Commit f0e07d76 authored by Malcolm Priestley's avatar Malcolm Priestley Committed by Mauro Carvalho Chehab

[media] it913x changed firmware loader for chip version 2 types

On Thu, 2011-12-15 at 16:42 +0000, Malcolm Priestley wrote:
> > [ 1103.536156] it913x: Chip Version=ec Chip Type=5830
> > [ 1104.336178] it913x: Dual mode=92 Remote=92 Tuner Type=92
> > [ 1106.248116] dvb-usb: found a 'ITE 9135(9006) Generic' in cold state,
> > will try to load a firmware
> > [ 1106.253773] dvb-usb: downloading firmware from file
> > 'dvb-usb-it9135-02.fw'
> > [ 1106.452123] it913x: FRM Starting Firmware Download
> > [ 1130.756039] it913x: FRM Firmware Download Failed (ffffff92)
> > [ 1130.956168] it913x: Chip Version=79 Chip Type=5823
> > [ 1131.592192] it913x: DEV it913x Error
> > [ 1131.592271] usbcore: registered new interface driver it913x
> >
> > No frontend is generated anyway.
>
> Looks like the the firmware is not at all compatible with your device.
>
> Have you applied the patch cleanly to the latest media_build?
>
> These appear to be new version of the 9006. A supplier is sending me one
> of these devices.
>
> As a last resort see if the device works with dvb-usb-it9137-01.fw
>
> You will have force to use this firmware
> dvb-usb-it913x firmware=1

Here is a modified firmware loader for version 2 types.

The firmware must be as in original
./dvb_get_firmware it9135

dd if=dvb-usb-it9135.fw ibs=1 skip=12866 count=5817 of=dvb-usb-it9135-02.fw
Signed-off-by: default avatarMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 6a2329ad
......@@ -558,7 +558,7 @@ static int it913x_download_firmware(struct usb_device *udev,
const struct firmware *fw)
{
int ret = 0, i = 0, pos = 0;
u8 packet_size;
u8 packet_size, min_pkt;
u8 *fw_data;
ret = it913x_wr_reg(udev, DEV_0, I2C_CLK, I2C_CLK_100);
......@@ -570,11 +570,16 @@ static int it913x_download_firmware(struct usb_device *udev,
/* The firmware must start with 03 XX 00 */
/* and be the extact firmware length */
if (it913x_config.chip_ver == 2)
min_pkt = 0x11;
else
min_pkt = 0x19;
while (i <= fw->size) {
if (((fw->data[i] == 0x3) && (fw->data[i + 2] == 0x0))
|| (i == fw->size)) {
packet_size = i - pos;
if ((packet_size > 0x19) || (i == fw->size)) {
if ((packet_size > min_pkt) || (i == fw->size)) {
fw_data = (u8 *)(fw->data + pos);
pos += packet_size;
if (packet_size > 0)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment