Commit f1751cff authored by Sebastian Reichel's avatar Sebastian Reichel Committed by Benoit Cousson

ARM: dts: omap3-n900: Add support for SD cards

Add support for external SD card slot.
Signed-off-by: default avatarSebastian Reichel <sre@debian.org>
Signed-off-by: default avatarBenoit Cousson <bcousson@baylibre.com>
parent 7a89eecf
......@@ -65,6 +65,17 @@ i2c3_pins: pinmux_i2c3_pins {
0x194 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */
0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */
0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */
0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */
0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */
0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */
>;
};
};
&i2c1 {
......@@ -103,7 +114,11 @@ &i2c3 {
};
&mmc1 {
status = "disabled";
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
bus-width = <4>;
cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
};
&mmc2 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment