net: dsa: fix warning same module names

When building with CONFIG_NET_DSA_REALTEK_SMI and CONFIG_REALTEK_PHY
enabled as loadable modules, we see the following warning:

warning: same module names found:
  drivers/net/phy/realtek.ko
  drivers/net/dsa/realtek.ko

Rework so the driver name is realtek-smi instead of realtek.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/Makefile

@@ -9,8 +9,8 @@ obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o
 obj-$(CONFIG_NET_DSA_MT7530)	+= mt7530.o
 obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
 obj-$(CONFIG_NET_DSA_QCA8K)	+= qca8k.o
-obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek.o
-realtek-objs			:= realtek-smi.o rtl8366.o rtl8366rb.o
+obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek-smi.o
+realtek-smi-objs		:= realtek-smi-core.o rtl8366.o rtl8366rb.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o

drivers/net/dsa/realtek-smi.c → drivers/net/dsa/realtek-smi-core.c

@@ -40,7 +40,7 @@
 #include <linux/bitops.h>
 #include <linux/if_bridge.h>
 
-#include "realtek-smi.h"
+#include "realtek-smi-core.h"
 
 #define REALTEK_SMI_ACK_RETRY_COUNT		5
 #define REALTEK_SMI_HW_STOP_DELAY		25	/* msecs */

drivers/net/dsa/rtl8366.c

@@ -11,7 +11,7 @@
 #include <linux/if_bridge.h>
 #include <net/dsa.h>
 
-#include "realtek-smi.h"
+#include "realtek-smi-core.h"
 
 int rtl8366_mc_is_used(struct realtek_smi *smi, int mc_index, int *used)
 {

drivers/net/dsa/rtl8366rb.c

@@ -20,7 +20,7 @@
 #include <linux/of_irq.h>
 #include <linux/regmap.h>
 
-#include "realtek-smi.h"
+#include "realtek-smi-core.h"
 
 #define RTL8366RB_PORT_NUM_CPU		5
 #define RTL8366RB_NUM_PORTS		6