end, *dest;
+	long *start, *end;
+	unsigned int *dest;
 
 	if (!(value & CPU_FTR_LWSYNC))
 		return ;

arch/powerpc/mm/40x_mmu.c

@@ -84,8 +84,8 @@ void __init MMU_init_hw(void)
 	 * vectors and the kernel live in real-mode.
 	 */
 
-        mtspr(SPRN_DCCR, 0xF0000000);	/* 512 MB of data space at 0x0. */
-        mtspr(SPRN_ICCR, 0xF0000000);	/* 512 MB of instr. space at 0x0. */
+        mtspr(SPRN_DCCR, 0xFFFF0000);	/* 2GByte of data space at 0x0. */
+        mtspr(SPRN_ICCR, 0xFFFF0000);	/* 2GByte of instr. space at 0x0. */
 }
 
 #define LARGE_PAGE_SIZE_16M	(1<<24)