Commit f0a53105 authored by Antti Palosaari's avatar Antti Palosaari Committed by Mauro Carvalho Chehab

[media] anysee: add support for Anysee E30 S2 Plus

It is USB DVB-S/S2 box.

Conexant cx24116/cx24118 demod tuner combo
Intersil ISL6423 LNB controller
Signed-off-by: default avatarAntti Palosaari <crope@iki.fi>
Cc: info@anysee.com
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 107d7b18
......@@ -293,6 +293,8 @@ config DVB_USB_ANYSEE
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
select DVB_TDA10023 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_TDA18212 if !MEDIA_TUNER_CUSTOMISE
select DVB_CX24116 if !DVB_FE_CUSTOMISE
select DVB_ISL6423 if !DVB_FE_CUSTOMISE
help
Say Y here to support the Anysee E30, Anysee E30 Plus or
Anysee E30 C Plus DVB USB2.0 receiver.
......
......@@ -37,6 +37,8 @@
#include "mt352_priv.h"
#include "zl10353.h"
#include "tda18212.h"
#include "cx24116.h"
#include "isl6423.h"
/* debug */
static int dvb_usb_anysee_debug;
......@@ -300,6 +302,19 @@ static struct tda18212_config anysee_tda18212_config = {
.if_dvbc = 5000,
};
static struct cx24116_config anysee_cx24116_config = {
.demod_address = (0xaa >> 1),
.mpg_clk_pos_pol = 0x00,
.i2c_wr_max = 48,
};
static struct isl6423_config anysee_isl6423_config = {
.current_max = SEC_CURRENT_800m,
.curlim = SEC_CURRENT_LIM_OFF,
.mod_extern = 1,
.addr = (0x10 >> 1),
};
/*
* New USB device strings: Mfr=1, Product=2, SerialNumber=0
* Manufacturer: AMT.CO.KR
......@@ -328,6 +343,13 @@ static struct tda18212_config anysee_tda18212_config = {
* IOA=4f IOB=ff IOC=00 IOD=26 IOF=01
* IOD[0] TDA10023 1=enabled
*
* E30 S2 Plus VID=04b4 PID=861f HW=11 FW=0.1 "anysee-S2(LP)"
* PCB: 507SI (rev2.1)
* parts: BS2N10WCC01(CX24116, CX24118), ISL6423, TDA8024
* OEA=80 OEB=00 OEC=ff OED=ff OEF=fe
* IOA=4d IOB=ff IOC=00 IOD=26 IOF=01
* IOD[0] CX24116 1=enabled
*
* E30 C Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
* PCB: 507FA (rev0.4)
* parts: TDA10023, DTOS403IH102B TM, TDA8024
......@@ -448,6 +470,19 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
adap->fe = dvb_attach(tda10023_attach, &anysee_tda10023_config,
&adap->dev->i2c_adap, 0x48);
break;
case ANYSEE_HW_507SI: /* 11 */
/* E30 S2 Plus */
/* enable DVB-S/S2 demod on IOD[0] */
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
if (ret)
goto error;
/* attach demod */
adap->fe = dvb_attach(cx24116_attach, &anysee_cx24116_config,
&adap->dev->i2c_adap);
break;
case ANYSEE_HW_507FA: /* 15 */
/* E30 Combo Plus */
......@@ -624,6 +659,14 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
fe = dvb_attach(dvb_pll_attach, adap->fe, (0xc0 >> 1),
&adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A);
break;
case ANYSEE_HW_507SI: /* 11 */
/* E30 S2 Plus */
/* attach LNB controller */
fe = dvb_attach(isl6423_attach, adap->fe, &adap->dev->i2c_adap,
&anysee_isl6423_config);
break;
case ANYSEE_HW_507FA: /* 15 */
/* E30 Combo Plus */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment