Commit f0ab786f authored by oscardagrach's avatar oscardagrach Committed by Wei Xu

arm64: dts: hikey960: Clean up MMC properties and move to proper file

Certain properties should be moved to the board file to reflect
the specific properties of the board, and not the SoC. Move these
properties to proper location and organize properties in both files.
Signed-off-by: default avatarRyan Grachek <ryan@edited.us>
Signed-off-by: default avatarWei Xu <xuwei5@hisilicon.com>
parent 52ac6f2a
......@@ -574,20 +574,36 @@ &spi3 {
};
&dwmmc1 {
bus-width = <0x4>;
cap-sd-highspeed;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
disable-wp;
cd-inverted;
cd-gpios = <&gpio25 3 0>;
pinctrl-names = "default";
pinctrl-0 = <&sd_pmx_func
&sd_clk_cfg_func
&sd_cfg_func>;
vmmc-supply = <&ldo16>;
vqmmc-supply = <&ldo9>;
status = "okay";
};
&dwmmc2 { /* WIFI */
broken-cd;
/* WL_EN */
vmmc-supply = <&wlan_en>;
bus-width = <0x4>;
non-removable;
broken-cd;
cap-power-off-card;
keep-power-in-suspend;
#address-cells = <0x1>;
#size-cells = <0x0>;
pinctrl-names = "default";
pinctrl-0 = <&sdio_pmx_func
&sdio_clk_cfg_func
&sdio_cfg_func>;
/* WL_EN */
vmmc-supply = <&wlan_en>;
status = "ok";
wlcore: wlcore@2 {
......
......@@ -1002,15 +1002,10 @@ &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
/* SD */
dwmmc1: dwmmc1@ff37f000 {
#address-cells = <1>;
#size-cells = <0>;
cd-inverted;
compatible = "hisilicon,hi3660-dw-mshc";
bus-width = <0x4>;
disable-wp;
cap-sd-highspeed;
card-detect-delay = <200>;
reg = <0x0 0xff37f000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3660_CLK_GATE_SD>,
<&crg_ctrl HI3660_HCLK_GATE_SD>;
......@@ -1018,16 +1013,8 @@ dwmmc1: dwmmc1@ff37f000 {
clock-frequency = <3200000>;
resets = <&crg_rst 0x94 18>;
reset-names = "reset";
cd-gpios = <&gpio25 3 0>;
hisilicon,peripheral-syscon = <&sctrl>;
pinctrl-names = "default";
pinctrl-0 = <&sd_pmx_func
&sd_clk_cfg_func
&sd_cfg_func>;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
card-detect-delay = <200>;
status = "disabled";
};
......@@ -1035,6 +1022,8 @@ &sd_clk_cfg_func
dwmmc2: dwmmc2@ff3ff000 {
compatible = "hisilicon,hi3660-dw-mshc";
reg = <0x0 0xff3ff000 0x0 0x1000>;
#address-cells = <0x1>;
#size-cells = <0x0>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3660_CLK_GATE_SDIO0>,
<&crg_ctrl HI3660_HCLK_GATE_SDIO0>;
......@@ -1042,11 +1031,6 @@ dwmmc2: dwmmc2@ff3ff000 {
resets = <&crg_rst 0x94 20>;
reset-names = "reset";
card-detect-delay = <200>;
keep-power-in-suspend;
pinctrl-names = "default";
pinctrl-0 = <&sdio_pmx_func
&sdio_clk_cfg_func
&sdio_cfg_func>;
status = "disabled";
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment